{"product_id":"chamsys-genetix-gn10r-multipurpose-node-with-rj45-connectors-10-ports","title":"Chamsys GENETIX GN10R Multipurpose Node With RJ45 Connectors - 10 Ports","description":"\u003cp\u003e\u003cstrong\u003eGeNetix Node 10R\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eis a multipurpose node that provides a solution for remote data distribution in a wide variety of applications, notably offering support for Timecode, MIDI and 10Scene. The R version of our GN10 series comes fitted with RJ45 Ethernet connectors for the DMX outputs that make it well-suited for permanent installation projects.\u003c\/p\u003e\n\u003cp\u003eThis universal interface supports Art-Net, sACN, RDM and like all GeNetix nodes is fully configurable from ChamSys consoles, via its in-built web server or via the display on the unit. Its DMX ports are fully configurable, allowing for use as DMX Input or Output and has configurable DMX timings. With two network ports, GeNetix Node 10R can be either PoE or Mains powered via its powerCON TRUE1 line input. This versatile device is at home in many different environments as a standalone interface, truss-mounted in the rig via its M12 receiver or rack mounted via its rack ears.\u003c\/p\u003e\n\u003cp\u003eThe interface’s LTC and MIDI ports provide both Timecode and MIDI notes input\/output to MagicQ systems over ChamNet as well as supporting Art-Net timecode compatible with any system supporting this, making GeNetix Node 10R ideal for applications where the Timecode or MIDI source is away from the console.\u003c\/p\u003e\n\u003cp\u003eWhen connected to MagicQ PC Systems via USB, GeNetix Node 10R unlocks MagicQ PC Systems in Full Unlocked Mode, acting not only as a DMX interface, but also as a Timecode, MIDI and 10Scene gateway, making the full power of MagicQ software available to systems running on Linux, Mac or PC. When used as an Art-Net\/sACN node the GeNetix Node 10R unlocks up to 2 MagicQ Instances via Network.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 RDM DMX Ports with RJ45 connectors supporting Input and Output\u003c\/li\u003e\n\u003cli\u003eSupports Art-Net \u0026amp; sACN\u003c\/li\u003e\n\u003cli\u003eLTC \u0026amp; MIDI Timecode over Ethernet\u003c\/li\u003e\n\u003cli\u003eMIDI Notes over Ethernet\u003c\/li\u003e\n\u003cli\u003eRecall Scenes via UDP commands\u003c\/li\u003e\n\u003cli\u003eWebserver for remote configuration\u003c\/li\u003e\n\u003cli\u003eIn-built display and encoder for local configuration\u003c\/li\u003e\n\u003cli\u003eFull Unlock of MagicQ PC Systems when connected via USB\u003c\/li\u003e\n\u003cli\u003eFull Unlock of up to 2 MagicQ Instances when connected via Network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGeNetix Nodes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeNetix Nodes provide a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, Merging and Scene Storage\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeNetix Protocols\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeNetix network nodes support industry standard lighting protocols; Art-Net V1,2,3 and 4, sACN – including priorities on a per universe basis and Remote Device Management (RDM).\u003c\/p\u003e\n\u003cp\u003eDMX timings are fully configurable, with refresh rate, break time, frame time and MAB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDMX Fallback\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDMX Fallback enables fixtures on a single universe to be connected in a loop to two ports on the GeNetix node for redundancy. If a single cable is broken anywhere in the DMX loop, all fixtures can still receive DMX.\u003c\/p\u003e\n\u003cp\u003eIndividual ports can be set to Output, Input or Fallback.\u003c\/p\u003e\n\u003cp\u003eDMX Fallback is supported within a GeNetix node and also between multiple GeNetix nodes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMerging\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeNetix nodes support merging, configurable per port. The merge options are: None, HTP, LTP, Lowest IP address, Highest IP address.\u003c\/p\u003e\n\u003cp\u003eWhen set to HTP, for each of the channels on that universe the node uses the highest level received from all sources sending to that universe.\u003c\/p\u003e\n\u003cp\u003eWhen set to LTP, for each of the channels the node uses the data received from the latest source. The node only changes to data from the other source when the data from that source has changed in value, or when the first source has been timed out. LTP merging is only supported for a maximum of two sources.\u003c\/p\u003e\n\u003cp\u003eWhen set to Highest IP address or Lowest IP address the node merges each universe based on the data from the source with the highest or lowest IP address respectively. For example, a house system can be set as a very low IP address and then merging set to “highest IP” to enable incoming consoles to have priority over the house system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eScenes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeNetix nodes support storage of 10 Scenes that can be recorded from the incoming Art-Net or sACN data. Scenes contain DMX data for one or more ports on the node.\u003c\/p\u003e\n\u003cp\u003eScenes can be replayed from either the node front panel, from the MagicQ \/ QuickQ Console, via the webserver or via 10Scene wall plates on the GN5 \u0026amp; GN10 Nodes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNode Configuration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe GeNetix network nodes can be configured from MagicQ consoles and PC systems and from QuickQ consoles. They can also all be configured from a web server. The nodes with a front panel can also be configured from the front panel.\u003c\/p\u003e\n\u003cp\u003eGeNetix nodes also support a lock PIN to prevent the configuration being modified from the front panel of the GeNetix\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLost Data Behaviour\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeNetix Nodes support 3 modes for when the node loses network data (Art-Net or sACN)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold –\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHolds the last output DMX values\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone –\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStops outputting DMX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZeroes –\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOutputs DMX 0’s on all channels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDMX synchronisation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeNetix nodes support synchronised DMX output to reduce tearing. Synchronisation is controlled via ChamNet and is available when used with MagicQ consoles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eRDM Direct DMX Ports (with RJ45 connectors): 10\u003c\/li\u003e\n\u003cli\u003eNetwork Ports: 2\u003c\/li\u003e\n\u003cli\u003eMIDI Ports: 2 (1 in, 1 out)\u003c\/li\u003e\n\u003cli\u003eLTC Timecode Ports: 2 (1 in, 1 out)\u003c\/li\u003e\n\u003cli\u003e10Scene Ports: 1\u003c\/li\u003e\n\u003cli\u003ePoE Input: Yes (Port 1)\u003c\/li\u003e\n\u003cli\u003eUSB Ports: 1 USB-C\u003c\/li\u003e\n\u003cli\u003eKensington Security Lock Fixing: Yes\u003c\/li\u003e\n\u003cli\u003ePower Input, Neutrik powerCON TRUE1 110 to 240 VAC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware (When used with PC Systems)\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eArt-Net\/sACN: Yes\u003c\/li\u003e\n\u003cli\u003eChamNet Support: Yes\u003c\/li\u003e\n\u003cli\u003eLTC \u0026amp; MIDI Timecode over ChamNet: Yes\u003c\/li\u003e\n\u003cli\u003eMIDI Notes over ChamNet: Yes\u003c\/li\u003e\n\u003cli\u003e10Scene Gateway Functionality: Yes\u003c\/li\u003e\n\u003cli\u003eConfigurable DMX Timings: Yes\u003c\/li\u003e\n\u003cli\u003eWeb Server: Yes\u003c\/li\u003e\n\u003cli\u003eDMX Redundancy Support: Yes\u003c\/li\u003e\n\u003cli\u003eUser Scene Store: Yes\u003c\/li\u003e\n\u003cli\u003eRecall Scenes Via UDP: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (HxWxD): \u003c\/strong\u003e1.75 x 18.9 x 8.59 inch (44.4 x 480 x 218 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight: \u003c\/strong\u003e6.06 lb (2.75 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNeutrik powerCON TRUE1 Power Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Chamsys","offers":[{"title":"Default Title","offer_id":43313557962831,"sku":"GENETIX-GN10-R","price":2325.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/GENETIXGN10R.jpg?v=1751980134","url":"https:\/\/shop.musicredone.com\/products\/chamsys-genetix-gn10r-multipurpose-node-with-rj45-connectors-10-ports","provider":"RedOne Music Canada","version":"1.0","type":"link"}