{"product_id":"glensound-bella-16-dante-aes67-confidence-monitor-mixer-level-control","title":"Glensound BELLA 16 Dante\/ AES67 Confidence Monitor, Mixer \u0026 Level Control","description":"\u003cp\u003eBella 16 is a 2 buss summing matrix confidence monitor designed for outside broadcast trucks, studios, theatre and professional audio applications. It is perfect for easy and cost effective monitoring of multiple network audio sources, ideal for busy production environments and perfect for monitoring multiple network intercom \u0026amp; programme feeds.\u003c\/p\u003e\n\u003cp\u003eThe 2 front panel loudspeakers are driven from a DSP to compensate for their size.  The result is surprisingly good, with clear crisp vocals and highly intelligible reproduction of wider band audio sources. They are driven from a class D amplifier and have more than sufficient output level for most environments.\u003c\/p\u003e\n\u003cp\u003eRobust proven construction techniques, simple reliable interface and excellent specification will help make your technician’s life hassle free, whilst the low cost and long asset life will keep the accountant satisfied.\u003cbr\u003e\u003cbr\u003eAlso Available \u003cbr\u003eBella 4\u003cbr\u003eBella 16\/R\u003cbr\u003eBella 22\u003cbr\u003eBella 22\/R\u003cbr\u003eBella 32\u003cbr\u003eBella 32\/R\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e16 Network Audio Inputs\u003cbr\u003e\u003c\/strong\u003eThere are in total 16 network audio inputs that can be routed to the Bella 16.   These are at 96kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2 Analogue Audio Inputs\u003cbr\u003e\u003c\/strong\u003eThe output can be selected from either the AoIP input source or from a pair of balanced line level analogue inputs located on XLRs fitted on the rear panel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChannel On\/ Solo Buttons\u003cbr\u003e\u003c\/strong\u003eEach of the 16 inputs has a single channel on\/ off switch. These switches are bright yellow illuminated push switches and operate in two ways. A short press turns the channel on\/ off or a long hold solos that channels inputs.\u003c\/p\u003e\n\u003cp\u003eThese switches affect the loudspeaker, headphone, analogue, AES3 and mix\/ solo network outputs.  They do not affect the 2nd mix buss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLevel Control\u003cbr\u003e\u003c\/strong\u003eTo produce a monitor mix suitable for the operator’s application, each of the 16 input channels has a gain function.  Holding the button allows the input gain to be adjusted using the fron panel encoder.  This can increase input gain by 10dB and can also reduce the input level by up to 30dB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFront Panel Loudspeakers\u003cbr\u003e\u003c\/strong\u003eTwo front panel elliptical loudspeakers are fitted. When choosing these speakers we did extensive listening tests to every possible speaker that we could find on the market that would fit on a 1RU panel. The speakers that we chose and are fitted were the clear winners and had much clearer sounding vocals than all the other tested drive units.\u003c\/p\u003e\n\u003cp\u003eIt is possible to completely turn off the front panel loudspeakers in case you’re using external speakers for monitoring. In this case the Dim and Cut controls still work as expected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDigital Signal Processing of Internal Loudspeakers\u003cbr\u003e\u003c\/strong\u003eHowever good they are, small loudspeakers have fundamental acoustical limitations.  To provide the best possible audible solution for you, we carefully measured the speakers fitted in the complete Bella 16 enclosure and provided advanced multi-point digital filtering to enhance the sound as much as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Level Control\u003cbr\u003e\u003c\/strong\u003eA front panel level control is provided alongside the input switches. This adjusts the overall output level to the loudspeakers, headphone and main mix outputs, or individual input levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDim \u0026amp; Cut Controls\u003cbr\u003e\u003c\/strong\u003eFront panel illuminated switches are provided to Cut and Dim the outputs. External GPI loop inputs are also provided to allow the outputs to be cut or dimmed from external switches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeadphone Output\u003cbr\u003e\u003c\/strong\u003eA front panel 6.35mm stereo headphone jack socket is provided to allow the operator to monitor the Bella’s output on headphones. Plugging in a pair of headphones automatically cuts the loudspeaker \u0026amp; analogue\/ AES3 mix outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree Analogue Outputs\u003cbr\u003e\u003c\/strong\u003eThree balanced line level XLR analogue outputs are provided on the rear panel. There is a left and right output of the mix\/ solo and a mono output (which is a sum of the left and right outputs). These outputs are all post front panel level control and Dim and Cut circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBalanced AES3 Output\u003cbr\u003e\u003c\/strong\u003eOne single AES3 output on a rear panel XLR is also provided. This is the left and right output mix\/ solo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Audio Outputs\u003cbr\u003e\u003c\/strong\u003eIn total there are 16 network audio outputs, the block diagram shows these in detail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Interface\u003cbr\u003e\u003c\/strong\u003eOur widely used Dante\/ AES67 network interface is implemented in the Bella 16. It features 4 network ports, 2 x copper and 2 x SFP slots (normally used for fibre). These network ports can be set to operate in fully redundant mode or as a network switch for connecting to other equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower\u003cbr\u003e\u003c\/strong\u003eFor versatility \u0026amp; redundancy there are 3 power options. An internal wide range mains supply \u0026amp; either of the 2 copper network interfaces can power the unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGroups\u003c\/strong\u003e\u003cbr\u003eTwo front panel group switches are available making it very easy for an operator to switch between two commonly used sets of audio circuits for monitoring. It is very easy for an operator to add\/ remove sources from the groups.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReset Button\u003c\/strong\u003e\u003cbr\u003eA reset button is provided for returning all the inputs to unity gain and panned centre. Very useful if the Bella 32 is being used by different operators at different events. To prevent accidental usage the reset button must be pressed for at least three seconds before a reset will be initiated.\u003c\/p\u003e\n\u003cp\u003eALSO AVAILABLE IN RAVENENNA\/AES67 VERSION\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e16 Network Audio channels + 2 local\u003c\/li\u003e\n\u003cli\u003e2 Preset mix groups available \u003c\/li\u003e\n\u003cli\u003eDante\/AES67 or Ravenna versions available\u003c\/li\u003e\n\u003cli\u003eEach input has a signal present indicator\u003c\/li\u003e\n\u003cli\u003eAdjustable in\/out gain levels\u003c\/li\u003e\n\u003cli\u003e1U 19\" Rack mount. \u003c\/li\u003e\n\u003cli\u003eAlso Available in AES67\/Ravenna Version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAUDIO\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChannel Input Gain Controls: +10.6 to -31dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoudspeaker\/ Headphone Gain Control: +10.6 to -31dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChannel Off Switch: Fully muted (- infinity dB) when off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalogue Input Type: Electronically balanced (can be wired unbalanced)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalogue Input Impedance: \u0026gt;20kOhms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalogue Input Connectors: Neutrik XLRs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalogue Input Line Up: Line level (0dBu)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalogue Input Frequency Response: \u0026gt;=-0.5dB 22Hz to 22kHz (Measured at Mix Output Mono)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalogue Input THD + Noise (ref +8dBu): \u0026gt;=0.004% @ 1kHz \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalogue Output Type: Electronically Balanced\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalogue Output Connectors: Neutrik XLRs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalogue Output Impedance: =Maximum Analogue Output Level: +17.4dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalogue Output Frequency Response: \u0026gt;=-0.1dB 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAnalogue Out THD + Noise (ref +8dBu): \u0026lt;0.002% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Impedance: 100 - 1000 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Headphone Level: +17dBu into 600 Ohms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSIZE AND POWER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 19\" Wide, 1RU High, 164mm deep (excluding connectors\/ controls)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 1740g\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 4Kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Carton:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExport Quality cardboard carton\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e62 x 41 x 12 cms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMains Input: 100 to 240 VAC 50\/60Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Consumption: PoE (Power Over Ethernet): Maybe powered by standard PoE on either copper network interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: 0 to +50°C (32 to 122°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70°C (-4 to 158°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 0 to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRJ45 Cable: 1 x 2M RJ45 network cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHandbook: Available by download \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMains Cable: 1 x IEC Mains Cable (UK \u0026amp; Europe Only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK OPTIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDANTE\/AES67 VERSION\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSample Frequency: 48K\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution: 24 Bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; Routing: Via Free Dante Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Can be configured for AES67\u003c\/li\u003e\n\u003cli\u003eRAVENNA\/AES67 VERSION\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Sample Rates: 44.1kHz - 192kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePTPv2: Master or Slave, IEEE-1588-2008 standard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST 2110-30: Yes. Including level C and CX\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST2022-7: Yes. Seamless data switching\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNMOS IS-04 (Disovery): Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNMOS IS-05 Routing): Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemote Control: Web browser or Aneman\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45135985213519,"sku":"BELLA 16","price":4285.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_ec003a68-2c75-4a71-98de-5ed65b01b59b.jpg?v=1776966292","url":"https:\/\/shop.musicredone.com\/products\/glensound-bella-16-dante-aes67-confidence-monitor-mixer-level-control","provider":"RedOne Music Canada","version":"1.0","type":"link"}