{"product_id":"glensound-aoip-22m-two-channel-dante-mic-amp-with-2-channel-return","title":"Glensound AoIP-22M Two Channel Dante Mic Amp With 2 Channel Return","description":"\u003cp\u003eThe AoIP22M is a rugged unit, designed for broadcast, theatre and location applications. It can be used as a 2 input, 2 output device between analogue audio and Dante\/AES67 network audio.\u003cbr\u003eThe AoIP22M can also be used as a 2 channel mic amp into Dante\/AES67 with 2 analogue return channels from the network. PoE power means that only a single cable is needed to connect to the network to carry both audio and power. USB C power is also available for plug top USB supplies or using USB power bricks.\u003cbr\u003eThe network can operate from 44.1-96 kHz using Dante, or 48kHz on AES67.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMic or Line Inputs\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThe two analogue inputs are on XLR connections and can be switched independently between mic or line level. 48v phantom power can be selected separately per input, and is indicated as active on the front panel.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSecure Gain Adjusts\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eEach input has the gain adjust on a small, spring loaded pot. Pushing it in releases it into the adjust position, and when the level is set, it can be pushed back flush to the front panel to avoid accidental adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e7 Segment PPM Meters\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eEach input has a three colour, 7 LED PPM meter to help with the correct setting of input gain level.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAdjustable Line Up Levels For Worldwide Standards\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eOutput levels can be set with different firmware to be -18dBfs, -20dBfs, or -24dBfs.\u003cbr\u003eThe AoIP22M is digitally controlled. This allows us to have additional functionality that can be easily selected with the front panel switches. The switch function is detailed on the top panel as shown above.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDante Mic Amp \u0026amp; Analogue Mic Amp\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThe output of each mic amp can be separately selected in two modes of operation:\u003cbr\u003e-\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eMic In\u003c\/strong\u003e\u003cbr\u003eIn this mode the output is the line level of the mic input. In other words, the channel is operating as a normal analogue microphone amplifier.\u003cbr\u003e\u003cstrong\u003e- Dante\u003c\/strong\u003e\u003cbr\u003eIn this mode the output is the line level return audio from the Dante network.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 x High Pass Filter (HPF) Settings\u003c\/strong\u003e\u003cbr\u003eA high pass filter is selectable on each input channel and can be set at 20Hz, 30Hz or 60Hz. This is particularly useful when the AoIP22M is being used as a mic amp as it reduces the audio level below the filter point.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e3 x Compressor Settings\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e(applicable in mic and line mode)\u003cbr\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOff\u003c\/strong\u003e\u003cbr\u003eClean input with no compressor.\u003cbr\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSoft\u003c\/strong\u003e\u003cbr\u003eWhen set to ‘soft’ the AoIP22M uses the Glensound Referee compressor. The Referee compressor does not affect the overall dynamics of the input like a traditional compressor. It only becomes active as the input signal approaches clipping, at which point a progressively curved compressor is applied. The compression gets harder and harder up to the clip point to prevent clipping from occurring.\u003cbr\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHard\u003c\/strong\u003e\u003cbr\u003eA hard compressor at a ratio of 4:1.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eEthernet Connection\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eHalo EtherCON\u003c\/p\u003e\n\u003cp\u003eThe AoIP22M uses the latest Neutrik Halo EtherCON connector for the network connection. This is a standard XLR size and allows the connection of standard RJ45 network cables, as well as the more secure locking EtherCON plugs.\u003cbr\u003eThe outer ring of the EtherCON shows power and data traffic via its LED ring, without the need for separate LED indicator lights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePower Options\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePower Over Ethernet (PoE)\u003c\/strong\u003e\u003cbr\u003eThe AoIP22M can be powered via its network connection when connected to a PoE switch. It can also receive power from a mid span PoE injector if the switch being used does not have PoE.\u003cbr\u003e-\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eUSB C\u003c\/strong\u003e\u003cbr\u003eA 5V, 3A USB C input can also power the AoIP22M. This can be via a USB C plug top power supply, a PC, or a USB power bank, making the AoIP22M truly portable.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThe AoIP22M Case\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eTwo Part Extruded Enclosure\u003cbr\u003e\u003c\/strong\u003eUsing an extruded aluminium enclosure for the body of the AoIP22M makes it extremely strong and resistant to knocks and crush damage.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCustom Made End Bumpers\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThe end bumpers were custom made to provide the functionality that is expected from small Glensound units:\u003cbr\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003cbr\u003eAs the end bumpers are oversized, they provide a high degree of protection for all corners of the unit should it be dropped.\u003cbr\u003e-\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eStanding\u003c\/strong\u003e\u003cbr\u003eThe bumpers mean that the AoIP22M can stand flat on its end if required.\u003cbr\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003cbr\u003eThe AoIP22M provides fixing holes on the corners to allow mounting underdesks or on the inside of racks. These mounting holes are also often used as cable tie down points for easy temporary fixing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo analogue mic\/line inputs on XLR\u003c\/li\u003e\n\u003cli\u003eSelectable 48v\u003c\/li\u003e\n\u003cli\u003eIndependent gain controls\u003c\/li\u003e\n\u003cli\u003ePOE \u0026amp; USB C power\u003c\/li\u003e\n\u003cli\u003eUp to 96k\/24bit with Dante\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePOWER\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoE Powered by the PoE network port\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eComplies to: IEEE 802.3af-2003\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eClassification Class 0\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC: 12V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eConsumption\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower On LED: Bright Blue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante: Yes using the Ultimo module\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67 Compliiant: Yes\u003c\/li\u003e\n\u003cli\u003eSMPTE ST-2110-30 Compliant: No\u003c\/li\u003e\n\u003cli\u003eNumber Of Nework Interfaces: 1\u003c\/li\u003e\n\u003cli\u003eCopper Ethernet: 1x Neutrik EtherCON Connector\u003c\/li\u003e\n\u003cli\u003eFibre Ethernet: No\u003c\/li\u003e\n\u003cli\u003eTransfer Rate: 100 Mbps\u003c\/li\u003e\n\u003cli\u003eDante Network Sample Rate: 44.1k, 48k, 88.2k, 96k\u003c\/li\u003e\n\u003cli\u003eAES67 Network Sample Rate: 48k\u003c\/li\u003e\n\u003cli\u003eResolution: 24 bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic Input Gain Range: 25dB - 68dB\u003c\/li\u003e\n\u003cli\u003ePhantom Power: 48v\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: 123.9dBu\/150r source\/20Hz-22kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Responce @ -1dB: \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHPF off:   27Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHPF low:  43Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHPF high: 86Hz to 22kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePPM Meter\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTri-Colour, 7 Segment LED per channel: Line up level indicated on panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompressor\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree Compressor Options:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOff:   No compression active\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoft: 'Referee' clip limitiong only\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHard: 4:1 \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Pass Filter @-3dB\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree HPF settings:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOff:   27Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow:  43Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh: 86Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Options\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo output options, configurable per channel:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1: return from network\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2: line level output from local input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 125 x 122 x 48 mm (WxDxH)\u003c\/li\u003e\n\u003cli\u003eWeight: 540g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMechanics\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll aluminium construction. Anodized and laser etched.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFront and rear hard rubber bumpers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: 0 to +50 oC (32 to 122 oF)\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70 oC (-4° to 158 oF)\u003c\/li\u003e\n\u003cli\u003eRelative Humidty: 0 to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded Items\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAvailable by download\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 metre Cat5 RJ45 plug \/RJ45 plug cable \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45135978135631,"sku":"AoIP-22M","price":1074.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_ef73489d-3944-4059-bed2-e07e42e9f2e9.jpg?v=1776964874","url":"https:\/\/shop.musicredone.com\/products\/glensound-aoip-22m-two-channel-dante-mic-amp-with-2-channel-return","provider":"RedOne Music Canada","version":"1.0","type":"link"}