{"product_id":"williams-av-dl210-net-d-2-0-large-area-dual-channel-hearing-loop-dante™-amplifier","title":"Williams AV DL210 NET D 2.0 Large Area Dual Channel Hearing Loop Dante™ Amplifier","description":"\u003cp\u003eThe DL210 NET D 2.0 hearing loop amplifier maximizes modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation, and monitoring of the induction loop system via a laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression, and more. Powerful Class D pulse-width amplifier maximizes the efficiency of the unit. The Dante™ input provides integration with existing Dante™ devices and remote network management.\u003c\/p\u003e\n\u003cp\u003eThis assistive listening system’s design offers a dual 12 A rms loop output for dual loop or phased array configuration. A 70-100 V input connects to a distributed speaker\/paging system, ensuring announcements are heard by hearing aid users.\u003c\/p\u003e\n\u003cp\u003eMeet IEC 60118-4 standards on system performance when integrated into a correctly designed and installed system. The DL210 NET D 2.0 is also tested to IEC Specifications 62489-1 Benchmark Standards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNetwork control – allows control and calibration of unit remotely with application software\u003c\/li\u003e\n\u003cli\u003eHigh continuous current 12 Arms (17 Apk) per output continuous\u003c\/li\u003e\n\u003cli\u003eLCD Screen with VU metering, easy one-button menu control\u003c\/li\u003e\n\u003cli\u003eDSP Audio Processing\u003c\/li\u003e\n\u003cli\u003eDante™ Input\u003c\/li\u003e\n\u003cli\u003eUSB for firmware updates\u003c\/li\u003e\n\u003cli\u003eInput mixing, parametric equalization, compression, metal compensation, high and low-pass filters, AGC and audio delay\u003c\/li\u003e\n\u003cli\u003ePower-save mode\u003c\/li\u003e\n\u003cli\u003eAdjustable output delay for multiple amps in large venues\u003c\/li\u003e\n\u003cli\u003eFault warning and active protection against shorted or open circuits and overheating\u003c\/li\u003e\n\u003cli\u003eLoop fault relay output\u003c\/li\u003e\n\u003cli\u003eXLR and 3-position terminal block input configurable as microphone input or line-input, balanced or unbalanced.\u003c\/li\u003e\n\u003cli\u003eStandard 2 RU, 19” rackmount\u003c\/li\u003e\n\u003cli\u003eMagnetic signal couples directly to devices equipped with telecoils (T-coils) such as hearing aids, cochlear implants, or optional loop receivers.\u003c\/li\u003e\n\u003cli\u003eSuitable for phased-array or dual-loop systems.\u003c\/li\u003e\n\u003cli\u003ePhased-array mode automatically produces 90° phase shift in slave loop output\u003c\/li\u003e\n\u003cli\u003eMeets IEC Specification 60118-4 (when designed and commissioned properly)\u003c\/li\u003e\n\u003cli\u003eTested to IEC Specifications 62489-1 Benchmark Standards\u003c\/li\u003e\n\u003cli\u003eMeets ADA \/ ADAAG guidelines.\u003c\/li\u003e\n\u003cli\u003eSystem Includes:\u003c\/li\u003e\n\u003cli\u003e(1) DL 210 NET D 2.0 DSP – Induction Loop Amplifier\u003c\/li\u003e\n\u003cli\u003e(1) WLC 004 – Line Cord (US)\u003c\/li\u003e\n\u003cli\u003e(1) IDP 009 – ADA Wall Plaque (T-Coil)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 2 RU Rackmount, 19” W x 3.5” H x 12” D. Chassis is 17” W.\u003c\/li\u003e\n\u003cli\u003eWeight: 14.3 lbs (6.5 kg)\u003c\/li\u003e\n\u003cli\u003eColor: Case: Black, white and blue legends on front, white legends on back. LCD: Backlit Blue.\u003c\/li\u003e\n\u003cli\u003eFan cooling: Variable Speed, Temperature Controlled\u003c\/li\u003e\n\u003cli\u003ePower supply: Internal, Universal 100-240 VAC, 50\/60 Hz, 250 Watt. Fuse: 5 x 20 mm, 5 A, 250 V. AC power plug is IEC 320-C14.\u003c\/li\u003e\n\u003cli\u003eHeat output @ 120 VAC: Sleep state: 100 BTU\/hr; Idle state: 146 BTU\/hr; Driving two loops @ 12 A each: 1,040 BTU\/hr\u003c\/li\u003e\n\u003cli\u003eEthernet: (1x) RJ-45; 10-100 MBps.\u003c\/li\u003e\n\u003cli\u003eUSB: (1x) standard-B. USB 1.1, 2.0 or 3.0 supported.\u003c\/li\u003e\n\u003cli\u003eRS-232\/Loop fault relay: (1x) DB-9 jack. RS-232: Pin 2=Tx, Pin 3=Rx, Pin 5=gnd. Loop fault relay: Pin 1=NC, Pin 4=Common, Pin 6=NO. Relay contact rating: 2.0 A @ 30 VDC.\u003c\/li\u003e\n\u003cli\u003eEnvironment: 0-35° C ( 32-95° F), 0-90% relative humidity.\u003c\/li\u003e\n\u003cli\u003eCoverage area*\u003c\/li\u003e\n\u003cli\u003e31,400 sq. ft. (2,917 sq. m.) (Perimeter Loop, 1:1 aspect ratio, both outputs driven)\u003c\/li\u003e\n\u003cli\u003e51,660 sq. ft. (4,800 sq. m.) (Perimeter Loop, 3:1 aspect ratio, both outputs driven)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINPUTS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante input: No. Dante input available on DL210 NET D 2.0 model only.\u003c\/li\u003e\n\u003cli\u003eMic\/Line inputs: (2x) 3-position terminal block, input impedance=1.5 kΩ Mic, 10 kΩ Line. Configurable\/Accepts: Mic, Line -10 dBV, Line +4 dBu, or Line +8 dBu, balanced or unbalanced. Phantom supply (48V).\u003c\/li\u003e\n\u003cli\u003e70-100 V input: (1x) 2-position terminal block; high\/speaker-level input (accepts 25 V, 70 V or 100 V) from distributed audio\/paging systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOUTPUTS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLine outputs: (1x) 3-position terminal block; loop-through of Mic\/Line Input 1 [\u0026amp;] Line Input 2, +4 dBu, Balanced or Unbalanced. The line outputs mirror the audio of the loop output.\u003c\/li\u003e\n\u003cli\u003eLoop output(s): (1x) 2-position terminal block per output\u003c\/li\u003e\n\u003cli\u003eAudio output delay: Adjustable from 0 to 165 msec\u003c\/li\u003e\n\u003cli\u003eHeadphone output: (1x) 1\/4” stereo headphone jack, on front of unit. Monitored input or output selectable in menu.\u003c\/li\u003e\n\u003cli\u003eLoop fault relay: Integrated into RS-232 DB-9 jack. Pin 1=NC, Pin 4=Common, and Pin 6=NO. Contact rating: 2.0 A @ 30 VDC.\u003c\/li\u003e\n\u003cli\u003eLoop output drive voltage: 33.3 Vrms (47.1 Vpk) continuous\u003c\/li\u003e\n\u003cli\u003eRated loop output current*: 12 Arms(17 Apk) per output\u003c\/li\u003e\n\u003cli\u003eLoop resistance range: 0.5 Ω to 3.0 Ω (DC)\u003c\/li\u003e\n\u003cli\u003eSpeaker output: Integrated into Loop Output A terminal block (switchable in menu). 225 Watts x 1 channel @ 4Ω, 125 Watts x 1 channel @ 8Ω, (Class D). Frequency response = 20 Hz-20 kHz, THD=0.07%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated load*: 0.5 Ω DC with 135 µH inductance\u003c\/li\u003e\n\u003cli\u003eLoop frequency response: 45 Hz to 9.0 kHz ± 2 dB (1 kHz ref.)\u003c\/li\u003e\n\u003cli\u003eRated loop THD*: [lt]1 % at rated output current (1 kHz sine wave).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOTHER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront controls:Front LCD menu access\/adjustment via control button\/dial.\u003c\/li\u003e\n\u003cli\u003eAdjustable settings Input mixing, parametric equalization, compression, metal loss compensation, high and low-pass filters, AGC and audio delay, output levels. See User Manual for adjustment range(s).\u003c\/li\u003e\n\u003cli\u003eInternal calibration tools: Test tone generator with pink noise, loop current adjustment\/matching. See User Manual for details.\u003c\/li\u003e\n\u003cli\u003eOther features: Save\/load configuration, loop test, priority input selection with adjustable threshold, loop fault relay, open\/short and thermal protection. See User Manual for details.\u003c\/li\u003e\n\u003cli\u003eNetwork control [\u0026amp;] firmware Function control and calibration by DigiLoop PC App via ethernet (RJ-45). PC App requires Windows 7 or higher. Firmware updates through USB only.\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 years\u003c\/li\u003e\n\u003cli\u003eApprovals: CE, UL, ULC, FCC, Industry Canada, RoHS, WEEE, CB scheme, RCM\u003c\/li\u003e\n\u003cli\u003eStandards compliance: This product is designed to meet the IEC-60118-4 standard when correctly designed, installed and commissioned. Test Specifications provided to the IEC 62489-1 standard.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Williams AV","offers":[{"title":"Default Title","offer_id":42310800605263,"sku":"DL210 NET D 2.0","price":8978.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/DL210_Digi-Loop-transmitter_front_web1.webp?v=1732741728","url":"https:\/\/shop.musicredone.com\/products\/williams-av-dl210-net-d-2-0-large-area-dual-channel-hearing-loop-dante%e2%84%a2-amplifier","provider":"RedOne Music Canada","version":"1.0","type":"link"}