{"product_id":"glensound-interpreter-box-a-box-for-simultaneous-interpretation","title":"Glensound INTERPRETER BOX A Box For Simultaneous Interpretation","description":"\u003cp\u003eThe Interpreter Box provides a dedicated solution for those requiring a simultaneous interpretation unit for a single user.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput\u003c\/strong\u003e\u003cbr\u003eThere is a single mic input which can be connected via a rear panel or top panel XLR socket.  This input is switchable on the rear between a dynamic input or a 48V phantom power input.  There is also an adjustable gain pot on the rear, with a front panel meter to help with setting the input level.  Glensound's Referee compressor\/limiter system can be switched on or off but is recommended to prevent input clipping.  \u003c\/p\u003e\n\u003cp\u003eThe top panel XLR socket is suitable for gooseneck microphones.  The mic can be switched on or off via a top panel toggle switch.  'Mic on' is indicated via a very large and clear top panel light, so that the user can clearly see the mic status.  There is also a separate momentary 'cough' button which mutes the mic output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeadphones\u003c\/strong\u003e\u003cbr\u003eThere is a single headphone amplifier that is available on a 6.35mm jack socket or on a 3.5mm jack socket.  These connections are paralleled and available via the front panel or the rear panel.  There is an external (floor) input to monitor the audio to be interpreted.  You can also monitor a separate Interpreter Box (language) - see detail under CM Bus below.  The monitored audio can be adjusted for level and has two band EQ. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCM BUS\u003c\/strong\u003e\u003cbr\u003eThe rear panel also contains two RJ45 sockets for CAT 5 linking multiple Interpreter boxes together.\u003cbr\u003eThe CM bus carries audio between units and control logic.\u003c\/p\u003e\n\u003cp\u003eIf two or more units are linked together on the CM bus then:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe output of all the linked boxes will be the same\u003c\/li\u003e\n\u003cli\u003eThe last interpreter to turn their microphone on will be sending audio to the output\u003c\/li\u003e\n\u003cli\u003eTurning a microphone on on one box will turn the microphone off on any linked boxes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe CM bus also provides the 'Language' input to the Interpreter's headphone feed. This is the same audio as is being sent to the output and allows one interpreter to follow another's interpreted output instead of the floor input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003cbr\u003eThe main out is available via a balanced rear panel XLR plug, or in parallel with an unbalanced RCA phono socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMains Powered\u003cbr\u003e\u003c\/strong\u003eThe unit is powered by a low noise internal switch mode mains power supply. It accepts any AC voltage input from 100 - 240 VAC. The input is a professional filtered IEC socket. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically designed for interpreters\u003c\/li\u003e\n\u003cli\u003eSingle user unit\u003c\/li\u003e\n\u003cli\u003eLarge and clear mic live light\u003c\/li\u003e\n\u003cli\u003eRear panel mic or top panel for gooseneck mics\u003c\/li\u003e\n\u003cli\u003eMonitor floor input or looped language from another Interpreter Box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Interpreter Box although designed for simultaneous interpretation use is built to full broadcast audio specifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMicrophone Input:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Mic gain range: -42 to -66 dB (for 0dBu balanced output)\u003c\/li\u003e\n\u003cli\u003eMic with Phantom power gain range: -30 to -54 dB (for 0dBu balanced output)\u003c\/li\u003e\n\u003cli\u003eMaximum input before clipping (dynamic): -17 dBu\u003c\/li\u003e\n\u003cli\u003eMaximum input before clipping (phantom power): -5 dBu\u003c\/li\u003e\n\u003cli\u003eEquivalent input noise: -121 dBu (terminated 330 Ohm, 22Hz to 22kHz, unweighted)\u003c\/li\u003e\n\u003cli\u003eDistortion @ +8dBu output: 100Hz \u0026lt;= 0.04%, 1kHz \u0026lt;= 0.04%, 10kHz \u0026lt;= 0.04%\u003c\/li\u003e\n\u003cli\u003eFrequency response: Flat 80Hz to 10kHz, Rolled off -1dB @ 40Hz and -3dB @ 20kHz for intelligibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeadphone Circuit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFloor Input range: -29 to +1 dB \u003c\/li\u003e\n\u003cli\u003eVolume Pot range: -20 to +10 dB\u003c\/li\u003e\n\u003cli\u003eNoise @ line up: -89dBu unweighted 22Hz to 22kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response: Flat 40Hz to 22kHz\u003c\/li\u003e\n\u003cli\u003eDistortion @ 8dBu: 100Hz \u0026lt;= 0.011%, 1kHz \u0026lt;= 0.013%, 10kHz \u0026lt;= 0.009%\u003c\/li\u003e\n\u003cli\u003eTone controls: +\/- 10dBu @ 100Hz and 5kHz\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45158346686543,"sku":"INTERPRETER BOX","price":1785.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_74b00945-c7ba-4429-b3ca-37a5a6e93b36.jpg?v=1777579195","url":"https:\/\/shop.musicredone.com\/products\/glensound-interpreter-box-a-box-for-simultaneous-interpretation","provider":"RedOne Music Canada","version":"1.0","type":"link"}