{"product_id":"glensound-beatrice-p2-phone-handset-dante-network-intercom","title":"Glensound Beatrice P2 Phone Handset Dante Network Intercom","description":"\u003cp\u003eThe Beatrice P2 is a two channel handset.\u003c\/p\u003e\n\u003cp\u003eThe user of the handset on the P2 unit can listen to two audio feeds from the network and send two audio channels out onto the network. Depending upon how the Dante® network has been routed, the incoming audio circuits and outgoing circuits can be different locations and the outgoing circuits can be routed to multiple locations.\u003c\/p\u003e\n\u003cp\u003eAudio to the handset from the two network sources is routed to the telephone's earpiece only when the handset is off the hook. When the handset is picked up (off hook), the handset's microphone is turned on and two switches allow the operator to route the handset's microphone to one or other (or both) of the outgoing network audio channels.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Beatrice P2 unit is fully compatible with other manufacturers' equipment using the Dante protocol.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Amp with Compressor and Phantom Power\u003cbr\u003e\u003c\/strong\u003eA good quality, clear sounding microphone amplifier, designed for communication purposes, is fitted to the output of the handset's microphone capsule, which also has the benefit of a compressor\/ limiter circuit to help keep levels and intelligibility consistent even when the operator gets overly excited. The gain of the microphone amplifier can be adjusted in the menu system to suit your working environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHandset Loudspeaker Amp With Volume Control\u003c\/strong\u003e\u003cbr\u003eA low noise amplifier is fitted to provide the best possible output to the handset's earpiece. A volume control is provided to allow the user to easily adjust the volume of the handset’s earpiece.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncoming Level Gain\u003c\/strong\u003e\u003cbr\u003eAs well as the volume control adjusting the audio level to the telephone handset’s earpiece, it is possible by using the menu system to adjust the gain of the incoming network audio circuit(s).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Cable For Power \u0026amp; Audio\u003c\/strong\u003e\u003cbr\u003eOne single standard RJ45 network cable provides both power (PoE) and bi-directional multichannel digital audio (Dante®\/ AES67 compliant).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCall Function\u003c\/strong\u003e\u003cbr\u003eA simple call function is inbuilt allowing the operator of one unit to call\/alert other users that they want to communicate with them. To call another user the operator double taps the speak key of the channel they want to call (P2) or the dedicated call key (P1).  This then flashes a bright yellow call LED on the other user's keypanel (if fitted), which continues to flash until the call is answered. As well as flashing a LED at the receiving end of the call an audible ‘beep’ can be set to alert the user that an incoming call has been placed to them.\u003cbr\u003eWhen the P1 or P2 receives a call, a very large red LED will flash to attract the operator's attention. An extra pair of small LEDs are also fitted on the P2 to indicate which of the 2 incoming channels generated the call signal. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eIt is possible to disable the call functionality if required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK \/ DANTE® INTERFACE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical Interface: 1 off RJ45 Neutrik Ethercon\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudio Sample Frequency: 48kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudio Resolution: 24 Bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransfer Rate: 100Mbps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDante Chipset: Ultimo UXT-01-004\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNote: Audinate recommends no more than 10 Ultimo chipsets on one network UNLESS another Dante® device such as the Brooklyn Module (found in 8 channel Beatrice\/ Dark units), is on the same network.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67 Compliant: The Audinate Ultimo chipset is AES67 compliant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsumption\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoE: Powered by PoE Complies to: IEEE 802.3af-2003 Classification Class 0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChassis Mechanics: All aluminium with laser etched panels and light textured black powder coated sides.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTelephone Handset: Interquartz 9826N\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize (Body excluding Beltclip): 120 x 280 x 95(inc handset 45 ex) mm (w x l x h)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 835g \/ 1lb 8oz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 2kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Size: 62 x 41 x 17cms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Carton: Rugged export quality cardboard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature:  0 to +50°C (32 to 122°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70°C (-4 to 158°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 0 to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCALL CIRCUIT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInband Calling Frequency: 20kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAmplitude: -20dBFs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDuration Of Signal: 2 seconds\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatibility: All Glensound Beatrice units \u0026amp; Studio technologies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook: By download\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable: 2 metre Cat5 RJ45plug \/RJ45plug cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45131638734927,"sku":"Beatrice P2","price":1448.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_aec981bf-a552-4379-a681-d0e67e52e7ab.jpg?v=1776885369","url":"https:\/\/shop.musicredone.com\/products\/glensound-beatrice-p2-phone-handset-dante-network-intercom","provider":"RedOne Music Canada","version":"1.0","type":"link"}