{"title":"Glensound","description":"\u003cp\u003e1 Year Warranty\u003c\/p\u003e","products":[{"product_id":"glensound-aoip-44-4x4-dante-interface","title":"Glensound AOIP-44 4x4 Dante Interface","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003eAoIP44\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eis an economical subrack designed to interface balanced analogue audio circuits to and from a Network audio system featuring Dante. It provides 4 audio inputs to the network and also 4 audio outputs from the network on balanced 3 pin XLRs. As well as being mains powered with the standard signature backup DC powering option, the AoIP44 can be powered from an external PoE source via its network interface.\u003c\/p\u003e\n\u003cp\u003eThe AoIP can be used as a simple low cost audio I\/O break out unit on a large Dante audio network where it can be integrated extremely easily using the Dante controller and is fully compatible with any manufacturers Dante equipment. It can also be used in very simple audio over IP scenarios where just 4 bi-directional audio circuits are needed to be distributed across a building's network infrastructure, in which case 2 x AoIP44 units can be used connected together across the network. The AoIP44 is equally suited for high integrity broadcast purposes, intercom, just simple paging facilities or simple distribution of non-critical audio.\u003c\/p\u003e\n\u003cp\u003eBeing part of our Signature Range the AoIP44 comes as standard with removable rack ears (to allow front or rear mounting in 19\" racks), mounting holes to allow under desk mounting (the holes are equally suited for screwing the unit into odd places!) and an optional external DC power supply for applications requiring redundant power supplies. It is housed in an all anodized aluminum chassis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple economical Audio Over IP (AoIP) interface featuring Dante \/ AES67\u003c\/li\u003e\n\u003cli\u003e4 balanced audio inputs to the network\u003c\/li\u003e\n\u003cli\u003e4 balanced audio outputs from the network\u003c\/li\u003e\n\u003cli\u003e19\" 1RU subrack\u003c\/li\u003e\n\u003cli\u003eSubrack can be mounted with audio\/ mains\/ network connectors at the front or rear of the subrack\u003c\/li\u003e\n\u003cli\u003eHigh quality audio circuits (designed for Broadcast)\u003c\/li\u003e\n\u003cli\u003eInternal switch mode mains power supply\u003c\/li\u003e\n\u003cli\u003eCan be powered by PoE\u003c\/li\u003e\n\u003cli\u003eBack up DC power supply option\u003c\/li\u003e\n\u003cli\u003eSingle Cat5 copper Ethernet interface on Neutrik Ethercon\u003c\/li\u003e\n\u003cli\u003ePart of our Signature Range\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":43513454526543,"sku":"AOIP-44","price":1428.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_64764289-49bc-4bd0-a05c-793f16dd73e3.jpg?v=1755188134"},{"product_id":"glensound-vittoria-dd-dante-to-dante-network-bridge","title":"Glensound VITTORIA DD Dante To Dante Network Bridge","description":"\u003cp\u003eThe Vittoria provides a bridge between two internal and separate Dante networks. These networks are completely isolated from each other with 100% network security, providing a complete network firewall. Vittoria links 32 channels from each network directly in DSP, allowing the passing of bi-directional audio but with complete isolation and security from each separate network.\u003c\/p\u003e\n\u003cp\u003eAs each network is isolated, they can operate asynchronously and at different sample rates from each other without any problems. Each network can operate at sample rates from 44.1 kHz up to 192kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo Dante Interfaces\u003c\/strong\u003e\u003cbr\u003eThe Vittoria has two Dante network audio interfaces. Each interface has:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary connection using copper Ethernet via RJ45 EtherCON socket\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSecondary connection using copper Ethernet via RJ45 EtherCON socket\u003c\/li\u003e\n\u003cli\u003ePrimary fibre connection via SFP module slot\u003c\/li\u003e\n\u003cli\u003eSecondary fibre connection via SFP module slot\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe two network interfaces will typically be connected onto different networks and the Vittoria will ‘bridge’ between them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew Network interface options\u003c\/strong\u003e\u003cbr\u003eA Ravenna\/AES67 module is now also available allowing the Vittoria to include a Dante and a Ravenna module, for two isolated networks using different technologies but still passing audio.  Available configurations are:\u003cbr\u003e\u003cbr\u003eVittoria DD:  Dante to Dante\u003cbr\u003eVittoria DR:  Dante to Ravenna\u003cbr\u003eVittoria RR:  Ravenna to Ravenna\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIndependently Operated Networks\u003c\/strong\u003e\u003cbr\u003eAs each side of the Vittoria is independent and not connected across a network, they can have independent settings.\u003c\/p\u003e\n\u003cp\u003eFor example, if the Vittoria is in OB truck running its own network connection at 48kHz to sync with the other devices on board the truck, but needs to link with an external network in a local studio that is operating at 192kHz, then that is no problem for the Vittoria. It will bridge the two network settings and audio will flow!\u003c\/p\u003e\n\u003cp\u003eIf you have a work flow that includes AES67 and separate Dante networks, then the Vittoria can be used to bridge between them, with one network interface operating in Dante mode, and the other operating in AES67 mode.\u003c\/p\u003e\n\u003cp\u003eEach network on the Vittoria will operate between sample rates of 44.1-192kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e32 Channels\u003c\/strong\u003e\u003cbr\u003eThe Vittoria features a Dante Brooklyn II module in each interface and has 32 channels. Whatever you input on the primary interface is output on the secondary interface, and vice versa, up to 32 channels.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNetwork Compatibility\u003c\/strong\u003e\u003cbr\u003eAs well as Dante \u0026amp; AES67, the Vittoria is also SMPTE ST-2110-30 compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach Network Can Operate Asynchronously\u003c\/strong\u003e\u003cbr\u003eAlthough each network of the Vittoria is connected via Ethernet, they can be operated with different master clocks at different clock speeds. This could be useful if you needed to spread the number of devices on one network across two. This would be very useful when using a high number of Ultimo based devices, for example.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeparate Word Clock In\/Out\u003c\/strong\u003e\u003cbr\u003eEach network interface has a word clock input and a word clock output connection, available on full size BNC connectors. This allows connection of other devices for clock sync on each network separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVittoria As A Sample Rate Converter\u003c\/strong\u003e\u003cbr\u003eTypically each network interface of the Vittoria will operate on separate networks, however they can both be connected to the same network if you would like to use the Vittoria as a sample rate converter.\u003c\/p\u003e\n\u003cp\u003eIf the primary network is operating at 44.1kHz and you want to connect a device at 48kHz, just set the secondary interface to 48kHz and connect your new device to this interface in Dante Controller. The audio will now be available on the primary interface at 44.1kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRedundant Power Supplies\u003c\/strong\u003e\u003cbr\u003eThe Vittoria has two switch mode AC power supplies presented on rear panel IEC plugs.\u003c\/p\u003e\n\u003cp\u003eThese operate on a load sharing basis. This means that both supplies are running together at a low level. Statistically it is shown that running the supplies together offers greater life in the power supply than running one at full capacity with the other only taking over if it fails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides a firewall between two internal Dante or Ravenna network interfaces\u003c\/li\u003e\n\u003cli\u003eDante to Dante, Dante to Ravenna, or Ravenna to Ravenna\u003c\/li\u003e\n\u003cli\u003e32 input and output channels at sample rates up to 96kHz\u003c\/li\u003e\n\u003cli\u003e16 input and output channels at sample rates of 176.4 and 192kHz\u003c\/li\u003e\n\u003cli\u003eThe two networks can operate asynchronously or at different sample rates\u003c\/li\u003e\n\u003cli\u003eSupport for 44.1-192kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante (Ravenna as an option): Yes using Brooklyn II modules\u003c\/li\u003e\n\u003cli\u003eAES67 Compliant: Yes\u003c\/li\u003e\n\u003cli\u003eSMPTE ST-2110-30 Compliant: Yes, using Dante Domain Manager\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNumber Of Network Interfaces: 2 - Fully isolated\u003c\/li\u003e\n\u003cli\u003eCopper Ethernet: 4 x Neutrik EtherCON connectors\u003c\/li\u003e\n\u003cli\u003eFibre Ethernet: 4 x GBIC SFP slots to accept fibre modules (SFP modules not included)\u003c\/li\u003e\n\u003cli\u003eAudio Sampling Frequency: 44.1 to 192 kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransfer Rate: 1000 Mbps\u003c\/li\u003e\n\u003cli\u003eResolution: 24 bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNumber Of Inputs: 2\u003c\/li\u003e\n\u003cli\u003ePhysical Inputs: IEC plugs\u003c\/li\u003e\n\u003cli\u003eRedundancy: Yes with load sharing\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 100-240VAC +\/- 10%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency: 50-60Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption: 20 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eASYNCHRONOUS SAMPLE RATE CONVERTERS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Range: 139dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eI\/O Sample Rate: 44.1-192kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eI\/O Sample Rate Ratio: 1:8 to 7.75:1\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion Plus Noise: -120dB\u003c\/li\u003e\n\u003cli\u003eAll figures A weighted, 20Hz to 20kHz.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize: 450 x 310 x 50 mm (WxDxH)\u003c\/li\u003e\n\u003cli\u003eWeight: 3Kg\u003c\/li\u003e\n\u003cli\u003eMechanics: All aluminium construction, anodized and laser etched\u003c\/li\u003e\n\u003cli\u003eShipping Carton: Rugged export quality cardboard carton 620 x 410 x 130 mm (WxDxH)\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 4 Kg\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: 0 to +50 C (32° to 122 F)\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70 C (-4° to 158 F)\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 0 to 95% non-condensing\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook: Available by download\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable: 2 x 2 metre Cat5 RJ45plug \/RJ45plug cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106614665295,"sku":"VITTORIA DD","price":4985.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_f449309e-84da-4c51-94ae-c846f1466fc0.jpg?v=1776432291"},{"product_id":"glensound-vittoria-dr-dante-to-ravenna-network-bridge","title":"Glensound VITTORIA DR Dante To Ravenna Network Bridge","description":"\u003cp\u003eThe Vittoria provides a bridge between two internal and separate Dante networks. These networks are completely isolated from each other with 100% network security, providing a complete network firewall. Vittoria links 32 channels from each network directly in DSP, allowing the passing of bi-directional audio but with complete isolation and security from each separate network.\u003c\/p\u003e\n\u003cp\u003eAs each network is isolated, they can operate asynchronously and at different sample rates from each other without any problems. Each network can operate at sample rates from 44.1 kHz up to 192kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne Dante Interface One Ravenna inerface\u003c\/strong\u003e\u003cbr\u003eThe Vittoria has one Dante network audio interface and one Ravenna interface. Each interface has:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary connection using copper Ethernet via RJ45 EtherCON socket\u003c\/li\u003e\n\u003cli\u003eSecondary connection using copper Ethernet via RJ45 EtherCON socket\u003c\/li\u003e\n\u003cli\u003ePrimary fibre connection via SFP module slot\u003c\/li\u003e\n\u003cli\u003eSecondary fibre connection via SFP module slot\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe two network interfaces will typically be connected onto different networks and the Vittoria will ‘bridge’ between them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew Network interface options\u003c\/strong\u003e\u003cbr\u003eA Ravenna\/AES67 module is now also available allowing the Vittoria to include a Dante and a Ravenna module, for two isolated networks using different technologies but still passing audio.  Available configurations are:\u003cbr\u003e\u003cbr\u003eVittoria DD:  Dante to Dante\u003cbr\u003eVittoria DR:  Dante to Ravenna\u003cbr\u003eVittoria RR:  Ravenna to Ravenna\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIndependently Operated Networks\u003c\/strong\u003e\u003cbr\u003eAs each side of the Vittoria is independent and not connected across a network, they can have independent settings.\u003c\/p\u003e\n\u003cp\u003eFor example, if the Vittoria is in OB truck running its own network connection at 48kHz to sync with the other devices on board the truck, but needs to link with an external network in a local studio that is operating at 192kHz, then that is no problem for the Vittoria. It will bridge the two network settings and audio will flow!\u003c\/p\u003e\n\u003cp\u003eIf you have a work flow that includes AES67 and separate Dante networks, then the Vittoria can be used to bridge between them, with one network interface operating in Dante mode, and the other operating in AES67 mode.\u003c\/p\u003e\n\u003cp\u003eEach network on the Vittoria will operate between sample rates of 44.1-192kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e32 Channels\u003c\/strong\u003e\u003cbr\u003eThe Vittoria features a Dante Brooklyn II module in each interface and has 32 channels. Whatever you input on the primary interface is output on the secondary interface, and vice versa, up to 32 channels.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNetwork Compatibility\u003c\/strong\u003e\u003cbr\u003eAs well as Dante \u0026amp; AES67, the Vittoria is also SMPTE ST-2110-30 compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach Network Can Operate Asynchronously\u003c\/strong\u003e\u003cbr\u003eAlthough each network of the Vittoria is connected via Ethernet, they can be operated with different master clocks at different clock speeds. This could be useful if you needed to spread the number of devices on one network across two. This would be very useful when using a high number of Ultimo based devices, for example.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeparate Word Clock In\/Out\u003c\/strong\u003e\u003cbr\u003eEach network interface has a word clock input and a word clock output connection, available on full size BNC connectors. This allows connection of other devices for clock sync on each network separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVittoria As A Sample Rate Converter\u003c\/strong\u003e\u003cbr\u003eTypically each network interface of the Vittoria will operate on separate networks, however they can both be connected to the same network if you would like to use the Vittoria as a sample rate converter.\u003c\/p\u003e\n\u003cp\u003eIf the primary network is operating at 44.1kHz and you want to connect a device at 48kHz, just set the secondary interface to 48kHz and connect your new device to this interface in Dante Controller. The audio will now be available on the primary interface at 44.1kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRedundant Power Supplies\u003c\/strong\u003e\u003cbr\u003eThe Vittoria has two switch mode AC power supplies presented on rear panel IEC plugs.\u003c\/p\u003e\n\u003cp\u003eThese operate on a load sharing basis. This means that both supplies are running together at a low level. Statistically it is shown that running the supplies together offers greater life in the power supply than running one at full capacity with the other only taking over if it fails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides a firewall between two internal Dante or Ravenna network interfaces\u003c\/li\u003e\n\u003cli\u003eDante to Dante, Dante to Ravenna, or Ravenna to Ravenna\u003c\/li\u003e\n\u003cli\u003e32 input and output channels at sample rates up to 96kHz\u003c\/li\u003e\n\u003cli\u003e16 input and output channels at sample rates of 176.4 and 192kHz\u003c\/li\u003e\n\u003cli\u003eThe two networks can operate asynchronously or at different sample rates\u003c\/li\u003e\n\u003cli\u003eSupport for 44.1-192kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante (Ravenna as an option): Yes using Brooklyn III modules\u003c\/li\u003e\n\u003cli\u003eAES67 Compliant: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSMPTE ST-2110-30 Compliant\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDane module: Yes, using Dante Domain Manager\u003c\/li\u003e\n\u003cli\u003eRavenna module: Yes\u003c\/li\u003e\n\u003cli\u003eNumber Of Network Interfaces: 2 - Fully isolated\u003c\/li\u003e\n\u003cli\u003eCopper Ethernet: 4 x Neutrik EtherCON connectors\u003c\/li\u003e\n\u003cli\u003eFibre Ethernet: 4 x GBIC SFP slots to accept fibre modules (SFP modules not included)\u003c\/li\u003e\n\u003cli\u003eAudio Sampling Frequency: 44.1 to 192 kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransfer Rate: 1000 Mbps\u003c\/li\u003e\n\u003cli\u003eResolution: 24 bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNumber Of Inputs: 2\u003c\/li\u003e\n\u003cli\u003ePhysical Inputs: IEC plugs\u003c\/li\u003e\n\u003cli\u003eRedundancy: Yes with load sharing\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 100-240VAC +\/- 10%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency: 50-60Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption: 20 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eASYNCHRONOUS SAMPLE RATE CONVERTERS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Range: 139dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eI\/O Sample Rate: 44.1-192kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eI\/O Sample Rate Ratio: 1:8 to 7.75:1\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion Plus Noise: -120dB\u003c\/li\u003e\n\u003cli\u003eAll figures A weighted, 20Hz to 20kHz.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize: 450 x 310 x 50 mm (WxDxH)\u003c\/li\u003e\n\u003cli\u003eWeight: 3Kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMechanics: All aluminium construction, anodized and laser etched\u003c\/li\u003e\n\u003cli\u003eShipping Carton: Rugged export quality cardboard carton 620 x 410 x 130 mm (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 4 Kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: 0 to +40 C (32° to 104 F)\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70 C (-4° to 158 F)\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 0 to 95% non-condensing\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook: Available by download\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable: 2 x 2 metre Cat5 RJ45plug \/RJ45plug cable\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106630754383,"sku":"VITTORIA DR","price":5182.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_6ef04534-bea6-4985-9d05-732d9ac9ea5b.jpg?v=1776433551"},{"product_id":"glensound-vittoria-rr-ravenna-network-audio-bridge","title":"Glensound VITTORIA RR Ravenna Network Audio Bridge","description":"\u003cp\u003e\u003cspan\u003eRavenna network audio bridge. 32 x 32 channels across two completely isolated Ravenna networks.\u003c\/span\u003e\u003c\/p\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106650677327,"sku":"VITTORIA RR","price":5378.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/vittoria_rr_frontview_1.webp?v=1776434265"},{"product_id":"glensound-vittoria-64-dd-64-channel-dante-to-dante-network-bridge","title":"Glensound VITTORIA 64\/DD 64 Channel Dante To Dante Network Bridge","description":"\u003cp\u003eThe Vittoria provides a bridge between two internal and separate Dante networks. These networks are completely isolated from each other with 100% network security, providing a complete network firewall. Vittoria links 64 channels from each network directly in DSP, allowing the passing of bi-directional audio but with complete isolation and security from each separate network.\u003c\/p\u003e\n\u003cp\u003eAs each network is isolated, they can operate asynchronously and at different sample rates from each other without any problems. Each network can operate at sample rates from 44.1 kHz up to 96kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo Dante Interfaces\u003c\/strong\u003e\u003cbr\u003eThe Vittoria has two Dante network audio interfaces. Each interface has:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary connection using copper Ethernet via RJ45 EtherCON socket\u003c\/li\u003e\n\u003cli\u003eSecondary connection using copper Ethernet via RJ45 EtherCON socket\u003c\/li\u003e\n\u003cli\u003ePrimary fibre connection via SFP module slot\u003c\/li\u003e\n\u003cli\u003eSecondary fibre connection via SFP module slot\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe two network interfaces will typically be connected onto different networks and the Vittoria will ‘bridge’ between them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew Network interface options\u003c\/strong\u003e\u003cbr\u003eA Ravenna\/AES67 module is now also available allowing the Vittoria to include a Dante and a Ravenna module, for two isolated networks using different technologies but still passing audio.  Available configurations are:\u003cbr\u003e\u003cbr\u003eVittoria 64 DD:  Dante to Dante\u003cbr\u003eVittoria 64 DR:  Dante to Ravenna\u003cbr\u003eVittoria 64 RR:  Ravenna to Ravenna\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIndependently Operated Networks\u003c\/strong\u003e\u003cbr\u003eAs each side of the Vittoria is independent and not connected across a network, they can have independent settings.\u003c\/p\u003e\n\u003cp\u003eFor example, if the Vittoria is in OB truck running its own network connection at 48kHz to sync with the other devices on board the truck, but needs to link with an external network in a local studio that is operating at 44.1kHz, then that is no problem for the Vittoria. It will bridge the two network settings and audio will flow!\u003c\/p\u003e\n\u003cp\u003eIf you have a work flow that includes AES67 and separate Dante networks, then the Vittoria can be used to bridge between them, with one network interface operating in Dante mode, and the other operating in AES67 mode.\u003c\/p\u003e\n\u003cp\u003eEach network on the Vittoria will operate between sample rates of 44.1-96kHz.\u003c\/p\u003e\n\u003cp\u003e64 Channels\u003cbr\u003eThe Vittoria features a Dante Brooklyn III module in each interface and has 64 channels. Whatever you input on the primary interface is output on the secondary interface, and vice versa, up to 64 channels.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNetwork Compatibility\u003c\/strong\u003e\u003cbr\u003eAs well as Dante \u0026amp; AES67, the Vittoria is also SMPTE ST-2110-30 compatible using DDM.\u003c\/p\u003e\n\u003cp\u003eEach Network Can Operate Asynchronously\u003cbr\u003eAlthough each network of the Vittoria is connected via Ethernet, they can be operated with different master clocks at different clock speeds. This could be useful if you needed to spread the number of devices on one network across two. This would be very useful when using a high number of Ultimo based devices, for example.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeparate Word Clock In\/Out\u003c\/strong\u003e\u003cbr\u003eEach network interface has a word clock input and a word clock output connection, available on full size BNC connectors. This allows connection of other devices for clock sync on each network separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVittoria As A Sample Rate Converter\u003c\/strong\u003e\u003cbr\u003eTypically each network interface of the Vittoria will operate on separate networks, however they can both be connected to the same network if you would like to use the Vittoria as a sample rate converter.\u003c\/p\u003e\n\u003cp\u003eIf the primary network is operating at 44.1kHz and you want to connect a device at 48kHz, just set the secondary interface to 48kHz and connect your new device to this interface in Dante Controller. The audio will now be available on the primary interface at 44.1kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRedundant Power Supplies\u003c\/strong\u003e\u003cbr\u003eThe Vittoria has two switch mode AC power supplies presented on rear panel IEC plugs.\u003c\/p\u003e\n\u003cp\u003eThese operate on a load sharing basis. This means that both supplies are running together at a low level. Statistically it is shown that running the supplies together offers greater life in the power supply than running one at full capacity with the other only taking over if it fails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides a firewall between two Dante network interfaces\u003c\/li\u003e\n\u003cli\u003e64 input and output channels at sample rates up to 48kHz\u003c\/li\u003e\n\u003cli\u003e32 input and output channels at sample rates up to 96kHz\u003c\/li\u003e\n\u003cli\u003eThe two networks can operate asynchronously or at different sample rates\u003c\/li\u003e\n\u003cli\u003eSupport for 44.1-96kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante (Ravenna as an option): Yes using Brooklyn III modules\u003c\/li\u003e\n\u003cli\u003eAES67 Compliant: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSMPTE ST-2110-30 Compliant\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYes, using Dante Domain Manager\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNumber Of Network Interfaces: 2 - Fully isolated\u003c\/li\u003e\n\u003cli\u003eCopper Ethernet: 4 x Neutrik EtherCON connectors\u003c\/li\u003e\n\u003cli\u003eFibre Ethernet: 4 x GBIC SFP slots to accept fibre modules (SFP modules not included)\u003c\/li\u003e\n\u003cli\u003eAudio Sampling Frequency: 44.1 to 96 kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransfer Rate: 1000 Mbps\u003c\/li\u003e\n\u003cli\u003eResolution: 24 bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNumber Of Inputs: 2\u003c\/li\u003e\n\u003cli\u003ePhysical Inputs: IEC plugs\u003c\/li\u003e\n\u003cli\u003eRedundancy: Yes with load sharing\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 100-240VAC +\/- 10%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency: 50-60Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption: 20 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eASYNCHRONOUS SAMPLE RATE CONVERTERS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Range: 139dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eI\/O Sample Rate: 44.1-96kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eI\/O Sample Rate Ratio: 1:8 to 7.75:1\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion Plus Noise: -120dB\u003c\/li\u003e\n\u003cli\u003eAll figures A weighted, 20Hz to 20kHz.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 450 x 310 x 50 mm (WxDxH)\u003c\/li\u003e\n\u003cli\u003eWeight: 3Kg\u003c\/li\u003e\n\u003cli\u003eMechanics: All aluminium construction, anodized and laser etched\u003c\/li\u003e\n\u003cli\u003eShipping Carton: Rugged export quality cardboard carton 620 x 410 x 130 mm (WxDxH)\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 4 Kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: 0 to +50 C (32° to 122 F)\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70 C (-4° to 158 F)\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 0 to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook: Available by download\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable: 2 x 2 metre Cat5 RJ45plug \/RJ45plug cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106668666959,"sku":"VITTORIA 64\/DD","price":6120.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_08dd89b7-bb83-4fe0-84b9-622afe79b696.jpg?v=1776435505"},{"product_id":"glensound-vittoria-64-dr-64-channel-dante-ravenna-network-bridge","title":"Glensound VITTORIA 64\/DR 64 Channel Dante \/ Ravenna Network Bridge","description":"\u003cp\u003eThe Vittoria provides a bridge between two internal and separate Dante and  Ravenna networks. These networks are completely isolated from each other with 100% network security, providing a complete network firewall. Vittoria links 64 channels from each network directly in DSP, allowing the passing of bi-directional audio but with complete isolation and security from each separate network.\u003c\/p\u003e\n\u003cp\u003eAs each network is isolated, they can operate asynchronously and at different sample rates from each other without any problems. Each network can operate at sample rates from 44.1 kHz up to 96kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDante\/Ravenna Interfaces\u003c\/strong\u003e\u003cbr\u003eThe Vittoria has 1 Dante network and 1 Ravenna network interface. Each interface has:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary connection using copper Ethernet via RJ45 EtherCON socket\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSecondary connection using copper Ethernet via RJ45 EtherCON socket\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrimary fibre connection via SFP module slot\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSecondary fibre connection via SFP module slot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe two network interfaces will typically be connected onto different networks and the Vittoria will ‘bridge’ between them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew Network interface options\u003c\/strong\u003e\u003cbr\u003eA Ravenna\/AES67 module is now also available allowing the Vittoria to include a Dante and a Ravenna module, for two isolated networks using different technologies but still passing audio.  Available configurations are:\u003cbr\u003e\u003cbr\u003eVittoria 64 DD:  Dante to Dante\u003cbr\u003eVittoria 64 DR:  Dante to Ravenna\u003cbr\u003eVittoria 64 RR:  Ravenna to Ravenna\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIndependently Operated Networks\u003c\/strong\u003e\u003cbr\u003eAs each side of the Vittoria is independent and not connected across a network, they can have independent settings.\u003c\/p\u003e\n\u003cp\u003eFor example, if the Vittoria is in OB truck running its own Dante network connection at 48kHz to sync with the other devices on board the truck, but needs to link with an external network in a local studio that is operating at 44.1kHz on Ravenna, then that is no problem for the Vittoria. It will bridge the two network settings and audio will flow!\u003c\/p\u003e\n\u003cp\u003eIf you have a work flow that includes AES67 and separate Dante networks, then the Vittoria can be used to bridge between them, with one network interface operating in Dante mode, and the other operating in AES67 mode.\u003c\/p\u003e\n\u003cp\u003eEach network on the Vittoria will operate between sample rates of 44.1-96kHz.\u003c\/p\u003e\n\u003cp\u003e64 Channels\u003cbr\u003eThe Vittoria features a Dante Brooklyn III module and a separate Ravenna\/AES67 module that pass 64 channels of bi-directional audio between each other. Whatever you input on the first module is output on the second module, and vice versa, up to 64 channels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Compatibility\u003c\/strong\u003e\u003cbr\u003eAs well as Dante \u0026amp; AES67, the Vittoria is also full SMPTE ST-2110-30 compliant on the Ravenna\/AES67 module without further software or licensing required..\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach Network Can Operate Asynchronously\u003c\/strong\u003e\u003cbr\u003eAlthough each network of the Vittoria is connected via Ethernet, they can be operated with different master clocks at different clock speeds. This could be useful if you needed to spread the number of devices on one network across two. This would be very useful when using a high number of Ultimo based devices, for example.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWord Clock In\/Out\u003c\/strong\u003e\u003cbr\u003eThe Dante network interface has a word clock input and a word clock output connection, available on full size BNC connectors. This allows connection of other devices for clock sync on Dante.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRedundant Power Supplies\u003cbr\u003e\u003c\/strong\u003eThe Vittoria has two switch mode AC power supplies presented on rear panel IEC plugs.\u003c\/p\u003e\n\u003cp\u003eThese operate on a load sharing basis. This means that both supplies are running together at a low level. Statistically it is shown that running the supplies together offers greater life in the power supply than running one at full capacity with the other only taking over if it fails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides a firewall between a Dante \u0026amp; Ravenna network interface\u003c\/li\u003e\n\u003cli\u003eActs as a bridge bi-directionally with Dante and AES67\/Ravenna Networks\u003c\/li\u003e\n\u003cli\u003eActs as an interface between Dante and full SMPTE ST2110-30\u003c\/li\u003e\n\u003cli\u003e64 input and output channels at sample rates up to 48kHz\u003c\/li\u003e\n\u003cli\u003e32 input and output channels at sample rates up to 96kHz\u003c\/li\u003e\n\u003cli\u003eThe two networks can operate asynchronously or at different sample rates\u003c\/li\u003e\n\u003cli\u003eSupport for 44.1-96kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante - Using Brooklyn III: AES67 - Using Ravenna\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67 Compliant: Yes without further hardware or software needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSMPTE ST-2110-30 Compliant\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYes.  Full SMPTD ST2110 is available on the Ravenna\/AES67 module\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNumber Of Network Interfaces: 2 - Fully isolated\u003c\/li\u003e\n\u003cli\u003eCopper Ethernet: 4 x Neutrik EtherCON connectors\u003c\/li\u003e\n\u003cli\u003eFibre Ethernet: 4 x GBIC SFP slots to accept fibre modules (SFP modules not included)\u003c\/li\u003e\n\u003cli\u003eAudio Sampling Frequency: 44.1 to 96 kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransfer Rate: 1000 Mbps\u003c\/li\u003e\n\u003cli\u003eResolution: 24 bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNumber Of Inputs: 2\u003c\/li\u003e\n\u003cli\u003ePhysical Inputs: IEC plugs\u003c\/li\u003e\n\u003cli\u003eRedundancy: Yes with load sharing\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 100-240VAC +\/- 10%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency: 50-60Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption: 20 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eASYNCHRONOUS SAMPLE RATE CONVERTERS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Range: 139dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eI\/O Sample Rate: 44.1-96kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eI\/O Sample Rate Ratio: 1:8 to 7.75:1\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion Plus Noise: -120dB\u003c\/li\u003e\n\u003cli\u003eAll figures A weighted, 20Hz to 20kHz.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 450 x 310 x 50 mm (WxDxH)\u003c\/li\u003e\n\u003cli\u003eWeight: 3Kg\u003c\/li\u003e\n\u003cli\u003eMechanics: All aluminium construction, anodized and laser etched\u003c\/li\u003e\n\u003cli\u003eShipping Carton: Rugged export quality cardboard carton 620 x 410 x 130 mm (WxDxH)\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 4 Kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: 0 to +50 C (32° to 122 F)\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70 C (-4° to 158 F)\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 0 to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook: Available by download\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable: 2 x 2 metre Cat5 RJ45plug \/RJ45plug cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106679316559,"sku":"VITTORIA 64\/DR","price":6315.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_2c57b755-88d9-4e52-ad42-e151a3d2e9d6.jpg?v=1776436056"},{"product_id":"glensound-vittoria-64-rr-64-channel-ravenna-ravenna-network-bridge","title":"Glensound VITTORIA 64\/RR 64 Channel Ravenna \/ Ravenna Network Bridge","description":"\u003cp\u003eThe Vittoria provides a bridge between two internal and separate Ravenna networks. These networks are completely isolated from each other with 100% network security, providing a complete network firewall. Vittoria links 64 channels from each network directly in DSP, allowing the passing of bi-directional audio but with complete isolation and security from each separate network.\u003c\/p\u003e\n\u003cp\u003eAs each network is isolated, they can operate asynchronously and at different sample rates from each other without any problems. Each network can operate at sample rates from 44.1 kHz up to 96kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAES67\/Ravenna Interfaces\u003c\/strong\u003e\u003cbr\u003eThe Vittoria 64 RR has 2 Ravenna network interface. Each interface has:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary connection using copper Ethernet via RJ45 EtherCON socket\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSecondary connection using copper Ethernet via RJ45 EtherCON socket\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrimary fibre connection via SFP module slot\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSecondary fibre connection via SFP module slot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe two network interfaces will typically be connected onto different networks and the Vittoria will ‘bridge’ between them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew Network interface options\u003c\/strong\u003e\u003cbr\u003eVittoria 64 DD:  Dante to Dante\u003cbr\u003eVittoria 64 DR:  Dante to Ravenna\u003cbr\u003eVittoria 64 RR:  Ravenna to Ravenna\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIndependently Operated Networks\u003c\/strong\u003e\u003cbr\u003eAs each side of the Vittoria is independent and not connected across a network, they can have independent settings.\u003c\/p\u003e\n\u003cp\u003eFor example, if the Vittoria is in OB truck running its own Ravenna network connection at 48kHz to sync with the other devices on board the truck, but needs to link with an external network in a local studio that is operating at 44.1kHz on Ravenna, then that is no problem for the Vittoria. It will bridge the two network settings and audio will flow!\u003c\/p\u003e\n\u003cp\u003eEach network on the Vittoria will operate between sample rates of 44.1-96kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e64 Channels\u003c\/strong\u003e\u003cbr\u003eThe Vittoria features two Ravenna\/AES67 module that pass 64 channels of bi-directional audio between each other. Whatever you input on the first module is output on the second module, and vice versa, up to 64 channels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Compatibility\u003c\/strong\u003e\u003cbr\u003eThe Vittoria is also full SMPTE ST-2110-30 compliant without further software or licensing required..\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach Network Can Operate Asynchronously\u003c\/strong\u003e\u003cbr\u003eAlthough each network of the Vittoria is connected via Ethernet, they can be operated with different master clocks at different clock speeds. This could be useful if you needed to spread the number of devices on one network across two. This would be very useful when using a high number of Ultimo based devices, for example.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRedundant Power Supplies\u003cbr\u003e\u003c\/strong\u003eThe Vittoria has two switch mode AC power supplies presented on rear panel IEC plugs.\u003c\/p\u003e\n\u003cp\u003eThese operate on a load sharing basis. This means that both supplies are running together at a low level. Statistically it is shown that running the supplies together offers greater life in the power supply than running one at full capacity with the other only taking over if it fails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides a firewall between 2 Ravenna network interfaces\u003c\/li\u003e\n\u003cli\u003eActs as an isolation bridge bi-directionally with two separate AES67\/Ravenna Networks\u003c\/li\u003e\n\u003cli\u003eActs as an interface for full SMPTE ST2110-30\u003c\/li\u003e\n\u003cli\u003e64 input and output channels at sample rates up to 48kHz\u003c\/li\u003e\n\u003cli\u003e32 input and output channels at sample rates up to 96kHz\u003c\/li\u003e\n\u003cli\u003eThe two networks can operate asynchronously or at different sample rates\u003c\/li\u003e\n\u003cli\u003eSupport for 44.1-96kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAES67 - Using Ravenna\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67 Compliant: Yes without further hardware or software needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSMPTE ST-2110-30 Compliant\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYes.  Full SMPTE ST2110 is available\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNumber Of Network Interfaces: 2 - Fully isolated\u003c\/li\u003e\n\u003cli\u003eCopper Ethernet: 4 x Neutrik EtherCON connectors\u003c\/li\u003e\n\u003cli\u003eFibre Ethernet: 4 x GBIC SFP slots to accept fibre modules (SFP modules not included)\u003c\/li\u003e\n\u003cli\u003eAudio Sampling Frequency: 44.1 to 96 kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransfer Rate: 1000 Mbps\u003c\/li\u003e\n\u003cli\u003eResolution: 24 bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNumber Of Inputs: 2\u003c\/li\u003e\n\u003cli\u003ePhysical Inputs: IEC plugs\u003c\/li\u003e\n\u003cli\u003eRedundancy: Yes with load sharing\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 100-240VAC +\/- 10%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency: 50-60Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption: 20 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eASYNCHRONOUS SAMPLE RATE CONVERTERS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Range: 139dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eI\/O Sample Rate: 44.1-96kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eI\/O Sample Rate Ratio: 1:8 to 7.75:1\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion Plus Noise: -120dB\u003c\/li\u003e\n\u003cli\u003eAll figures A weighted, 20Hz to 20kHz.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 450 x 310 x 50 mm (WxDxH)\u003c\/li\u003e\n\u003cli\u003eWeight: 3Kg\u003c\/li\u003e\n\u003cli\u003eMechanics: All aluminium construction, anodized and laser etched\u003c\/li\u003e\n\u003cli\u003eShipping Carton: Rugged export quality cardboard carton 620 x 410 x 130 mm (WxDxH)\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 4 Kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: 0 to +50 C (32° to 122 F)\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70 C (-4° to 158 F)\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 0 to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook: Available by download\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable: 2 x 2 metre Cat5 RJ45plug \/RJ45plug cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106712903759,"sku":"VITTORIA 64\/RR","price":6510.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_ecda86c9-eddd-4264-ad83-6f8952003bf1.jpg?v=1776436835"},{"product_id":"glensound-spark-sub-compact-single-user-commentary","title":"Glensound SPARK Sub Compact Single User Commentary","description":"\u003cp\u003eThe Spark is the most technically proficient commentary or announcers interface available, from such a small design.  For applications where desk space is at a premium, but quality and features are still paramount, Glensound proudly introduce the Spark.\u003cbr\u003e\u003cbr\u003eSpark  - With single programme monitor input, and one master output\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGlensound Grade Mic Amp\u003c\/strong\u003e\u003cbr\u003eThe Spark includes the highly regarded Glensound Grade mic amp system.  This results in a clean audio input without distortion or clipping, that can be taken live to air with confidence and without any further processing.  The mic input is on the rear panel via a 3 pin XLR socket.  A small pot adjusts the gain level and there is a switch for 48v phantom power.  Mic gain, phantom power and the compressor can also be set via the GlenController remote software.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGlensound Referee Compressor\/Limiter System\u003c\/strong\u003e\u003cbr\u003eGlensound has been fine tuning the way input signals are managed for decades.  Glensound boxes are used in live news and sport environments, where the announcer can get immediately over enthusiastic, and be screaming down the microphone.  Glensound manage this input in two ways.  One by giving the input a high headroom to prevent clipping in the first place, then by using a specially configured compressor\/limiter system.  This system does not affect the general dynamics of the audio, so there is no lifting of levels.  It only becomes active as the signal reaches peaks and approaches clipping.  Then a gentle compression is added that, in a unifron mannar, becomes harder and harder as the signal approaches clip.  The result is a background system, that has no affect on the general dynamics of the input, but prevents it from clipping.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphones\u003c\/strong\u003e\u003cbr\u003eThe rear panel has a 6.35mm jack socket for connecting headphones from 32-1000 ohms.  The Spark features Glensound's automatic impedance matching system.  This means the relative headphone pot level will be consistent regardless of the impedance of the headphones used (as long as they are between 32-1000 ohms).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003ePower is supplied on the network connection via an Neutrik EtherCON locking RJ45 connector.  The SPARK must be connected to a PoE network switch for power, or by using a midspan PoE injector.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTalk Buttons\u003c\/strong\u003e\u003cbr\u003eFor clarity, the Spark uses a large and bright LED buttons for mic on.  This can be configured via GlenController remote software, and can be set in the following way:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways on\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlways off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlways on but muted when pressed (cough button)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLatching on\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMomentary push to talk\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligent (momentary and latching)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphone Mixer\u003c\/strong\u003e\u003cbr\u003eThe front panel has a small monitoring pot that is routed to the headphones from the inputs on the Dante network.  This is a sprung pot that is kept flush with the panel when not in use.  Pressing it in slightly allows it to spring out to make adjustments, and then return to the flush position.  This method allowed the functionality of pots for the monitoring input, but also allowed us to keep the overall dimensions of the Spark to a minimum. \u003cbr\u003e\u003cbr\u003eUsing the GlenController remote, a total of 4 inputs can be adjusted directly (with only one adjustable directly on the unit) and each input can be set to a separate pan position.  The pot can also be set to cut at the full anti clockwise position, or just to a dim level so that the user cannot turn the monitoring input all the way off.  These features are also present on the further auxiliary and background monitoring inputs. There are 4 further inputs to the headphone monitoring that can be adjusted on Glencontroller only:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSidetone to adjust the users own voice level in their headphones\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAux 1 - Mono input direct to headphones controlled only in GlenController (Aux 1\u0026amp;2 controlled together)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAux 2 - Mono input direct to headphones controlled only in GlenController (Aux 1\u0026amp;2 controlled together)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBkg - Stereo input direct to headphones controlled only in GlenController.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRouting Table\u003cbr\u003e\u003c\/strong\u003eThe Spark features 8 inputs and 8 outputs across the Dante network, but it only directly needs 4 inputs and outputs.  This means that we have 4 inputs and 4 outputs on the network available for further use.  Below we show how we utilise the I\/O resource of the Spark to maximise its flexibility for various applications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic\/Line Input - This is the main mic\/line input and can be switched to:\u003c\/li\u003e\n\u003cli\u003eThe Main programme output on Dante out 1, via the top panel switch             \u003c\/li\u003e\n\u003cli\u003eTalkback output 1 via Dante out 5, via GlenController only\u003c\/li\u003e\n\u003cli\u003eTalkback output 2 via Dante out 6, via GlenController only\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTalkback output 3 via Dante out 7, via GlenController only\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePermanent live output on Dante out 2\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIt is also mixed via a top panel control into a two channel headphone output as sidetone monitoring. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDante Inputs\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCue input 1 via Dante in 1, is sent to the headphones via a top panel mix pot\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCue input 2 via Dante in 2, is sent to the headphones via GlenController only\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCue input 3 via Dante in 3, is sent to the headphones via GlenController only\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCue input 4 via Dante in 4, is sent to the headphones via GlenController only\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFurther Outputs\u003c\/strong\u003e\u003cbr\u003eDante out 3 and 4 - These outputs are in parallel to what is sent to the users headphones, making the 2 channel headphone mix available on the network\u003cbr\u003eDante out 8 - This is a 1kHz tone for assisting with line up\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSystem Control\u003c\/strong\u003e\u003cbr\u003eThe following settings on the Spark are configurable on the unit directly:\u003c\/li\u003e\n\u003cli\u003eMaster headphone volume\/panning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic sidetone volume\/panning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncoming call chime volume\u003cbr\u003e\u003cbr\u003eUsing the blue side panel buttons enables configuration mode directly on the Spark.\u003cbr\u003e\u003cbr\u003eUsing the Windows 11 app GlenController enables full remote configuration and monitoring and enables the following control:\u003c\/li\u003e\n\u003cli\u003eTalk button config options\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic input gain\/pan\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhantom on\/off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompressor on\/off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePot\/switch lock\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone levels volume\/pan\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic sidetone volume\/pan\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone monitoring pot range\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncoming call chime volume\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePPM meter per input\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMulti Channel Sync With Your Computer Application\u003c\/strong\u003e\u003cbr\u003eThe Spark can easily connect with a PC or Mac and exchange bi-directional multi channel audio.  To do this use the Dante Virtual Sound Card (VSC).  This is very low cost and available directly from the Audinate web site at\u003cspan\u003e \u003c\/span\u003ewww.audinate.com.  The Sparks I\/O can then interface with any application running on a PC or Mac by simply selecting Dante VSC as its sound device.\u003cbr\u003e\u003cbr\u003eThis has been very popular when using browser based multi channel intercom and IP solutions.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLatest Dante Broadway Design\u003c\/strong\u003e\u003cbr\u003eThis Broadway Design can receive audio from multiple network connections, and allows a higher number of Dante inputs and outputs across the network.  The design on the Spark actually presents itself on Dante Controller with 8 inputs, and 8 outputs (see routing table for further info)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle user commentary using Dante Broadway module\u003c\/li\u003e\n\u003cli\u003eFull remote control and monitoring using Windows 11 app GlenController\u003c\/li\u003e\n\u003cli\u003eSub compact desktop design\u003c\/li\u003e\n\u003cli\u003eAdditional Dante functionality with 8 x inputs \u0026amp; 8 x outputs on Dante Controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic preamp\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e-70dBu to -7dBu input range for -18dBFS lineup\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e47dB adjustable gain range\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eImpedeance 2k4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFreq response\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+\/- 0.01dBu 22Hz to 22kHz.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e-1.5dB roll off at 20Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Q notch filter at 20kHz\u003c\/li\u003e\n\u003cli\u003eEIN 126dB 22Hz to 22kHz\u003c\/li\u003e\n\u003cli\u003eTHD at 0dBu output (-54in (dynamic), 39db gain to lineup at -18dBFS)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.074% @ 100Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.069% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.061% @ 10kHz\u003c\/li\u003e\n\u003cli\u003eTHD at 0dBu output (-38in (condenser), 22db gain to lineup at -18dBFS)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.011% @ 100Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.011% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.009% @ 10kHz\u003c\/li\u003e\n\u003cli\u003ePhantom power = +48V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeadphone output\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImpedeance 32-1000 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax output level +18dBu into 600 Ohms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFreq response\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+\/- 0.01dBu 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e-0.5dBu roll off 100Hz to 22Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e-0.5dBu roll off 12kHz to 22kHz\u003c\/li\u003e\n\u003cli\u003eDistortion 0.01% @ lineup output level\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNoise -83dBu @ line up\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSample rate 44.1kHz and 48kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 0.4 kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWidth 8cm  Depth 12.5cm  Height 8cm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106751897679,"sku":"SPARK","price":2029.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_092a8bd4-62db-4d3b-bdfe-766ae89d1b31.jpg?v=1776437666"},{"product_id":"glensound-spark-1-sub-compact-single-user-commentary-with-1-talkback-channel","title":"Glensound SPARK 1 Sub Compact Single User Commentary With 1 Talkback Channel","description":"\u003cp\u003eThe Spark is the most technically proficient commentary or announcers interface available, from such a small design.  For applications where desk space is at a premium, but quality and features are still paramount, Glensound proudly introduce the Spark.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark 1 - With 1 talkback channel and monior\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGlensound Grade Mic Amp\u003c\/strong\u003e\u003cbr\u003eThe Spark includes the highly regarded Glensound Grade mic amp system.  This results in a clean audio input without distortion or clipping, that can be taken live to air with confidence and without any further processing.  The mic input is on the rear panel via a 3 pin XLR socket.  A small pot adjusts the gain level and there is a switch for 48v phantom power.  Mic gain, phantom power and the compressor can also be set via the GlenController remote software.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGlensound Referee Compressor\/Limiter System\u003c\/strong\u003e\u003cbr\u003eGlensound has been fine tuning the way input signals are managed for decades.  Glensound boxes are used in live news and sport environments, where the announcer can get immediately over enthusiastic, and be screaming down the microphone.  Glensound manage this input in two ways.  One by giving the input a high headroom to prevent clipping in the first place, then by using a specially configured compressor\/limiter system.  This system does not affect the general dynamics of the audio, so there is no lifting of levels.  It only becomes active as the signal reaches peaks and approaches clipping.  Then a gentle compression is added that, in a unifron mannar, becomes harder and harder as the signal approaches clip.  The result is a background system, that has no affect on the general dynamics of the input, but prevents it from clipping.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphones\u003c\/strong\u003e\u003cbr\u003eThe rear panel has a 6.35mm jack socket for connecting headphones from 32-1000 ohms.  The Spark features Glensound's automatic impedance matching system.  This means the relative headphone pot level will be consistent regardless of the impedance of the headphones used (as long as they are between 32-1000 ohms).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003ePower is supplied on the network connection via an Neutrik EtherCON locking RJ45 connector.  The SPARK must be connected to a PoE network switch for power, or by using a midspan PoE injector.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTalk Buttons\u003c\/strong\u003e\u003cbr\u003eFor clarity, the Spark uses large and bright LED buttons for mic on  and talkback.  These can be configured via GlenController remote software, and can be set in the following way:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways on\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlways off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlways on but muted when pressed (cough button)\u003c\/li\u003e\n\u003cli\u003eLatching on\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMomentary push to talk\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligent (momentary and latching)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInteraction can also be set for the talkback button, to set if the activation of this button should mute the main programme mic.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphone Mixer\u003c\/strong\u003e\u003cbr\u003eThe front panel has a small monitoring pots that are routed to the headphones from the inputs on the Dante network.  These are sprung pots that are kept flush with the panel when not in use.  Pressing them in slightly allows them to spring out to make adjustments, and then return to the flush position.  This method allowed the functionality of pots for the monitoring input, but also allowed us to keep the overall dimensions of the Spark to a minimum. \u003cbr\u003e\u003cbr\u003eUsing the GlenController remote, a total of 4 inputs can be adjusted directly (with only two adjustable directly on the unit) and each input can be set to a separate pan position.  The pots can also be set to cut at the full anti clockwise position, or just to a dim level so that the user cannot turn the monitoring input all the way off.  These features are also present on the further auxiliary and background monitoring inputs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere are 4 further inputs to the headphone monitoring that can be adjusted on Glencontroller only:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSidetone to adjust the users own voice level in their headphones\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAux 1 - Mono input direct to headphones controlled only in GlenController (Aux 1\u0026amp;2 controlled together)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAux 2 - Mono input direct to headphones controlled only in GlenController (Aux 1\u0026amp;2 controlled together)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBkg - Stereo input direct to headphones controlled only in GlenController.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRouting Table\u003c\/strong\u003e\u003cbr\u003eThe Spark features 8 inputs and 8 outputs across the Dante network, but it only directly needs 4 inputs and outputs.  This means that we have 4 inputs and 4 outputs on the network available for further use.  Below we show how we utilise the I\/O resource of the Spark to maximise its flexibility for various applications:\u003c\/p\u003e\n\u003cp\u003eMic\/Line Input - This is the main mic\/line input and can be switched to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Main programme output on Dante out 1, via the top panel button\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTalkback output 1 via Dante out 5, via the top panel button or GlenController\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTalkback output 2 via Dante out 6, via GlenController only\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTalkback output 3 via Dante out 7, via GlenController only\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePermanent live output on Dante out 2\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIt is also mixed via a top panel control into a two channel headphone output as sidetone monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDante Inputs\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCue input 1 via Dante in 1, is sent to the headphones via a front panel mix pot or GlenController\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCue input 2 via Dante in 2, is sent to the headphones via a front panel mix pot or GlenController\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCue input 3 via Dante in 3, is sent to the headphones via GlenController only\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCue input 4 via Dante in 4, is sent to the headphones via GlenController only\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFurther Outputs\u003c\/strong\u003e\u003cbr\u003eDante out 3 and 4 - These outputs are in parallel to what is sent to the users headphones, making the 2 channel headphone mix available on the network\u003cbr\u003eDante out 8 - This is a 1kHz tone for assisting with line up\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSystem Control\u003c\/strong\u003e\u003cbr\u003eThe following settings on the Spark are configurable on the unit directly:\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaster headphone volume\/panning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic sidetone volume\/panning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncoming call chime volume\u003cbr\u003e\u003cbr\u003eUsing the blue side panel buttons enables configuration mode directly on the Spark.\u003cbr\u003e\u003cbr\u003eUsing the Windows 11 app GlenController enables full remote configuration and monitoring and enables the following control:\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTalk button config options\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic input gain\/pan\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhantom on\/off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompressor on\/off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePot\/switch lock\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone levels volume\/pan\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic sidetone volume\/pan\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone monitoring pot range\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncoming call chime volume\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePPM meter per input\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMulti Channel Sync With Your Computer Application\u003c\/strong\u003e\u003cbr\u003eThe Spark can easily connect with a PC or Mac and exchange bi-directional multi channel audio.  To do this use the Dante Virtual Sound Card (VSC).  This is very low cost and available directly from the Audinate web site at www.audinate.com.  The Sparks I\/O can then interface with any application running on a PC or Mac by simply selecting Dante VSC as its sound device.\u003cbr\u003e\u003cbr\u003eThis has been very popular when using browser based multi channel intercom and IP solutions.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLatest Dante Broadway Design\u003c\/strong\u003e\u003cbr\u003eThis Broadway Design can receive audio from multiple network connections, and allows a higher number of Dante inputs and outputs across the network.  The design on the Spark actually presents itself on Dante Controller with 8 inputs, and 8 outputs (see routing table graphic at top for further info)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle user commentary using Dante Broadway module\u003c\/li\u003e\n\u003cli\u003eFull remote control and monitoring using Windows 11 app GlenController\u003c\/li\u003e\n\u003cli\u003eSub compact desktop design\u003c\/li\u003e\n\u003cli\u003eAdditional Dante functionality with 8 x inputs \u0026amp; 8 x outputs on Dante Controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic preamp\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e-70dBu to -7dBu input range for -18dBFS lineup\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e47dB adjustable gain range\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eImpedeance 2k4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFreq response\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+\/- 0.01dBu 22Hz to 22kHz.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e-1.5dB roll off at 20Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Q notch filter at 20kHz\u003c\/li\u003e\n\u003cli\u003eEIN 126dB 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTHD at 0dBu output (-54in (dynamic), 39db gain to lineup at -18dBFS)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.074% @ 100Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.069% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.061% @ 10kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTHD at 0dBu output (-38in (condenser), 22db gain to lineup at -18dBFS)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.011% @ 100Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.011% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.009% @ 10kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhantom power = +48V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeadphone output\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImpedeance 32-1000 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax output level +18dBu into 600 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFreq response\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+\/- 0.01dBu 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e-0.5dBu roll off 100Hz to 22Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e-0.5dBu roll off 12kHz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDistortion 0.01% @ lineup output level\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNoise -83dBu @ line up\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSample rate 44.1kHz and 48kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 0.4 kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWidth 8cm  Depth 12.5cm  Height 8cm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106759532623,"sku":"SPARK 1","price":2098.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_2e85851d-2663-451a-8d66-35d4458d94b6.jpg?v=1776438760"},{"product_id":"glensound-spark-2-sub-compact-single-user-commentary-with-2-talkback-channels","title":"Glensound SPARK 2 Sub Compact Single User Commentary With 2 Talkback Channels","description":"\u003cp\u003eThe Spark is the most technically proficient commentary or announcers interface available, from such a small design.  For applications where desk space is at a premium, but quality and features are still paramount, Glensound proudly introduce the Spark.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark 2 - With 2 talkback channels and monitors\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGlensound Grade Mic Amp\u003c\/strong\u003e\u003cbr\u003eThe Spark includes the highly regarded Glensound Grade mic amp system.  This results in a clean audio input without distortion or clipping, that can be taken live to air with confidence and without any further processing.  The mic input is on the rear panel via a 3 pin XLR socket.  A small pot adjusts the gain level and there is a switch for 48v phantom power.  Mic gain, phantom power and the compressor can also be set via the GlenController remote software.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGlensound Referee Compressor\/Limiter System\u003c\/strong\u003e\u003cbr\u003eGlensound has been fine tuning the way input signals are managed for decades.  Glensound boxes are used in live news and sport environments, where the announcer can get immediately over enthusiastic, and be screaming down the microphone.  Glensound manage this input in two ways.  One by giving the input a high headroom to prevent clipping in the first place, then by using a specially configured compressor\/limiter system.  This system does not affect the general dynamics of the audio, so there is no lifting of levels.  It only becomes active as the signal reaches peaks and approaches clipping.  Then a gentle compression is added that, in a unifron mannar, becomes harder and harder as the signal approaches clip.  The result is a background system, that has no affect on the general dynamics of the input, but prevents it from clipping.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphones\u003c\/strong\u003e\u003cbr\u003eThe rear panel has a 6.35mm jack socket for connecting headphones from 32-1000 ohms.  The Spark features Glensound's automatic impedance matching system.  This means the relative headphone pot level will be consistent regardless of the impedance of the headphones used (as long as they are between 32-1000 ohms).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003ePower is supplied on the network connection via an Neutrik EtherCON locking RJ45 connector.  The SPARK 2 must be connected to a PoE network switch for power, or by using a midspan PoE injector.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTalk Buttons\u003c\/strong\u003e\u003cbr\u003eFor clarity, the Spark 2 uses large and bright LED buttons for mic on  and talkback.  These can be configured via GlenController remote software, and can be set in the following way:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways on\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlways off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlways on but muted when pressed (cough button)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLatching on\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMomentary push to talk\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligent (momentary and latching)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInteraction can also be set for the talkback buttons, to set if the activation of the button should mute the main programme mic.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphone Mixer\u003c\/strong\u003e\u003cbr\u003eThe front panel has two small monitoring pots that are routed to the headphones from the inputs on the Dante network.  These are sprung pots that are kept flush with the panel when not in use.  Pressing them in slightly allows them to spring out to make adjustments, and then return to the flush position.  This method allowed the functionality of pots for the monitoring input, but also allowed us to keep the overall dimensions of the Spark 2 to a minimum. \u003cbr\u003e\u003cbr\u003eUsing the GlenController remote, a total of 4 inputs can be adjusted directly (with only three adjustable directly on the unit) and each input can be set to a separate pan position.  The pots can also be set to cut at the full anti clockwise position, or just to a dim level so that the user cannot turn the monitoring input all the way off.  These features are also present on the further auxiliary and background monitoring inputs.\u003c\/p\u003e\n\u003cp\u003eThere are 4 further inputs to the headphone monitoring that can be adjusted on Glencontroller only:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSidetone to adjust the users own voice level in their headphones\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAux 1 - Mono input direct to headphones controlled only in GlenController (Aux 1\u0026amp;2 controlled together)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAux 2 - Mono input direct to headphones controlled only in GlenController (Aux 1\u0026amp;2 controlled together)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBkg - Stereo input direct to headphones controlled only in GlenController.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRouting Table\u003c\/strong\u003e\u003cbr\u003eThe Spark 2 features 8 inputs and 8 outputs across the Dante network, but it only directly needs 4 inputs and outputs.  This means that we have 4 inputs and 4 outputs on the network available for further use.  Below we show how we utilise the I\/O resource of the Spark to maximise its flexibility for various applications:\u003c\/p\u003e\n\u003cp\u003eMic\/Line Input - This is the main mic\/line input and can be switched to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Main programme output on Dante out 1, via the top panel button\u003c\/li\u003e\n\u003cli\u003eTalkback output 1 via Dante out 5, via the top panel button or GlenController\u003c\/li\u003e\n\u003cli\u003eTalkback output 2 via Dante out 6, via the top panel button or GlenController\u003c\/li\u003e\n\u003cli\u003eTalkback output 3 via Dante out 7, via GlenController only\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePermanent live output on Dante out 2\u003c\/li\u003e\n\u003cli\u003eIt is also mixed via a top panel control into a two channel headphone output as sidetone monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDante Inputs\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCue input 1 via Dante in 1, is sent to the headphones via a front panel mix pot or GlenController\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCue input 2 via Dante in 2, is sent to the headphones via a front panel mix pot or GlenController\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCue input 3 via Dante in 3, is sent to the headphones via a front panel mix pot or GlenController\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCue input 4 via Dante in 4, is sent to the headphones via GlenController only\u003cbr\u003e\u003cbr\u003eFurther Outputs\u003cbr\u003eDante out 3 and 4 - These outputs are in parallel to what is sent to the users headphones, making the 2 channel headphone mix available on the network\u003cbr\u003eDante out 8 - This is a 1kHz tone for assisting with line up\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSystem Control\u003c\/strong\u003e\u003cbr\u003eThe following settings on the Spark are configurable on the unit directly:\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaster headphone volume\/panning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic sidetone volume\/panning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncoming call chime volume\u003cbr\u003e\u003cbr\u003eUsing the blue side panel buttons enables configuration mode directly on the Spark.\u003cbr\u003e\u003cbr\u003eUsing the Windows 11 app GlenController enables full remote configuration and monitoring and enables the following control:\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTalk button config options\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic input gain\/pan\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhantom on\/off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompressor on\/off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePot\/switch lock\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone levels volume\/pan\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic sidetone volume\/pan\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone monitoring pot range\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncoming call chime volume\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePPM meter per input\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMulti Channel Sync With Your Computer Application\u003c\/strong\u003e\u003cbr\u003eThe Spark 2 can easily connect with a PC or Mac and exchange bi-directional multi channel audio.  To do this use the Dante Virtual Sound Card (VSC).  This is very low cost and available directly from the Audinate web site at www.audinate.com.  The Sparks I\/O can then interface with any application running on a PC or Mac by simply selecting Dante VSC as its sound device.\u003cbr\u003e\u003cbr\u003eThis has been very popular when using browser based multi channel intercom and IP solutions.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLatest Dante Broadway Design\u003c\/strong\u003e\u003cbr\u003eThis Broadway Design can receive audio from multiple network connections, and allows a higher number of Dante inputs and outputs across the network.  The design on the Spark 2 actually presents itself on Dante Controller with 8 inputs, and 8 outputs (see routing table graphic at top for further info)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle user commentary using Dante Broadway module\u003c\/li\u003e\n\u003cli\u003eFull remote control and monitoring using Windows 11 app GlenController\u003c\/li\u003e\n\u003cli\u003eSub compact desktop design\u003c\/li\u003e\n\u003cli\u003eAdditional Dante functionality with 8 x inputs \u0026amp; 8 x outputs on Dante Controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic preamp\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e-70dBu to -7dBu input range for -18dBFS lineup\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e47dB adjustable gain range\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eImpedeance 2k4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFreq response\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+\/- 0.01dBu 22Hz to 22kHz.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e-1.5dB roll off at 20Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Q notch filter at 20kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEIN 126dB 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTHD at 0dBu output (-54in (dynamic), 39db gain to lineup at -18dBFS)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.074% @ 100Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.069% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.061% @ 10kHz\u003c\/li\u003e\n\u003cli\u003eTHD at 0dBu output (-38in (condenser), 22db gain to lineup at -18dBFS)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.011% @ 100Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.011% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.009% @ 10kHz\u003c\/li\u003e\n\u003cli\u003ePhantom power = +48V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone output\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eImpedeance 32-1000 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax output level +18dBu into 600 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFreq response\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+\/- 0.01dBu 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e-0.5dBu roll off 100Hz to 22Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e-0.5dBu roll off 12kHz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDistortion 0.01% @ lineup output level\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNoise -83dBu @ line up\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSample rate 44.1kHz and 48kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 0.4 kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWidth 8cm  Depth 12.5cm  Height 8cm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106809733199,"sku":"SPARK 2","price":2167.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_0bb36ddb-ad98-49fd-9b35-cfc4772683c3.jpg?v=1776440218"},{"product_id":"glensound-spark-3-sub-compact-single-user-commentary-with-3-talkback-channels","title":"Glensound SPARK 3 Sub Compact Single User Commentary With 3 Talkback Channels","description":"\u003cp\u003eThe Spark is the most technically proficient commentary or announcers interface available, from such a small design.  For applications where desk space is at a premium, but quality and features are still paramount, Glensound proudly introduce the Spark.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpark 3 - With 3 talkback channels and monitors\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGlensound Grade Mic Amp\u003c\/strong\u003e\u003cbr\u003eThe Spark includes the highly regarded Glensound Grade mic amp system.  This results in a clean audio input without distortion or clipping, that can be taken live to air with confidence and without any further processing.  The mic input is on the rear panel via a 3 pin XLR socket.  A small pot adjusts the gain level and there is a switch for 48v phantom power.  Mic gain, phantom power and the compressor can also be set via the GlenController remote software.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGlensound Referee Compressor\/Limiter System\u003c\/strong\u003e\u003cbr\u003eGlensound has been fine tuning the way input signals are managed for decades.  Glensound boxes are used in live news and sport environments, where the announcer can get immediately over enthusiastic, and be screaming down the microphone.  Glensound manage this input in two ways.  One by giving the input a high headroom to prevent clipping in the first place, then by using a specially configured compressor\/limiter system.  This system does not affect the general dynamics of the audio, so there is no lifting of levels.  It only becomes active as the signal reaches peaks and approaches clipping.  Then a gentle compression is added that, in a unifron mannar, becomes harder and harder as the signal approaches clip.  The result is a background system, that has no affect on the general dynamics of the input, but prevents it from clipping.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphones\u003c\/strong\u003e\u003cbr\u003eThe rear panel has a 6.35mm jack socket for connecting headphones from 32-1000 ohms.  The Spark features Glensound's automatic impedance matching system.  This means the relative headphone pot level will be consistent regardless of the impedance of the headphones used (as long as they are between 32-1000 ohms).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003ePower is supplied on the network connection via an Neutrik EtherCON locking RJ45 connector.  The SPARK 3 must be connected to a PoE network switch for power, or by using a midspan PoE injector.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTalk Buttons\u003c\/strong\u003e\u003cbr\u003eFor clarity, the Spark 3 uses large and bright LED buttons for mic on  and talkback.  These can be configured via GlenController remote software, and can be set in the following way:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways on\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlways off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlways on but muted when pressed (cough button)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLatching on\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMomentary push to talk\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligent (momentary and latching)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInteraction can also be set for the talkback buttons, to set if the activation of the button should mute the main programme mic.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphone Mixer\u003c\/strong\u003e\u003cbr\u003eThe front panel has two small monitoring pots that are routed to the headphones from the inputs on the Dante network.  These are sprung pots that are kept flush with the panel when not in use.  Pressing them in slightly allows them to spring out to make adjustments, and then return to the flush position.  This method allowed the functionality of pots for the monitoring input, but also allowed us to keep the overall dimensions of the Spark 3 to a minimum. \u003cbr\u003e\u003cbr\u003eUsing the GlenController remote, a total of 4 inputs can be adjusted directly (with only three adjustable directly on the unit) and each input can be set to a separate pan position.  The pots can also be set to cut at the full anti clockwise position, or just to a dim level so that the user cannot turn the monitoring input all the way off.  These features are also present on the further auxiliary and background monitoring inputs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere are 4 further inputs to the headphone monitoring that can be adjusted on Glencontroller only:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSidetone to adjust the users own voice level in their headphones\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAux 1 - Mono input direct to headphones controlled only in GlenController (Aux 1\u0026amp;2 controlled together)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAux 2 - Mono input direct to headphones controlled only in GlenController (Aux 1\u0026amp;2 controlled together)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBkg - Stereo input direct to headphones controlled only in GlenController.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRouting Table\u003c\/strong\u003e\u003cbr\u003eThe Spark 3 features 8 inputs and 8 outputs across the Dante network, but it only directly needs 4 inputs and outputs.  This means that we have 4 inputs and 4 outputs on the network available for further use.  Below we show how we utilise the I\/O resource of the Spark to maximise its flexibility for various applications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic\/Line Input - This is the main mic\/line input and can be switched to:\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe Main programme output on Dante out 1, via the top panel button\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTalkback output 1 via Dante out 5, via the top panel button or GlenController\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTalkback output 2 via Dante out 6, via the top panel button or GlenController\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTalkback output 3 via Dante out 7, via the top panel button or GlenController\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePermanent live output on Dante out 2\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIt is also mixed via a top panel control into a two channel headphone output as sidetone monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDante Inputs\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCue input 1 via Dante in 1, is sent to the headphones via a front panel mix pot or GlenController\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCue input 2 via Dante in 2, is sent to the headphones via a front panel mix pot or GlenController\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCue input 3 via Dante in 3, is sent to the headphones via a front panel mix pot or GlenController\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCue input 4 via Dante in 4, is sent to the headphones via a front panel mix pot or GlenController\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFurther Outputs\u003c\/strong\u003e\u003cbr\u003eDante out 3 and 4 - These outputs are in parallel to what is sent to the users headphones, making the 2 channel headphone mix available on the network\u003cbr\u003eDante out 8 - This is a 1kHz tone for assisting with line up\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSystem Control\u003c\/strong\u003e\u003cbr\u003eThe following settings on the Spark are configurable on the unit directly:\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaster headphone volume\/panning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic sidetone volume\/panning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncoming call chime volume\u003cbr\u003e\u003cbr\u003eUsing the blue side panel buttons enables configuration mode directly on the Spark.\u003cbr\u003e\u003cbr\u003eUsing the Windows 11 app GlenController enables full remote configuration and monitoring and enables the following control:\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTalk button config options\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic input gain\/pan\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhantom on\/off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompressor on\/off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePot\/switch lock\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone levels volume\/pan\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic sidetone volume\/pan\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone monitoring pot range\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncoming call chime volume\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePPM meter per input\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMulti Channel Sync With Your Computer Application\u003c\/strong\u003e\u003cbr\u003eThe Spark 3 can easily connect with a PC or Mac and exchange bi-directional multi channel audio.  To do this use the Dante Virtual Sound Card (VSC).  This is very low cost and available directly from the Audinate web site at www.audinate.com.  The Sparks I\/O can then interface with any application running on a PC or Mac by simply selecting Dante VSC as its sound device.\u003cbr\u003e\u003cbr\u003eThis has been very popular when using browser based multi channel intercom and IP solutions.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLatest Dante Broadway Design\u003c\/strong\u003e\u003cbr\u003eThis Broadway Design can receive audio from multiple network connections, and allows a higher number of Dante inputs and outputs across the network.  The design on the Spark 3 actually presents itself on Dante Controller with 8 inputs, and 8 outputs (see routing table graphic at top for further info)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle user commentary using Dante Broadway module\u003c\/li\u003e\n\u003cli\u003eFull remote control and monitoring using Windows 11 app GlenController\u003c\/li\u003e\n\u003cli\u003eSub compact desktop design\u003c\/li\u003e\n\u003cli\u003eAdditional Dante functionality with 8 x inputs \u0026amp; 8 x outputs on Dante Controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic preamp\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e-70dBu to -7dBu input range for -18dBFS lineup\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e47dB adjustable gain range\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eImpedeance 2k4\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFreq response\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+\/- 0.01dBu 22Hz to 22kHz.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e-1.5dB roll off at 20Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Q notch filter at 20kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEIN 126dB 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTHD at 0dBu output (-54in (dynamic), 39db gain to lineup at -18dBFS)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.074% @ 100Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.069% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.061% @ 10kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTHD at 0dBu output (-38in (condenser), 22db gain to lineup at -18dBFS)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.011% @ 100Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.011% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.009% @ 10kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhantom power = +48V\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeadphone output\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImpedeance 32-1000 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax output level +18dBu into 600 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFreq response\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+\/- 0.01dBu 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e-0.5dBu roll off 100Hz to 22Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e-0.5dBu roll off 12kHz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDistortion 0.01% @ lineup output level\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNoise -83dBu @ line up\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSample rate 44.1kHz and 48kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 0.4 kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWidth 8cm  Depth 12.5cm  Height 8cm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106826018895,"sku":"SPARK 3","price":2246.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_c7ae959e-79b5-46b4-995e-524ac4bf158c.jpg?v=1776441021"},{"product_id":"glensound-express-ip-mini-compact-2-user-dante-aes67-commentary-unit","title":"Glensound EXPRESS ip MINI Compact 2 User Dante\/ AES67 Commentary Unit","description":"\u003cp\u003eThe Express\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eip\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eMini is a compact simple to operate, 2 user network audio commentary box, that is ideal for both the occasional \u0026amp; the daily provider of commentary facilities.\u003c\/p\u003e\n\u003cp\u003eIts low cost keeps the accountant happy, its simple facilities makes it very easy to setup for the engineer and the familiar Glensound control surface keeps the commentators satisfied.\u003c\/p\u003e\n\u003cp\u003eHaving been involved in designing and manufacturing commentary boxes for over 40 years the Express\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eip\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eMini is a culmination of all our years of experience and has been designed to provide just enough of the basic facilities required for everyday commentary in a very robust \u0026amp; easy to use package.\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eMINI\u003cbr\u003e\u003c\/strong\u003eThe new Express ip MINI is SMALL !\u003cbr\u003eIn one of the pictures above it can be seen compared to the original Express ip\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo Four Wire Circuits\u003c\/strong\u003e\u003cbr\u003eThe Express ip Mini has two talkback circuits. Each commentator has their own talkback buttons. The push buttons for each circuit feature Config + and as such are configurable and can operate in different modes:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatching on\/off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMomentary push to talk (PTT)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligent mode where a short tap is latching, but a longer hold becomes momentary\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlways on and mutes when pressed (cough mode)\u003cbr\u003e\u003cbr\u003ePressing a talkback button removes the mic from the main output and directs it to the talkback output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeadphone Monitoring\u003c\/strong\u003e\u003cbr\u003eThere are 4 inputs into the headphone mixer. Each commentator has individual pots to set their preferred mix of these sources. There is a 5th pot for adjusting the level of the commentator's own voice (sidetone) and a 6th pot for adjusting the level of the other commentator’s voice in their headphones.\u003c\/p\u003e\n\u003cp\u003eThe front panel has 2 x 6.35mm jack sockets for connecting the commentators’ headphones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Inputs\u003c\/strong\u003e\u003cbr\u003eBoth mic inputs are on front panel 3 pin XLR connections. The input is switchable to add 48V phantom.\u003c\/p\u003e\n\u003cp\u003eEach commentator has a mic on\/off button that can also be configured to be always on, muting the input when held down (cough button).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Gains\u003c\/strong\u003e\u003cbr\u003eTwo front panel rotary controls can be used for adjusting the microphone amplifiers input gain by +10\/-20 dB. The lineup gain of the microphone amplifier automatically reduces by 10dB when the phantom power switch is turned on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompressor Limiter Circuits\u003c\/strong\u003e\u003cbr\u003eEach microphone input has its own compressor\/ limiter circuit to prevent audio overload by an excited commentator.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Audio Link\u003c\/strong\u003e\u003cbr\u003eThe Express \u003cem\u003eip\u003c\/em\u003e MINI is Dante®\/ AES67 network audio compatible. The network connection is via a single EtherCON RJ45. This link carries:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 audio inputs *PLEASE SEE SPECIFICATIONS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 audio outputs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower over Ethernet (PoE)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe four audio outputs that go into the Dante network are:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalkback 1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTalkback 2\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic 1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic 2 or Mix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 4th output ‘Mic 2 or Mix’,  can be selected via a rear panel switch to be the direct B mic, or a mix of both the A and B mics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePPM Meter\u003c\/strong\u003e\u003cbr\u003eThere is a seven segment PPM meter that shows the mix output level as both dBu and BBC PPM 1 - 7 scale.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eThe Express \u003cem\u003eip\u003c\/em\u003e MINI is powered by Power over Ethernet PoE and can be connected to PoE enabled switches and midspan power sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact two person commentary\u003c\/li\u003e\n\u003cli\u003eSmall lightweight \u0026amp; rugged\u003c\/li\u003e\n\u003cli\u003eDante®\/ AES67 network audio interface\u003c\/li\u003e\n\u003cli\u003eFour external monitor inputs\u003c\/li\u003e\n\u003cli\u003eSidetone (own voice) monitor circuit\u003c\/li\u003e\n\u003cli\u003eOther Commentator monitor circuit\u003c\/li\u003e\n\u003cli\u003eTwo common talkback circuits\u003c\/li\u003e\n\u003cli\u003eOperation of talkback buttons configurable\u003c\/li\u003e\n\u003cli\u003eMic inputs with selectable 48v phantom power\u003c\/li\u003e\n\u003cli\u003eMic input gain controls\u003c\/li\u003e\n\u003cli\u003eCompressor\/ Limiter circuits on each mic input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMICROPHONE INPUTS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic Lineup Gain (Dynamic): 60dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic Lineup Gain (Phantom Power): 35dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic Gain Range: +10\/ -20dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 1k2\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhantom Power: 48 Volts @ 6mA\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: 125dBu (Dynamic Mic 22-22kHz RMS terminated with 300 Ohms)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level (Dynamic): -13dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level (Phantom): +12dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDigital Line Up: +dBu = -18dBFs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTHD + Noise: \u0026lt;0.011% @ 10kHz ref +8dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONES:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolume Pot Range: +10dB to Off (+10dB to -30dB factory fit option)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Impedance: 35 - 1000 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Headphone Output: +15dBu into 600 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Frequency Response: \u0026lt;= 2dB 50Hz to 24kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK INTERFACE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical: Neutrik Ethercon\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: RJ45 compatible\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChipset: This device uses Audinate's Ultimo chipset\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoE: Standard 48V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Consumption: \u0026lt; 4Watts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePoE:  Via RJ45 connection from a PoE switch or Mid Span source\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSIZE \u0026amp; WEIGHT\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 157 x 183 x 74mm (W x D x H)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 0.74 Kg (1.6 lb) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK AUDIO INPUTS****\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis device uses Audinate's Ultimo Chipset.  Although a 4 channel chipset it can only receive audio from 2 different network streams.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106863603791,"sku":"EXPRESS ip MINI","price":2857.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_459f82d4-be7b-4e17-a704-3acb47e4e25d.jpg?v=1776441465"},{"product_id":"glensound-express-ip-mini-x-compact-2-user-dante-aes67-commentary-unit","title":"Glensound EXPRESS ip MINI X Compact 2 User Dante\/ AES67 Commentary Unit","description":"\u003cp\u003eThe Express \u003cem\u003eip\u003c\/em\u003e Mini is a compact simple to operate, 2 user network audio commentary box, that is ideal for both the occasional \u0026amp; the daily provider of commentary facilities.\u003c\/p\u003e\n\u003cp\u003eIts low cost keeps the accountant happy, its simple facilities makes it very easy to setup for the engineer and the familiar Glensound control surface keeps the commentators satisfied.\u003c\/p\u003e\n\u003cp\u003eHaving been involved in designing and manufacturing commentary boxes for over 40 years the Express \u003cem\u003eip\u003c\/em\u003e Mini is a culmination of all our years of experience and has been designed to provide just enough of the basic facilities required for everyday commentary in a very robust \u0026amp; easy to use package.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMINI X\u003c\/strong\u003e\u003cbr\u003eThe new Express ip MINI X is SMALL !\u003cbr\u003eIn one of the pictures above it can be seen compared to the original Express ip\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo Four Wire Circuits\u003c\/strong\u003e\u003cbr\u003eThe Express ip Mini has two talkback circuits. Each commentator has their own talkback buttons. The push buttons for each circuit feature Config + and as such are configurable and can operate in different modes:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatching on\/off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMomentary push to talk (PTT)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligent mode where a short tap is latching, but a longer hold becomes momentary\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlways on and mutes when pressed (cough mode)\u003cbr\u003e\u003cbr\u003ePressing a talkback button removes the mic from the main output and directs it to the talkback output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeadphone Monitoring\u003c\/strong\u003e\u003cbr\u003eThere are 4 inputs into the headphone mixer. Each commentator has individual pots to set their preferred mix of these sources. There is a 5th pot for adjusting the level of the commentator's own voice (sidetone) and a 6th pot for adjusting the level of the other commentator’s voice in their headphones.\u003c\/p\u003e\n\u003cp\u003eThe front panel has 2 x 6.35mm jack sockets for connecting the commentators’ headphones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Inputs\u003c\/strong\u003e\u003cbr\u003eBoth mic inputs are on front panel 3 pin XLR connections. The input is switchable to add 48V phantom.\u003c\/p\u003e\n\u003cp\u003eEach commentator has a mic on\/off button that can also be configured to be always on, muting the input when held down (cough button).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Gains\u003c\/strong\u003e\u003cbr\u003eTwo front panel rotary controls can be used for adjusting the microphone amplifiers input gain by +10\/-20 dB. The lineup gain of the microphone amplifier automatically reduces by 10dB when the phantom power switch is turned on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompressor Limiter Circuits\u003c\/strong\u003e\u003cbr\u003eEach microphone input has its own compressor\/ limiter circuit to prevent audio overload by an excited commentator.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Audio Link\u003c\/strong\u003e\u003cbr\u003eThe Express \u003cem\u003eip\u003c\/em\u003e MINI X is Dante®\/ AES67 network audio compatible. The network connection is via a single EtherCON RJ45. This link carries:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 audio inputs *PLEASE SEE SPECIFICATIONS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 audio outputs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower over Ethernet (PoE)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe four audio outputs that go into the Dante network are:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalkback 1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTalkback 2\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic 1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic 2 or Mix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 4th output ‘Mic 2 or Mix’,  can be selected via a rear panel switch to be the direct B mic, or a mix of both the A and B mics. \u003c\/p\u003e\n\u003cp\u003eThe Express \u003cem\u003eip\u003c\/em\u003e MINI X has direct XLR line level ouputs of Mic A, Mic B and a mix of both\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePPM Meter\u003c\/strong\u003e\u003cbr\u003eThere is a seven segment PPM meter that shows the mix output level as both dBu and BBC PPM 1 - 7 scale.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eThe Express \u003cem\u003eip\u003c\/em\u003e MINI X is powered by Power over Ethernet PoE and can be connected to PoE enabled switches and midspan power sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact two person commentary\u003c\/li\u003e\n\u003cli\u003eSmall lightweight \u0026amp; rugged\u003c\/li\u003e\n\u003cli\u003eDante®\/ AES67 network audio interface\u003c\/li\u003e\n\u003cli\u003eFour external monitor inputs\u003c\/li\u003e\n\u003cli\u003eSidetone (own voice) monitor circuit\u003c\/li\u003e\n\u003cli\u003eOther Commentator monitor circuit\u003c\/li\u003e\n\u003cli\u003eTwo common talkback circuits\u003c\/li\u003e\n\u003cli\u003eOperation of talkback buttons configurable\u003c\/li\u003e\n\u003cli\u003eMic inputs with selectable 48v phantom power\u003c\/li\u003e\n\u003cli\u003eMic input gain controls\u003c\/li\u003e\n\u003cli\u003eCompressor\/ Limiter circuits on each mic input\u003c\/li\u003e\n\u003cli\u003eHas direct XLR line level ouputs of Mic A, Mic B and a mix of both\u003c\/li\u003e\n\u003cli\u003ePoE and mains\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMICROPHONE INPUTS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic Lineup Gain (Dynamic): 60dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic Lineup Gain (Phantom Power): 35dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic Gain Range: +10\/ -20dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 1k2\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhantom Power: 48 Volts @ 6mA\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: 125dBu (Dynamic Mic 22-22kHz RMS terminated with 300 Ohms)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level (Dynamic): -13dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level (Phantom): +12dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDigital Line Up: +dBu = -18dBFs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTHD + Noise: \u0026lt;0.011% @ 10kHz ref +8dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAnalogue Outputs\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHas direct XLR line level ouputs of Mic A, Mic B and a mix of both\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONES:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolume Pot Range: +10dB to Off (+10dB to -30dB factory fit option)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Impedance: 35 - 1000 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Headphone Output: +15dBu into 600 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Frequency Response: \u0026lt;= 2dB 50Hz to 24kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK INTERFACE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical: Neutrik Ethercon\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: RJ45 compatible\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChipset: This device uses Audinate's Ultimo chipset\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoE: Standard 48V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Consumption: \u0026lt; 4Watts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePoE:  Via RJ45 connection from a PoE switch or Mid Span source\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAC mains: Switch mode on IEC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSIZE \u0026amp; WEIGHT\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 157 x 183 x 74mm (W x D x H)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 0.74 Kg (1.6 lb) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK AUDIO INPUTS****\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis device uses Audinate's Ultimo Chipset.  Although a 4 channel chipset it can only receive audio from 2 different network streams.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106877890639,"sku":"EXPRESS ip MINI X","price":3162.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_03ce8dfb-ec64-44b6-a0b7-fa5d5da95211.jpg?v=1776442805"},{"product_id":"glensound-inferno-single-commentators-box-for-dante-audio-networks","title":"Glensound INFERNO Single Commentator's Box For Dante Audio Networks","description":"\u003cp\u003e\u003cstrong\u003eLinks To Dante Compatible Network Or DARK88 Break Out Box\u003c\/strong\u003e\u003cbr\u003eInferno can be used on its own when connected to a Dante audio network. Many audio routers, consoles and intercom systems are Dante compatible, and will accept the Inferno link, enabling Glensound grade commentary into the audio network.\u003c\/p\u003e\n\u003cp\u003eThere are primary and secondary Dante network connections\u003c\/p\u003e\n\u003cp\u003eInferno can also be used outside of a dedicated Dante network when connected to one of our DARK or AoIP44 break out boxes. This connection can be direct or across a structured network. The DARK or AoIP44 units allow all of the audio inputs and outputs to be located in a place separate from the Inferno.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgrammable On A Dante Audio Network\u003c\/strong\u003e\u003cbr\u003eWhen connected to a Dante network, sources and destinations can be configured from any part of the network using the free Dante controller software. Details are available at www.audinate.com.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeven Talkback Circuits\u003c\/strong\u003e\u003cbr\u003eThe seven illuminated talkback buttons route the audio input to 7 different destinations and remove the audio from the main programme output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEight Input Headphone Mixer\u003c\/strong\u003e\u003cbr\u003eSeven external sources plus sidetone are presented on eight level controls allowing the user to create their own required monitoring mix of all sources. Each input can be independently selected to be on the user's left ear, right ear or both ears. The headphone connection is available on a 3.5mm and a 6.35mm jack socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Input\u003c\/strong\u003e\u003cbr\u003eThe single input is switchable on the rear panel to be line\/mic\/48v and has adjustable input gain. The input also features Glensound’s Referee compressor limiter system. This applies a variable rate compressor to the input peaks so that no clipping occurs, without affecting the rest of the audio signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemote Control\u003c\/strong\u003e\u003cbr\u003eThe Inferno contains a web server, allowing remote functionality to an engineer from any PC connected to the network via any web browser.  Enter the IP address of the Inferno in the browser for remote control of the front end mic gain.  It also allows configuration of each push button on the unit to be on\/off latching, momentary (push to talk), always on, and off when pushed (cough), or in an intelligent mode where a short press latches or a longer press is just momentary.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e15 segment LED PPM Meter \u003c\/strong\u003e\u003cbr\u003eAudio input level is indicated on the 15 segment PPM meter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower On Dante Link Or Locally\u003c\/strong\u003e\u003cbr\u003eInferno can be powered via the network audio connection if it conforms to the PoE standard. There is also an internal 100v-240v mains supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eScalable Commentary\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStart with one Inferno into a Dante network\u003c\/li\u003e\n\u003cli\u003eAdd Multiple Inferno at any time for 2, 3, 4 ,5 or more commentator system\u003c\/li\u003e\n\u003cli\u003eUse the DARK units for a simple point to point networked audio break out box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle user Dante commentary box\u003c\/li\u003e\n\u003cli\u003eSystem is scalable with multiple commentators as part of a Dante network\u003c\/li\u003e\n\u003cli\u003eCan connect to any Dante compatible network or directly to our DARK units.\u003c\/li\u003e\n\u003cli\u003eSingle mic\/line\/48v input with Referee compressor\/limiter\u003c\/li\u003e\n\u003cli\u003eHeadphone mixer has 7 inputs supplied from the Dante network, plus the local input (sidetone)\u003c\/li\u003e\n\u003cli\u003eEach headphone input has left\/both\/right headphone switching \u003c\/li\u003e\n\u003cli\u003e7 talkback circuits are programmable via the Dante network\u003c\/li\u003e\n\u003cli\u003eBrowser based remote control of input gain and switching functions\u003c\/li\u003e\n\u003cli\u003ePoE, Mains or DC powering options\u003c\/li\u003e\n\u003cli\u003eAlso Available in AES67\/Ravenna Version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO INPUT\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Type: Neutrik 3 pin XLR\u003c\/li\u003e\n\u003cli\u003eInput Impedance: Mic: 2k4\u003c\/li\u003e\n\u003cli\u003eLine 100k\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: 127dBu (22Hz-22KHz) RMS A weighted Terminated with 300 Ohms)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency response:  Mic -2dBu @25Hz flat @50Hz till 22kHz (+\/- 0.25dBu).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine flat till 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDistortion at +8dBu:  100Hz = 0.023%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1kHz =0.012%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10kHz = 0.014%\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLine Up Gains: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Mic: 58dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic + Phantom Power: 35dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: 0dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGain Range:                \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic: -30 to +15dB\u003c\/li\u003e\n\u003cli\u003eLine: +\/-15dB \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMax Input Before Clipping (@line up): \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Mic: +10dBU,\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic+phantom: +18dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: +18dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeadphone Impedance: 16-1000 ohm (auto output level to match impedance)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Noise:  -76.6dB @ line up (residual noise)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Frequency Response:  \u0026gt;-0.1dB 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone THD + Noise (Ref +8dB): 0.008% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnection: 6.35mm \u0026amp; 3.5mm stereo jack plugs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Volume Pot Range: +10dB to Off (can be configured +10dB to -30dB)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Headphone Output: +16.8dB into 600 Ohms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMains: 1 x Filtered IEC, 100 to 240VAC (+\/-10%) 47-63Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePoE: Can be powered by PoE on either Copper network interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC Input: 2.5mm Barrel, Centre +Ve, 9 - 15 Volts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption: Front Panel Power On LED: Bright Blue\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRear Panel Power On Indicators: 1 green LED showing presence of each of the above power sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 137 x 210 x 86mm (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 1.25Kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMechanics: All aluminium construction, anodised and laser etched, powder coated sides\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Carton: Rugged Export Quality cardboard carton 610 x 420 x 170mm (WxDxH)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: 0 to +50°C (32 to 122°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70°C (-4 to 158°C)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 0 to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook: Physical A4 (Soft copy can be downloaded)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMains Cable: UK \u0026amp; EU only, 2 metre mains plug to IEC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable: 1 off 2 Metre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOPTIONAL ITEMS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarrying Case: Polypropylene Carrying Case\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSFP Fibre Modules: Multi Mode, Single Mode and Bi-directional on single Fibre available\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExternal DC Power Supply: Switch mode (100 - 250VAC) desktop style with IEC mains input \u0026amp; 1.5 metre DC output cable  \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK OPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDANTE\/AES67 VERSION\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSample Frequency: 48K\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution: 24 Bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; Routing: Via Free Dante Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Can be configured for AES67\u003c\/li\u003e\n\u003cli\u003eRAVENNA\/AES67 VERSION\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67:  Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Sample Rates: 44.1kHz - 192kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePTPv2: Master or Slave, IEEE-1588-2008 standard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST 2110-30:  Yes.  Including level C and CX\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST2022-7:  Yes.  Seamless data switching\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNMOS IS-04 (Disovery):  Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNMOS IS-05 Routing):  Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemote Control:  Web browser or Aneman\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106884706383,"sku":"INFERNO","price":3960.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_b7f85399-9d31-434c-9277-c8cfe6317c67.jpg?v=1776443522"},{"product_id":"glensound-inferno-plus-single-commentators-box-with-additional-analogue-outputs","title":"Glensound INFERNO PLUS Single Commentator's Box With Additional Analogue Outputs","description":"\u003cp\u003e\u003cstrong\u003eLinks To Dante Compatible Network Or DARK88 Break Out Box\u003c\/strong\u003e\u003cbr\u003eInferno can be used on its own when connected to a Dante audio network. Many audio routers, consoles and intercom systems are Dante compatible, and will accept the Inferno link, enabling Glensound grade commentary into the audio network.\u003c\/p\u003e\n\u003cp\u003eThere are primary and secondary Dante network connections\u003c\/p\u003e\n\u003cp\u003eInferno can also be used outside of a dedicated Dante network when connected to one of our DARK or AoIP break out boxes. This connection can be direct or across a structured network. The DARK or AoIP units allow all of the audio inputs and outputs to be located in a place separate from the Inferno.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgrammable On A Dante Audio Network\u003c\/strong\u003e\u003cbr\u003eWhen connected to a Dante network, sources and destinations can be configured from any part of the network using the free Dante controller software. Details are available at www.audinate.com.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeven Talkback Circuits\u003c\/strong\u003e\u003cbr\u003eThe seven illuminated talkback buttons route the audio input to 7 different destinations and remove the audio from the main programme output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEight Input Headphone Mixer\u003c\/strong\u003e\u003cbr\u003eSeven external sources plus sidetone are presented on eight level controls allowing the user to create their own required monitoring mix of all sources. Each input can be independently selected to be on the user's left ear, right ear or both ears. The headphone connection is available on a 3.5mm and a 6.35mm jack socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Input\u003c\/strong\u003e\u003cbr\u003eThe single input is switchable on the rear panel to be line\/mic\/48v and has adjustable input gain. The input also features Glensound’s Referee compressor limiter system. This applies a variable rate compressor to the input peaks so that no clipping occurs, without affecting the rest of the audio signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLocal Analogue Outputs\u003c\/strong\u003e\u003cbr\u003eOver the standard Inferno, the Inferno Plus adds two analogue outputs on 3 pin XLR for a analogue passthrough of the mic input.  This allows analogue backup signals of the mic should the network fail. \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutput 1 is the main mic programme output\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput 2 (AUX) is activated with talkback button 1 and routes the main mic to this output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRemote Control\u003c\/strong\u003e\u003cbr\u003eThe Inferno contains a web server, allowing remote functionality to an engineer from any PC connected to the network via any web browser.  Enter the IP address of the Inferno in the browser for remote control of the front end mic gain.  It also allows configuration of each push button on the unit to be on\/off latching, momentary (push to talk), always on, and off when pushed (cough), or in an intelligent mode where a short press latches or a longer press is just momentary.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e15 segment LED PPM Meter \u003c\/strong\u003e\u003cbr\u003eAudio input level is indicated on the 15 segment PPM meter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower On Dante Link Or Locally\u003c\/strong\u003e\u003cbr\u003eInferno can be powered via the network audio connection if it conforms to the PoE standard. There is also an internal 100v-240v mains supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eScalable Commentary\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStart with one Inferno into a Dante network\u003c\/li\u003e\n\u003cli\u003eAdd Multiple Inferno at any time for 2, 3, 4 ,5 or more commentator system\u003c\/li\u003e\n\u003cli\u003eUse the DARK units for a simple point to point networked audio break out box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle user Dante commentary box\u003c\/li\u003e\n\u003cli\u003eIncludes additional analogue outputs\u003c\/li\u003e\n\u003cli\u003eSystem is scalable with multiple commentators as part of a Dante network\u003c\/li\u003e\n\u003cli\u003eSingle mic\/line\/48v input with Referee compressor\/limiter\u003c\/li\u003e\n\u003cli\u003eHeadphone mixer has 7 inputs supplied from the Dante network, plus the local input (sidetone)\u003c\/li\u003e\n\u003cli\u003eEach headphone input has left\/both\/right headphone switching \u003c\/li\u003e\n\u003cli\u003e7 talkback circuits are programmable via the Dante network\u003c\/li\u003e\n\u003cli\u003eBrowser based remote control of input gain and switching functions\u003c\/li\u003e\n\u003cli\u003ePoE, Mains or DC powering options\u003c\/li\u003e\n\u003cli\u003eAlso Available in AES67\/Ravenna Version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO INPUT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Type: Neutrik 3 pin XLR\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInput Impedance: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic: 2k4\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine 100k\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: 127dBu (22Hz-22KHz) RMS A weighted Terminated with 300 Ohms)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency response:  Mic -2dBu @25Hz flat @50Hz till 22kHz (+\/- 0.25dBu).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine flat till 22kHz\u003cbr\u003e\u003cbr\u003eDistortion at +8dBu:  100Hz = 0.023%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1kHz =0.012%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10kHz = 0.014%\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLine Up Gains:            \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Mic: 58dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic + Phantom Power: 35dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: 0dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGain Range:                \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic: -30 to +15dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: +\/-15dB \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMax Input Before Clipping (@line up):                                   \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Mic: +10dBU,\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic+phantom: +18dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: +18dBu\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAUDIO OUTPUT\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOutput type:                \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Neutrik 3 pin XLR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeadphone Impedance: 16-1000 ohm (auto output level to match impedance)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Noise:  -76.6dB @ line up (residual noise)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Frequency Response:  \u0026gt;-0.1dB 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone THD + Noise (Ref +8dB): 0.008% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnection: 6.35mm \u0026amp; 3.5mm stereo jack plugs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Volume Pot Range: +10dB to Off (can be configured +10dB to -30dB)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Headphone Output: +16.8dB into 600 Ohms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMains: 1 x Filtered IEC, 100 to 240VAC (+\/-10%) 47-63Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePoE: Can be powered by PoE on either Copper network interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC Input: 2.5mm Barrel, Centre +Ve, 9 - 15 Volts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption: Front Panel Power On LED: Bright Blue\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRear Panel Power On Indicators: 1 green LED showing presence of each of the above power sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: TBC (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 1.25Kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMechanics: All aluminium construction, anodised and laser etched, powder coated sides\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Carton: Rugged Export Quality cardboard carton 610 x 420 x 170mm (WxDxH)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: 0 to +50°C (32 to 122°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70°C (-4 to 158°C)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 0 to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMains Cable: UK \u0026amp; EU only, 2 metre mains plug to IEC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable: 1 off 2 Metre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOPTIONAL ITEMS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarrying Case: Polypropylene Carrying Case\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSFP Fibre Modules: Multi Mode, Single Mode and Bi-directional on single Fibre available\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExternal DC Power Supply: Switch mode (100 - 250VAC) desktop style with IEC mains input \u0026amp; 1.5 metre DC output cable  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK OPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDANTE\/AES67 VERSION\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSample Frequency: 48K\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution: 24 Bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; Routing: Via Free Dante Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Can be configured for AES67\u003c\/li\u003e\n\u003cli\u003eRAVENNA\/AES67 VERSION\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Sample Rates: 44.1kHz - 192kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePTPv2: Master or Slave, IEEE-1588-2008 standard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST 2110-30: Yes. Including level C and CX\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST2022-7: Yes. Seamless data switching\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNMOS IS-04 (Disovery): Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNMOS IS-05 Routing): Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemote Control: Web browser or Aneman\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106891882575,"sku":"INFERNO PLUS","price":4235.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_cfd125f9-3791-405d-966b-f0981545157a.jpg?v=1776444414"},{"product_id":"glensound-inferno-r-plus-single-user-commentators-unit-with-dual-cat5-and-optical-ravenna-smpte-st-2210-interface","title":"Glensound INFERNO\/R PLUS Single User Commentators Unit With Dual CAT5 And Optical Ravenna\/SMPTE ST-2210 Interface","description":"\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eSingle user Ravenna commentary box\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eIncludes additional analogue outputs\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSystem is scalable with multiple commentators as part of a Ravenna network\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSingle mic\/line\/48v input with Referee compressor\/limiter\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHeadphone mixer has 7 inputs supplied from the Ravenna network, plus the local input (sidetone)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eEach headphone input has left\/both\/right headphone switching\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e7 talkback circuits are programmable via the Ravenna network\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBrowser based remote control of input gain and switching functions\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePoE, Mains or DC powering options\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106940674127,"sku":"INFERNO\/R PLUS","price":4435.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/ContainerBridge_1024x1024_2x_612fb6d6-68bc-4e5d-97a6-04eee524592c.webp?v=1776444977"},{"product_id":"glensound-inferno-r-single-user-commentators-unit-with-dual-cat5-and-optical-ravenna-smpte-st-2110-interface","title":"Glensound INFERNO\/R Single User Commentators Unit With Dual CAT5 And Optical Ravenna\/SMPTE ST-2110 Interface","description":"\u003cp\u003e\u003cspan\u003eSystem is scalable with multiple commentators as part of a Ravenna network\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCan connect to any Ravenna compatible network or directly to our DARK units.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSingle mic\/line\/48v input with Referee compressor\/limiter\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eHeadphone mixer has 7 inputs supplied from the Ravenna network, plus the local input (sidetone)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eEach headphone input has left\/both\/right headphone switching\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e7 talkback circuits are programmable via the Ravenna network\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBrowser based remote control of input gain and switching functions\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePoE, Mains or DC powering options\u003c\/span\u003e\u003c\/p\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106942836815,"sku":"INFERNO\/R","price":4157.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/ContainerBridge_1024x1024_2x_bd502ccc-5ec7-4cd2-9bba-8e3af6822b9f.webp?v=1776445363"},{"product_id":"glensound-minferno-single-commentators-box-for-dante-audio-networks","title":"Glensound MINFERNO Single Commentator's Box For Dante Audio Networks","description":"\u003cp\u003eMinFerno is a new, smaller, and even easier to use version of our exceptionally popular Inferno network audio commentary box.\u003c\/p\u003e\n\u003cp\u003eMinFerno is designed for a single commentator\/ announcer to use, and like its big brother the Inferno, it provides the very best possible commentary microphone amplifier and compressor limiter circuit for amazing on air sound.\u003c\/p\u003e\n\u003cp\u003eThe MinFerno is easy to use for commentators who would rather be talking about the game than figuring out how the equipment works.  It is built to our exacting, rugged \u0026amp; robust standard to make it a reliable piece of broadcast equipment for the busy engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRedundant Powering Options\u003c\/strong\u003e \u003cbr\u003eThe MinFerno can be powered from any of 3 different sources:\u003cbr\u003e1) PoE on the Primary CAT5 Network link\u003cbr\u003e2) PoE on the Secondary CAT5 Network link\u003cbr\u003e3) External 12V DC \u003cbr\u003eFour of rear panel LEDs show the availability of the 3 power sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary \u0026amp; Secondary SFP Slots\u003c\/strong\u003e\u003cbr\u003eThe SFP (Small Form-Factor Pluggable) fibre slots are standard networking ports that accept standard SFP modules. This means that you decide what type of fibre and connector style you want to use just by the SFP module that you insert. The primary \u0026amp; secondary network circuits allow for glitch free redundancy across both the Fibre \u0026amp; Copper network interfaces. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePrimary \u0026amp; Secondary Copper Network Connections with PoE\u003c\/strong\u003e \u003cbr\u003eTwo CAT6 connections on Neutrik Ethercons (that accept standard networking cables) are provided to allow copper connections to local network switches to carry the Dante\/ AES67 audio. Two connections are fitted to allow redundant circuits to be used if required.\u003cbr\u003eBoth of these connectors can accept a PoE power source for providing the power to the MinFerno.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Mode \u0026amp; Gain\u003c\/strong\u003e\u003cbr\u003eOne pair of push buttons selects the input type of the front panel XLR to be either microphone, line or microphone with 48V phantom power. 3 LEDs indicate which input mode is selected.\u003cbr\u003eTwo push buttons are used to alter the gain of the input. LEDs indicate if the gain setting is above or below our pre-configured ‘lineup’ levels. The front panel PPM of course provides an accurate indication of the input level.\u003cbr\u003eThe gain can also be altered remotely by a web browser pointing at the MinFerno's web page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUp to 4 of Incoming Audio Volume Controls\u003c\/strong\u003e \u003cbr\u003eOn the top panel are up to 5 rotary headphone volume controls. 4 of these are connected to 4 incoming audio circuits from the Dante\/ AES67 network. These are normally used for such sources as mixed programme or cue, talkback to director, talkback to producer, talkback to engineer etc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSidetone Volume Control\u003c\/strong\u003e\u003cbr\u003eThe 5th front panel rotary headphone volume control is ‘sidetone’. Sidetone is the commentator's own voice in their own ears. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphone Routing\u003c\/strong\u003e \u003cbr\u003eEach of the 5 headphone volume controls has an associated left ear, right ear, both routing switch located next to the volume knob. This single push button switch routes the associated source to just the left, just the right or both channels of the stereo headphone amplifier. \u003cbr\u003eTo enable the commentator to know how they are routing a circuit the first time a routing switch is pressed, a pair of LEDs on the front panel indicate its current routing arrangement. The next time the routing switch is pressed then the next routing option is selected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRobust Mic On and Talkback Buttons\u003c\/strong\u003e\u003cbr\u003eThere are up to 4 of large bright illuminated buttons (1 for programme and up to 3 for talkback). These switches route the outgoing microphone circuit onto up to 4 different Dante\/ AES67 network audio circuits. The operation of these switches (momentary, latching etc) and the interaction of these switches (i.e. pressing a talkback switch mutes the main mic) can be fully configured via the web page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15 segment LED PPM Meter\u003c\/strong\u003e \u003cbr\u003eAudio input level is indicated on the 15 segment PPM meter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Noise Microphone Amplifier With Remote Gain\u003c\/strong\u003e\u003cbr\u003eWe spent a long time optimising the performance of the THAT corporation microphone amplifier used in the original Inferno and used again on the MinFerno. It features very low noise \u0026amp; distortion circuit that we remote control the gain of in 1dB steps, which allows us to provide the remote webpage gain control as well as the rear panel gain push buttons. We also optimised the circuits to allow correct source impedance switching depending on whether the input has been set as a mic or line input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferee Compressor Limiter\u003c\/strong\u003e\u003cbr\u003eAs with all our commentary units, the MinFerno features our very popular Referee compressor limiter circuit. This circuit starts to compress the commentator’s voice gradually and slowly increases the compression ratio as the input level becomes overly high, resulting in a very natural sounding and distortion free audio output capable of taming even the loudest of commentators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Quality Analogue To Digital Converter (ADC)\u003c\/strong\u003e \u003cbr\u003eDante\/ AES67 network audio is a digital circuit and as such the best analogue microphone amplifier would be wasted if we hadn’t paired it up with the best analogue to digital converter. The ADC's job is fairly simple, and if you look at our tech spec you’ll see that we’ve made ours work incredibly well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnique Headphone Amplifiers\u003c\/strong\u003e\u003cbr\u003eThe commentator’s headphones are a vitally important tool so we take as much care with our headphone amplifiers as with our on air microphones. Our unique headphone amplifier provides the correct output level regardless of the impedance of the attached headphones, meaning that broadcasters can now pick and choose between low impedance ‘cheap’ headphones and high impedance traditional broadcast ones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMinFerno Commentator’s Box\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle user Dante commentary box\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSystem is scalable with multiple commentators as part of a Dante network\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan connect to any Dante compatible network\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSingle low noise mic\/line\/48V input \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOur popular Referee compressor\/limiter keeps even the loudest commentator sounding natural\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone mixer has up to 4 inputs supplied from the Dante network, plus the local input (sidetone)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEach headphone input has left\/both\/right headphone switching \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLarge illuminated on air switches\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMultiple power options including PoE, \u0026amp; External DC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNetwork connections on Copper (Cat5) and Fibre (SFP slots)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrimary \u0026amp; Secondary network connections allowing completely transparent network redundancy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLarge bright PPM level meter\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInbuilt web server for setup and remote control via web browser of mic gain \u0026amp; mic on\/off switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDANTE® Audio Network\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAES67 Compliant\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMulti channel, digital media network technology\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOffers compatibility with hundreds of systems from other manufacturers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eScalable from a pair up to thousands of channels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFully redundant glitch free audio transport\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasy, reliable \u0026amp; free routing software for point to point, or point to multipoint audio routes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks across standard network switches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO INPUT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Type: Neutrik 3 pin XLR\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput Impedance: Mic: 2k4\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine 100k\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: 127dBu (22Hz-22KHz) RMS A weighted Terminated with 300 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency response:  Mic -2dBu @25Hz flat @50Hz till 22kHz (+\/- 0.25dBu).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine flat till 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDistortion at +8dBu:  100Hz = 0.023%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1kHz =0.012%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10kHz = 0.014%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine Up Gains: Dynamic Mic: 58dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic + Phantom Power: 35dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: 0dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGain Range: Mic: -30 to +15dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: +\/-15dB \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax Input Before Clipping (@line up):  Dynamic Mic: +10dBU,\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic+phantom: +18dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: +18dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeadphone Impedance: 16-1000 Ohm (auto output level to match impedance)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Noise:  -76.6dB @ line up (residual noise)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Frequency Response:  \u0026gt;-0.1dB 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone THD + Noise (Ref +8dB): 0.008% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnection: 6.35mm \u0026amp; 3.5mm stereo jack plugs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Volume Pot Range: +10dB to Off (can be configured +10dB to -30dB)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Headphone Output: +16.8dB into 600 Ohms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoE: Can be powered by PoE on either Copper network interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePoE: Complies to IEEE 802.3af-2003 classification class 0\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC Input: 2.5mm Barrel, Centre +Ve, 9 - 15 Volts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption: Front Panel Power On LED: Bright Blue\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRear Panel Power On Indicators: 1 green LED showing presence of each of the above power sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 144 x 179 x 76mm (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 1.01Kg (2lb3oz)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMechanics: All aluminium construction, anodised and laser etched, powder coated sides\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Carton: Rugged Export Quality cardboard carton 610 x 420 x 170mm (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 2.5kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: 0 to +50°C (32 to 122°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70°C (-4 to 158°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 0 to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook: A4 handbook can be downloaded\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMains Cable: UK \u0026amp; EU only, 2 metre mains plug to IEC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable: 1 of 2 Metre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOPTIONAL ITEMS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarrying Case: Polypropylene Carrying Case\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSFP Fibre Modules: Multi Mode, Single Mode and Bi-directional on single Fibre available\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExternal DC Power Supply: Switch mode (100 - 250VAC) desktop style with IEC mains input \u0026amp; 1.5 metre DC output cable  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK OPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDANTE\/AES67 VERSION\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSample Frequency: 48K\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution: 24 Bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; Routing: Via Free Dante Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Can be configured for AES67\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRAVENNA\/AES67 VERSION\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Sample Rates: 44.1kHz - 192kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePTPv2: Master or Slave, IEEE-1588-2008 standard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST 2110-30: Yes. Including level C and CX\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST2022-7: Yes. Seamless data switching\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNMOS IS-04 (Disovery): Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNMOS IS-05 Routing): Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemote Control: Web browser or Anem\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106959286351,"sku":"MINFERNO","price":2955.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_716b1ac9-f49f-4ee4-9f5b-f6b553fa7c69.jpg?v=1776446226"},{"product_id":"glensound-minferno-1-single-commentators-box-for-dante-audio-networks","title":"Glensound MINFERNO\/1 Single Commentator's Box For Dante Audio Networks","description":"\u003cp\u003eMinFerno is a new, smaller, and even easier to use version of our exceptionally popular Inferno network audio commentary box.\u003c\/p\u003e\n\u003cp\u003eMinFerno is designed for a single commentator\/ announcer to use, and like its big brother the Inferno, it provides the very best possible commentary microphone amplifier and compressor limiter circuit for amazing on air sound.\u003c\/p\u003e\n\u003cp\u003eThe MinFerno is easy to use for commentators who would rather be talking about the game than figuring out how the equipment works.  It is built to our exacting, rugged \u0026amp; robust standard to make it a reliable piece of broadcast equipment for the busy engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRedundant Powering Options\u003c\/strong\u003e \u003cbr\u003eThe MinFerno can be powered from any of 3 different sources:\u003cbr\u003e1) PoE on the Primary CAT5 Network link\u003cbr\u003e2) PoE on the Secondary CAT5 Network link\u003cbr\u003e3) External 12V DC \u003cbr\u003eFour off rear panel LEDs show the availability of the 3 power sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary \u0026amp; Secondary SFP Slots\u003c\/strong\u003e\u003cbr\u003eThe SFP (Small Form-Factor Pluggable) fibre slots are standard networking ports that accept standard SFP modules. This means that you decide what type of fibre and connector style you want to use just by the SFP module that you insert. The primary \u0026amp; secondary network circuits allow for glitch free redundancy across both the Fibre \u0026amp; Copper network interfaces. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePrimary \u0026amp; Secondary Copper Network Connections with PoE\u003c\/strong\u003e \u003cbr\u003eTwo CAT6 connections on Neutrik Ethercons (that accept standard networking cables) are provided to allow copper connections to local network switches to carry the Dante\/ AES67 audio. Two connections are fitted to allow redundant circuits to be used if required.\u003cbr\u003eBoth of these connectors can accept a PoE power source for providing the power to the MinFerno.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Mode \u0026amp; Gain\u003c\/strong\u003e\u003cbr\u003eOne pair of push buttons selects the input type of the front panel XLR to be either microphone, line or microphone with 48V phantom power. 3 LEDs indicate which input mode is selected.\u003cbr\u003eTwo push buttons are used to alter the gain of the input. LEDs indicate if the gain setting is above or below our pre-configured ‘lineup’ levels. The front panel PPM of course provides an accurate indication of the input level.\u003cbr\u003eThe gain can also be altered remotely by a web browser pointing at the MinFerno's web page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUp to 4 off Incoming Audio Volume Controls\u003c\/strong\u003e \u003cbr\u003eOn the top panel are up to 5 rotary headphone volume controls. 4 of these are connected to 4 incoming audio circuits from the Dante\/ AES67 network. These are normally used for such sources as mixed programme or cue, talkback to director, talkback to producer, talkback to engineer etc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSidetone Volume Control\u003c\/strong\u003e\u003cbr\u003eThe 5th front panel rotary headphone volume control is ‘sidetone’. Sidetone is the commentator's own voice in their own ears. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphone Routing\u003c\/strong\u003e \u003cbr\u003eEach of the 5 headphone volume controls has an associated left ear, right ear, both routing switch located next to the volume knob. This single push button switch routes the associated source to just the left, just the right or both channels of the stereo headphone amplifier. \u003cbr\u003eTo enable the commentator to know how they are routing a circuit the first time a routing switch is pressed, a pair of LEDs on the front panel indicate its current routing arrangement. The next time the routing switch is pressed then the next routing option is selected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRobust Mic On and Talkback Buttons\u003c\/strong\u003e\u003cbr\u003eThere are up to 4 off large bright illuminated buttons (1 for programme and up to 3 for talkback). These switches route the outgoing microphone circuit onto up to 4 different Dante\/ AES67 network audio circuits. The operation of these switches (momentary, latching etc) and the interaction of these switches (i.e. pressing a talkback switch mutes the main mic) can be fully configured via the web page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15 segment LED PPM Meter\u003c\/strong\u003e \u003cbr\u003eAudio input level is indicated on the 15 segment PPM meter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Noise Microphone Amplifier With Remote Gain\u003c\/strong\u003e\u003cbr\u003eWe spent a long time optimising the performance of the THAT corporation microphone amplifier used in the original Inferno and used again on the MinFerno. It features very low noise \u0026amp; distortion circuit that we remote control the gain of in 1dB steps, which allows us to provide the remote webpage gain control as well as the rear panel gain push buttons. We also optimised the circuits to allow correct source impedance switching depending on whether the input has been set as a mic or line input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferee Compressor Limiter\u003c\/strong\u003e\u003cbr\u003eAs with all our commentary units, the MinFerno features our very popular Referee compressor limiter circuit. This circuit starts to compress the commentator’s voice gradually and slowly increases the compression ratio as the input level becomes overly high, resulting in a very natural sounding and distortion free audio output capable of taming even the loudest of commentators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Quality Analogue To Digital Converter (ADC)\u003c\/strong\u003e \u003cbr\u003eDante\/ AES67 network audio is a digital circuit and as such the best analogue microphone amplifier would be wasted if we hadn’t paired it up with the best analogue to digital converter. The ADC's job is fairly simple, and if you look at our tech spec you’ll see that we’ve made ours work incredibly well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnique Headphone Amplifiers\u003c\/strong\u003e\u003cbr\u003eThe commentator’s headphones are a vitally important tool so we take as much care with our headphone amplifiers as with our on air microphones. Our unique headphone amplifier provides the correct output level regardless of the impedance of the attached headphones, meaning that broadcasters can now pick and choose between low impedance ‘cheap’ headphones and high impedance traditional broadcast ones. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMinFerno Commentator’s Box\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle user Dante commentary box. System is scalable with multiple commentators as part of a Dante network\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan connect to any Dante compatible network\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSingle low noise mic\/line\/48V input \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOur popular Referee compressor\/limiter keeps even the loudest commentator sounding natural\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone mixer has up to 4 inputs supplied from the Dante network, plus the local input (sidetone)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEach headphone input has left\/both\/right headphone switching \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUp to 3 talkback circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLarge illuminated on air and talkback switches\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMultiple power options including PoE, \u0026amp; External DC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNetwork connections on Copper (Cat5) and Fibre (SFP slots)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrimary \u0026amp; Secondary network connections allowing completely transparent network redundancy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLarge bright PPM level meter\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInbuilt web server for setup and remote control via web browser of mic gain \u0026amp; mic on\/off switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDANTE® Audio Network\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAES67 Compliant\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMulti channel, digital media network technology\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOffers compatibility with hundreds of systems from other manufacturers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eScalable from a pair up to thousands of channels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFully redundant glitch free audio transport\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasy, reliable \u0026amp; free routing software for point to point, or point to multipoint audio routes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks across standard network switches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO INPUT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Type: Neutrik 3 pin XLR\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput Impedance: Mic: 2k4\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine 100k\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: 127dBu (22Hz-22kHz) RMS A weighted Terminated with 300 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency response:  Mic -2dBu @25Hz flat @50Hz till 22kHz (+\/- 0.25dBu).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine flat till 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDistortion at +8dBu:  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100Hz = 0.023%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1kHz =0.012%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10kHz = 0.014%\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLine Up Gains:            \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDynamic Mic: 58dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic + Phantom Power: 35dB\u003c\/li\u003e\n\u003cli\u003eLine: 0dB\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGain Range:                \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic: -30 to +15dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: +\/-15dB \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMax Input Before Clipping (@line up): \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Mic: +10dBU,\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic+phantom: +18dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: +18dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeadphone Impedance: 16-1000 Ohm (auto output level to match impedance)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Noise:  -76.6dB @ line up (residual noise)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Frequency Response:  \u0026gt;-0.1dB 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone THD + Noise (Ref +8dB): 0.008% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnection: 6.35mm \u0026amp; 3.5mm stereo jack plugs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Volume Pot Range: +10dB to Off (can be configured +10dB to -30dB)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Headphone Output: +16.8dB into 600 Ohms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoE: Can be powered by PoE on either Copper network interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePoE: Complies to IEEE 802.3af-2003 classification class 0\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC Input: 2.5mm Barrel, Centre +Ve, 9 - 15 Volts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption: Front Panel Power On LED: Bright Blue\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRear Panel Power On Indicators: 1 green LED showing presence of each of the above power sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 144 x 179 x 76mm (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 1.01Kg (2lb3oz)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMechanics: All aluminium construction, anodised and laser etched, powder coated sides\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Carton: Rugged Export Quality cardboard carton 610 x 420 x 170mm (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 2.5kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: 0 to +50°C (32 to 122°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70°C (-4 to 158°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 0 to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook: A4 handbook can be downloaded\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMains Cable: UK \u0026amp; EU only, 2 metre mains plug to IEC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable: 1 of 2 Metre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOPTIONAL ITEMS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarrying Case: Polypropylene Carrying Case\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSFP Fibre Modules: Multi Mode, Single Mode and Bi-directional on single Fibre available\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExternal DC Power Supply: Switch mode (100 - 250VAC) desktop style with IEC mains input \u0026amp; 1.5 metre DC output cable \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK OPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDANTE\/AES67 VERSION\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSample Frequency: 48K\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution: 24 Bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; Routing: Via Free Dante Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Can be configured for AES67\u003c\/li\u003e\n\u003cli\u003eRAVENNA\/AES67 VERSION\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Sample Rates: 44.1kHz - 192kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePTPv2: Master or Slave, IEEE-1588-2008 standard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST 2110-30: Yes. Including level C and CX\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST2022-7: Yes. Seamless data switching\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNMOS IS-04 (Disovery): Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNMOS IS-05 Routing): Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemote Control: Web browser or Anem\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45106975080527,"sku":"MINFERNO\/1","price":3115.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_5b2e1d54-6561-41c5-a77a-a07096560714.jpg?v=1776447066"},{"product_id":"glensound-minferno-1-talkback-microphone-output","title":"Glensound MINFERNO\/1+ Talkback Microphone Output","description":"\u003cp\u003e\u003cspan dir=\"auto\"\u003eMINFERNO\/1+\u003c\/span\u003e\u003cspan dir=\"auto\"\u003e\u003cspan\u003e \u003c\/span\u003eis a smaller and even easier-to-use version of the AoIP Dante INFERNO commentator console. It features one talkback circuit and a switched analog output from the microphone input on the rear panel for redundancy in case of network failure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan dir=\"auto\"\u003eFeatures\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eCompact\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003e1 user\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003e1 talkback\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eAnalog microphone output\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan dir=\"auto\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan dir=\"auto\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cspan dir=\"auto\"\u003eDante®: \u003c\/span\u003e\u003cspan dir=\"auto\"\u003eYes\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eConnection Type: Copper\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003e\u003cstrong\u003eFiber\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eNumber of Commenters: 1\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eNumber of Talkback(s): 1\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eNumber of Headphone Outputs: 2\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003e\u003cstrong\u003eRedundancy\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eDante: Headphone Plug Type\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003e3.5mm jack: 6.35mm jack\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003e(LxWxH): 144 x 179 x 76mm\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eWeight: 1.01kg\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eMicrophone output(s): 1 XLR 3-pin\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45107034521679,"sku":"MINFERNO\/1+","price":3260.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/minferno1plus.png?v=1776447845"},{"product_id":"glensound-minferno-2-single-commentators-box-for-dante-audio-networks","title":"Glensound MINFERNO\/2 Single Commentator's Box For Dante Audio Networks","description":"\u003cp\u003eMinFerno is a new, smaller, and even easier to use version of our exceptionally popular Inferno network audio commentary box.\u003c\/p\u003e\n\u003cp\u003eMinFerno is designed for a single commentator\/ announcer to use, and like its big brother the Inferno, it provides the very best possible commentary microphone amplifier and compressor limiter circuit for amazing on air sound.\u003c\/p\u003e\n\u003cp\u003eThe MinFerno is easy to use for commentators who would rather be talking about the game than figuring out how the equipment works.  It is built to our exacting, rugged \u0026amp; robust standard to make it a reliable piece of broadcast equipment for the busy engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRedundant Powering Options\u003c\/strong\u003e \u003cbr\u003eThe MinFerno can be powered from any of 3 different sources:\u003cbr\u003e1) PoE on the Primary CAT5 Network link\u003cbr\u003e2) PoE on the Secondary CAT5 Network link\u003cbr\u003e3) External 12V DC \u003cbr\u003eFour of rear panel LEDs show the availability of the 3 power sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary \u0026amp; Secondary SFP Slots\u003c\/strong\u003e\u003cbr\u003eThe SFP (Small Form-Factor Pluggable) fibre slots are standard networking ports that accept standard SFP modules. This means that you decide what type of fibre and connector style you want to use just by the SFP module that you insert. The primary \u0026amp; secondary network circuits allow for glitch free redundancy across both the Fibre \u0026amp; Copper network interfaces. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePrimary \u0026amp; Secondary Copper Network Connections with PoE\u003c\/strong\u003e \u003cbr\u003eTwo CAT6 connections on Neutrik Ethercons (that accept standard networking cables) are provided to allow copper connections to local network switches to carry the Dante\/ AES67 audio. Two connections are fitted to allow redundant circuits to be used if required.\u003cbr\u003eBoth of these connectors can accept a PoE power source for providing the power to the MinFerno.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Mode \u0026amp; Gain\u003c\/strong\u003e\u003cbr\u003eOne pair of push buttons selects the input type of the front panel XLR to be either microphone, line or microphone with 48V phantom power. 3 LEDs indicate which input mode is selected.\u003cbr\u003eTwo push buttons are used to alter the gain of the input. LEDs indicate if the gain setting is above or below our pre-configured ‘lineup’ levels. The front panel PPM of course provides an accurate indication of the input level.\u003cbr\u003eThe gain can also be altered remotely by a web browser pointing at the MinFerno's web page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUp to 4 of Incoming Audio Volume Controls\u003c\/strong\u003e \u003cbr\u003eOn the top panel are up to 5 rotary headphone volume controls. 4 of these are connected to 4 incoming audio circuits from the Dante\/ AES67 network. These are normally used for such sources as mixed programme or cue, talkback to director, talkback to producer, talkback to engineer etc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSidetone Volume Control\u003c\/strong\u003e\u003cbr\u003eThe 5th front panel rotary headphone volume control is ‘sidetone’. Sidetone is the commentator's own voice in their own ears. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphone Routing\u003c\/strong\u003e \u003cbr\u003eEach of the 5 headphone volume controls has an associated left ear, right ear, both routing switch located next to the volume knob. This single push button switch routes the associated source to just the left, just the right or both channels of the stereo headphone amplifier. \u003cbr\u003eTo enable the commentator to know how they are routing a circuit the first time a routing switch is pressed, a pair of LEDs on the front panel indicate its current routing arrangement. The next time the routing switch is pressed then the next routing option is selected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRobust Mic On and Talkback Buttons\u003c\/strong\u003e\u003cbr\u003eThere are up to 4 of large bright illuminated buttons (1 for programme and up to 3 for talkback). These switches route the outgoing microphone circuit onto up to 4 different Dante\/ AES67 network audio circuits. The operation of these switches (momentary, latching etc) and the interaction of these switches (i.e. pressing a talkback switch mutes the main mic) can be fully configured via the web page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15 segment LED PPM Meter\u003c\/strong\u003e \u003cbr\u003eAudio input level is indicated on the 15 segment PPM meter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Noise Microphone Amplifier With Remote Gain\u003c\/strong\u003e\u003cbr\u003eWe spent a long time optimising the performance of the THAT corporation microphone amplifier used in the original Inferno and used again on the MinFerno. It features very low noise \u0026amp; distortion circuit that we remote control the gain of in 1dB steps, which allows us to provide the remote webpage gain control as well as the rear panel gain push buttons. We also optimised the circuits to allow correct source impedance switching depending on whether the input has been set as a mic or line input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferee Compressor Limiter\u003c\/strong\u003e\u003cbr\u003eAs with all our commentary units, the MinFerno features our very popular Referee compressor limiter circuit. This circuit starts to compress the commentator’s voice gradually and slowly increases the compression ratio as the input level becomes overly high, resulting in a very natural sounding and distortion free audio output capable of taming even the loudest of commentators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Quality Analogue To Digital Converter (ADC)\u003c\/strong\u003e \u003cbr\u003eDante\/ AES67 network audio is a digital circuit and as such the best analogue microphone amplifier would be wasted if we hadn’t paired it up with the best analogue to digital converter. The ADC's job is fairly simple, and if you look at our tech spec you’ll see that we’ve made ours work incredibly well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnique Headphone Amplifiers\u003c\/strong\u003e\u003cbr\u003eThe commentator’s headphones are a vitally important tool so we take as much care with our headphone amplifiers as with our on air microphones. Our unique headphone amplifier provides the correct output level regardless of the impedance of the attached headphones, meaning that broadcasters can now pick and choose between low impedance ‘cheap’ headphones and high impedance traditional broadcast ones. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMinFerno Commentator’s Box\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle user Dante commentary box System is scalable with multiple commentators as part of a Dante network.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan connect to any Dante compatible network Single low noise mic\/line\/48V input\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOur popular Referee compressor\/limiter keeps even the loudest commentator sounding natural\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone mixer has up to 4 inputs supplied from the Dante network, plus the local input (sidetone)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEach headphone input has left\/both\/right headphone switching\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUp to 3 talkback circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLarge illuminated on air and talkback switches\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMultiple power options including PoE, \u0026amp; External DC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNetwork connections on Copper (Cat5) and Fibre (SFP slots)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrimary \u0026amp; Secondary network connections allowing completely transparent network redundancy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLarge bright PPM level meter\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInbuilt web server for setup and remote control via web browser of mic gain \u0026amp; mic on\/off switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDANTE® Audio Network\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAES67 Compliant\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMulti channel, digital media network technology\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOffers compatibility with hundreds of systems from other manufacturers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eScalable from a pair up to thousands of channels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFully redundant glitch free audio transport\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasy, reliable \u0026amp; free routing software for point to point, or point to multipoint audio routes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks across standard network switches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRAVENNA\/AES67 VERSION\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Sample Rates: 44.1kHz - 192kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePTPv2: Master or Slave, IEEE-1588-2008 standard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST 2110-30: Yes. Including level C and CX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO INPUT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Type: Neutrik 3 pin XLR\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInput Impedance: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic: 2k4\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine 100k\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: 127dBu (22Hz-22KHz) RMS A weighted Terminated with 300 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency response:  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic -2dBu @25Hz flat @50Hz till 22kHz (+\/- 0.25dBu).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine flat till 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDistortion at +8dBu:  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100Hz = 0.023%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1kHz =0.012%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10kHz = 0.014%\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLine Up Gains:            \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Mic: 58dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic + Phantom Power: 35dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: 0dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGain Range:               \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic: -30 to +15dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: +\/-15dB \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMax Input Before Clipping (@line up): \u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDynamic Mic: +10dBU,\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic+phantom: +18dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: +18dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeadphone Impedance: 16-1000 Ohms (auto output level to match impedance)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Noise:  -76.6dB @ line up (residual noise)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Frequency Response:  \u0026gt;-0.1dB 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone THD + Noise (Ref +8dB): 0.008% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnection: 6.35mm \u0026amp; 3.5mm stereo jack plugs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Volume Pot Range: +10dB to Off (can be configured +10dB to -30dB)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Headphone Output: +16.8dB into 600 Ohms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoE: Can be powered by PoE on either Copper network interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePoE: Complies to IEEE 802.3af-2003 classification class 0\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC Input: 2.5mm Barrel, Centre +Ve, 9 - 15 Volts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption: Front Panel Power On LED: Bright Blue\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRear Panel Power On Indicators: 1 green LED showing presence of each of the above power sources\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize: 144 x 179 x 76mm (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 1.01Kg (2lb3oz)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMechanics: All aluminium construction, anodised and laser etched, powder coated sides\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Carton: Rugged Export Quality cardboard carton 610 x 420 x 170mm (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 2.5kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: 0 to +50°C (32 to 122°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70°C (-4 to 158°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 0 to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook: Handbook can be downloaded\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMains Cable: UK \u0026amp; EU only, 2 metre mains plug to IEC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable: 1 of 2 Metre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOPTIONAL ITEMS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarrying Case: Polypropylene Carrying Case\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSFP Fibre Modules: Multi Mode, Single Mode and Bi-directional on single Fibre available\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExternal DC Power Supply: Switch mode (100 - 250VAC) desktop style with IEC mains input \u0026amp; 1.5 metre DC output cable  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK OPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDANTE\/AES67 VERSION\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSample Frequency: 48K\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution: 24 Bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; Routing: Via Free Dante Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Can be configured for AES67\u003c\/li\u003e\n\u003cli\u003eRAVENNA\/AES67 VERSION\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Sample Rates: 44.1kHz - 192kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePTPv2: Master or Slave, IEEE-1588-2008 standard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST 2110-30: Yes. Including level C and CX\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45107135217743,"sku":"MINFERNO\/2","price":3260.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_a42fe3ad-c20f-449c-83be-c5d6bdc7678a.jpg?v=1776449214"},{"product_id":"glensound-minferno-2-talkbacks-2-microphone-output","title":"Glensound MINFERNO\/2+ Talkbacks 2 Microphone Output","description":"\u003cp\u003e\u003cspan dir=\"auto\"\u003eMINFERNO\/2+\u003c\/span\u003e\u003cspan dir=\"auto\"\u003e\u003cspan\u003e \u003c\/span\u003eis a smaller and even easier-to-use version of the AoIP Dante INFERNO commentator console. It features two talkback circuits and a switched analog output from the microphone input on the rear panel for redundancy in case of network failure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan dir=\"auto\"\u003eFeatures\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eCompact\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003e1 user\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003e2 talkbacks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eAnalog microphone output\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan dir=\"auto\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eDante®: Yes\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eConnection Type: Copper\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003e\u003cstrong\u003eFiber\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eNumber of Commenters: 1\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eNumber of Talkback(s): 2\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eNumber of Headphone Outputs: 2\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eRedundancy: Dante\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eHeadphone Plug Type: 3.5mm jack\/6.35mm jack\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003e(LxWxH): 144 x 179 x 76mm\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eWeight: 1.01kg\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan dir=\"auto\"\u003eMicrophone output(s): 1 XLR 3-pin\u003c\/span\u003e\u003cspan dir=\"auto\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45107247284303,"sku":"MINFERNO\/2+","price":3418.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/minferno2plus.png?v=1776453826"},{"product_id":"glensound-minferno-3-single-commentators-box-for-dante-audio-networks","title":"Glensound MINFERNO\/3 Single Commentator's Box For Dante Audio Networks","description":"\u003cp\u003eMinFerno is a new, smaller, and even easier to use version of our exceptionally popular Inferno network audio commentary box.\u003c\/p\u003e\n\u003cp\u003eMinFerno is designed for a single commentator\/ announcer to use, and like its big brother the Inferno, it provides the very best possible commentary microphone amplifier and compressor limiter circuit for amazing on air sound.\u003c\/p\u003e\n\u003cp\u003eThe MinFerno is easy to use for commentators who would rather be talking about the game than figuring out how the equipment works.  It is built to our exacting, rugged \u0026amp; robust standard to make it a reliable piece of broadcast equipment for the busy engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRedundant Powering Options\u003c\/strong\u003e \u003cbr\u003eThe MinFerno can be powered from any of 3 different sources:\u003cbr\u003e1) PoE on the Primary CAT5 Network link\u003cbr\u003e2) PoE on the Secondary CAT5 Network link\u003cbr\u003e3) External 12V DC\u003cbr\u003eFour of rear panel LEDs show the availability of the 3 power sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary \u0026amp; Secondary SFP Slots\u003c\/strong\u003e\u003cbr\u003eThe SFP (Small Form-Factor Pluggable) fibre slots are standard networking ports that accept standard SFP modules. This means that you decide what type of fibre and connector style you want to use just by the SFP module that you insert. The primary \u0026amp; secondary network circuits allow for glitch free redundancy across both the Fibre \u0026amp; Copper network interfaces. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePrimary \u0026amp; Secondary Copper Network Connections with PoE\u003c\/strong\u003e \u003cbr\u003eTwo CAT6 connections on Neutrik Ethercons (that accept standard networking cables) are provided to allow copper connections to local network switches to carry the Dante\/ AES67 audio. Two connections are fitted to allow redundant circuits to be used if required.\u003cbr\u003eBoth of these connectors can accept a PoE power source for providing the power to the MinFerno.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Mode \u0026amp; Gain\u003c\/strong\u003e\u003cbr\u003eOne pair of push buttons selects the input type of the front panel XLR to be either microphone, line or microphone with 48V phantom power. 3 LEDs indicate which input mode is selected.\u003cbr\u003eTwo push buttons are used to alter the gain of the input. LEDs indicate if the gain setting is above or below our pre-configured ‘lineup’ levels. The front panel PPM of course provides an accurate indication of the input level.\u003cbr\u003eThe gain can also be altered remotely by a web browser pointing at the MinFerno's web page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUp to 4 of Incoming Audio Volume Controls\u003c\/strong\u003e \u003cbr\u003eOn the top panel are up to 5 rotary headphone volume controls. 4 of these are connected to 4 incoming audio circuits from the Dante\/ AES67 network. These are normally used for such sources as mixed programme or cue, talkback to director, talkback to producer, talkback to engineer etc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSidetone Volume Control\u003c\/strong\u003e\u003cbr\u003eThe 5th front panel rotary headphone volume control is ‘sidetone’. Sidetone is the commentator's own voice in their own ears. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphone Routing\u003c\/strong\u003e \u003cbr\u003eEach of the 5 headphone volume controls has an associated left ear, right ear, both routing switch located next to the volume knob. This single push button switch routes the associated source to just the left, just the right or both channels of the stereo headphone amplifier. \u003cbr\u003eTo enable the commentator to know how they are routing a circuit the first time a routing switch is pressed, a pair of LEDs on the front panel indicate its current routing arrangement. The next time the routing switch is pressed then the next routing option is selected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRobust Mic On and Talkback Buttons\u003c\/strong\u003e\u003cbr\u003eThere are up to 4 of large bright illuminated buttons (1 for programme and up to 3 for talkback). These switches route the outgoing microphone circuit onto up to 4 different Dante\/ AES67 network audio circuits. The operation of these switches (momentary, latching etc) and the interaction of these switches (i.e. pressing a talkback switch mutes the main mic) can be fully configured via the web page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15 segment LED PPM Meter\u003c\/strong\u003e \u003cbr\u003eAudio input level is indicated on the 15 segment PPM meter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Noise Microphone Amplifier With Remote Gain\u003c\/strong\u003e\u003cbr\u003eWe spent a long time optimising the performance of the THAT corporation microphone amplifier used in the original Inferno and used again on the MinFerno. It features very low noise \u0026amp; distortion circuit that we remote control the gain of in 1dB steps, which allows us to provide the remote webpage gain control as well as the rear panel gain push buttons. We also optimised the circuits to allow correct source impedance switching depending on whether the input has been set as a mic or line input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferee Compressor Limiter\u003c\/strong\u003e\u003cbr\u003eAs with all our commentary units, the MinFerno features our very popular Referee compressor limiter circuit. This circuit starts to compress the commentator’s voice gradually and slowly increases the compression ratio as the input level becomes overly high, resulting in a very natural sounding and distortion free audio output capable of taming even the loudest of commentators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Quality Analogue To Digital Converter (ADC)\u003c\/strong\u003e \u003cbr\u003eDante\/ AES67 network audio is a digital circuit and as such the best analogue microphone amplifier would be wasted if we hadn’t paired it up with the best analogue to digital converter. The ADC's job is fairly simple, and if you look at our tech spec you’ll see that we’ve made ours work incredibly well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnique Headphone Amplifiers\u003c\/strong\u003e\u003cbr\u003eThe commentator’s headphones are a vitally important tool so we take as much care with our headphone amplifiers as with our on air microphones. Our unique headphone amplifier provides the correct output level regardless of the impedance of the attached headphones, meaning that broadcasters can now pick and choose between low impedance ‘cheap’ headphones and high impedance traditional broadcast ones. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMinFerno Commentator’s Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle user Dante commentary box\u003c\/li\u003e\n\u003cli\u003eSystem is scalable with multiple commentators as part of a Dante network\u003c\/li\u003e\n\u003cli\u003eCan connect to any Dante compatible network\u003c\/li\u003e\n\u003cli\u003eSingle low noise mic\/line\/48V input\u003c\/li\u003e\n\u003cli\u003eOur popular Referee compressor\/limiter keeps even the loudest commentator sounding natural\u003c\/li\u003e\n\u003cli\u003eHeadphone mixer has up to 4 inputs supplied from the Dante network, plus the local input (sidetone)\u003c\/li\u003e\n\u003cli\u003eEach headphone input has left\/both\/right headphone switching\u003c\/li\u003e\n\u003cli\u003eUp to 3 talkback circuits\u003c\/li\u003e\n\u003cli\u003eLarge illuminated on air and talkback switches\u003c\/li\u003e\n\u003cli\u003eMultiple power options including PoE, \u0026amp; External DC\u003c\/li\u003e\n\u003cli\u003eNetwork connections on Copper (Cat5) and Fibre (SFP slots)\u003c\/li\u003e\n\u003cli\u003ePrimary \u0026amp; Secondary network connections allowing completely transparent network redundancy\u003c\/li\u003e\n\u003cli\u003eLarge bright PPM level meter\u003c\/li\u003e\n\u003cli\u003eInbuilt web server for setup and remote control via web browser of mic gain \u0026amp; mic on\/off switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eDANTE® Audio Network\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAES67 Compliant\u003c\/li\u003e\n\u003cli\u003eMulti channel, digital media network technology\u003c\/li\u003e\n\u003cli\u003eOffers compatibility with hundreds of systems from other manufacturers\u003c\/li\u003e\n\u003cli\u003eScalable from a pair up to thousands of channels\u003c\/li\u003e\n\u003cli\u003eFully redundant glitch free audio transport\u003c\/li\u003e\n\u003cli\u003eEasy, reliable \u0026amp; free routing software for point to point, or point to multipoint audio routes\u003c\/li\u003e\n\u003cli\u003eWorks across standard network switches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO INPUT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Type: Neutrik 3 pin XLR\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInput Impedance: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic: 2k4\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine 100k\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: 127dBu (22Hz-22KHz) RMS A weighted Terminated with 300 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency response:  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic -2dBu @25Hz flat @50Hz till 22kHz (+\/- 0.25dBu).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine flat till 22kHz\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDistortion at +8dBu:  \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e100Hz = 0.023%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1kHz =0.012%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10kHz = 0.014%\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLine Up Gains:            \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDynamic Mic: 58dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic + Phantom Power: 35dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: 0dB\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGain Range:                \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic: -30 to +15dB\u003c\/li\u003e\n\u003cli\u003eLine: +\/-15dB \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMax Input Before Clipping (@line up): \u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDynamic Mic: +10dBU,\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic+phantom: +18dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: +18dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeadphone Impedance: 16-1000 Ohms (auto output level to match impedance)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Noise:  -76.6dB @ line up (residual noise)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Frequency Response:  \u0026gt;-0.1dB 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone THD + Noise (Ref +8dB): 0.008% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnection: 6.35mm \u0026amp; 3.5mm stereo jack plugs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Volume Pot Range: +10dB to Off (can be configured +10dB to -30dB)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Headphone Output: +16.8dB into 600 Ohms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoE: Can be powered by PoE on either Copper network interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePoE: Complies to IEEE 802.3af-2003 classification class 0\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC Input: 2.5mm Barrel, Centre +Ve, 9 - 15 Volts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption: Front Panel Power On LED: Bright Blue\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRear Panel Power On Indicators: 1 green LED showing presence of each of the above power sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 144 x 179 x 76mm (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 1.01Kg (2lb3oz)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMechanics: All aluminium construction, anodised and laser etched, powder coated sides\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Carton: Rugged Export Quality cardboard carton 610 x 420 x 170mm (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 2.5kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: 0 to +50°C (32 to 122°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70°C (-4 to 158°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 0 to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook: Handbook can be downloaded\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMains Cable: UK \u0026amp; EU only, 2 metre mains plug to IEC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable: 1 of 2 Metre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOPTIONAL ITEMS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarrying Case: Polypropylene Carrying Case\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSFP Fibre Modules: Multi Mode, Single Mode and Bi-directional on single Fibre available\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExternal DC Power Supply: Switch mode (100 - 250VAC) desktop style with IEC mains input \u0026amp; 1.5 metre DC output cable  \u003c\/li\u003e\n\u003cli\u003eDANTE\/AES67 VERSION\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSample Frequency: 48K\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution: 24 Bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; Routing: Via Free Dante Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Can be configured for AES67\u003c\/li\u003e\n\u003cli\u003eRAVENNA\/AES67 VERSION\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Sample Rates: 44.1kHz - 192kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePTPv2: Master or Slave, IEEE-1588-2008 standard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST 2110-30: Yes. Including level C and CX\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45107254493263,"sku":"MINFERNO\/3","price":3418.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_b7bda16a-15e6-4310-8f46-009ec69e66cf.jpg?v=1776454565"},{"product_id":"glensound-minferno-3-talkbacks-2-microphone-output","title":"Glensound MINFERNO\/3+ Talkbacks 2 Microphone Output","description":"\u003cp\u003e\u003cspan dir=\"auto\"\u003eMINFERNO\/3+\u003c\/span\u003e\u003cspan dir=\"auto\"\u003e\u003cspan\u003e \u003c\/span\u003eis a smaller and even easier-to-use version of the AoIP Dante INFERNO commentator console. It features three talkback circuits and a switched analog output from the microphone input on the rear panel for redundancy in case of network failure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan dir=\"auto\"\u003eFeatures\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eCompact\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003e1 user\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003e3 talkbacks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eAnalog microphone output\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan dir=\"auto\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eDante®: Yes\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eConnection Type: Copper\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003e\u003cstrong\u003eFiber\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eNumber of Commenters: 1\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eNumber of Talkback(s): 3\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eNumber of Headphone Outputs: 2\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eRedundancy: Dante\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eHeadphone Plug Type: 3.5mm jack\/6.35mm jack\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003e(LxWxH): 144 x 179 x 76mm\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eWeight: 1.01kg\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan dir=\"auto\"\u003eMicrophone output(s): 1 XLR 3-pin\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45107286966351,"sku":"MINFERNO\/3+","price":3566.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/minferno3plus.png?v=1776455468"},{"product_id":"glensound-inferno-carrying-case-polypropylene-carrying-case","title":"Glensound INFERNO CARRYING CASE Polypropylene Carrying Case","description":"\u003cdiv class=\"col-form_id-form_4666379129988496 col-md-12 col-lg-12 col-xl-12 col-sm-12 col-xs-12 col-sp-12\"\u003e\n\u003cdiv class=\"product-tabs tabs\"\u003e\n\u003cdiv class=\"tab-content\" id=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane fade active in\" id=\"description\" role=\"tabpanel\" aria-expanded=\"true\"\u003e\n\u003cdiv class=\"product-description\"\u003eIntroducing the Glensound INFERNO CARRYING CASE, a durable and reliable solution for transporting your valuable equipment. Made from high-quality polypropylene material, this carrying case ensures maximum protection against impact and damage. Its sturdy construction guarantees long-lasting performance, making it ideal for professionals on the go. With its spacious interior, you can conveniently store and organize your gear with ease. The Glensound INFERNO CARRYING CASE is designed to be versatile and user-friendly, featuring a comfortable handle for effortless transportation. Whether you are traveling to a studio or out in the field, trust this polypropylene carrying case to keep your equipment safe and secure at all times.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45107306496079,"sku":"INFERNO CARRYING CASE","price":158.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/glensound-inferno-carrying-case-polypropylene-carrying-case.jpg?v=1776455675"},{"product_id":"glensound-cu001-dante-v1-commentary-unit","title":"Glensound CU001 Dante V1 Commentary Unit","description":"\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnalogue and Dante\/AES67 I\/O\u003c\/li\u003e\n\u003cli\u003e48v Phantom Power\u003c\/li\u003e\n\u003cli\u003eUpgraded Input Gain Pot\u003c\/li\u003e\n\u003cli\u003eInput Gain Range: -20 to +10 dB\u003c\/li\u003e\n\u003cli\u003eGPOs on Mic and Talkback Buttons\u003c\/li\u003e\n\u003cli\u003eThree Front Panel Inputs (Mic\/Line Switchable)\u003c\/li\u003e\n\u003cli\u003eGlobal Low Frequency Cut\u003c\/li\u003e\n\u003cli\u003ePreset Compressor\/Limiter per Input\u003c\/li\u003e\n\u003cli\u003eDirect Discrete Output on Rear Panel\u003c\/li\u003e\n\u003cli\u003eMixed Output on XLR and 3.5mm Jack Socket\u003c\/li\u003e\n\u003cli\u003eThree Common Talkback Circuits\u003c\/li\u003e\n\u003cli\u003eTwo Main Commentator Monitoring Sections\u003c\/li\u003e\n\u003cli\u003eInternal Switch Mode Power Supply (100-250v AC)\u003c\/li\u003e\n\u003cli\u003e2 x RJ45 Network Connections\u003c\/li\u003e\n\u003cli\u003eSize: 277 x 266 x 105mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45107328942159,"sku":"CU001 Dante V1","price":5105.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/commentary-unit-glensound-cu001-dante-v1.jpg?v=1776455979"},{"product_id":"glensound-cu001-ravenna-v1-three-commentator-unit-with-analogue","title":"Glensound CU001 Ravenna V1 Three Commentator Unit With Analogue","description":"\u003cp\u003e\u003cspan\u003eThe CU001 Ravenna is a highly versatile commentary unit. It was designed after close consultation with end users and the result is a stand alone unit which offers a wide range of facilities, and it is equally at home on the terraces, as it is in a studio.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe CU001 Ravenna\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe CU001 Ravenna version now adds the following as standard features:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eanalogue and Ravenna\/AES67 I\/O\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e48v phantom power\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eupgraded input gain pot\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003einput gain range increased from -20 to +10 dB\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGPOs on Mic and talkback buttons to allow integration with main intercom or talkback system\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInputs\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThree front panel inputs are mic\/line switchable with selectable 48v phantom power. The front panel also has a small gain adjustment pot. Mic on\/off switches can be selected in on\/off mode or in cough mode. There is a global low frequency cut that can be selected on or off, and a preset compressor\/limiter per input.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOutputs\/Talkback\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eEach input has a direct discrete output on the rear panel along with a mixed output of all of the inputs, all on XLR. The mixed output is also available on an un-balanced 3.5mm jack socket as a local record. The direct output levels can be set in 3 positions:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1: 0dB + limiter: This is the normal operation and it limits peak levels.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e2: 0dB: This feeds the output with an un-compressed nominal level of 0dB, for when the peak signal level will be controlled by outboard equipment.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e3: -20dB: This feeds the output with a nominal level of -20dB providing extra headroom.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThere are 3 common talkback circuits with individual buttons on the two main commentators’ sections (Position B's input cannot be switched to a talkback output). The operation of the talkback buttons features Config+ for configuring in different modes.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonitoring\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThere are two main commentator monitoring sections, each with two separate 6.35mm A or B gauge jack sockets for headphones. In this way, the centre position B commentator can choose to share the monitoring of commentator A or C. There are 5 common external sources available for monitoring, plus an additional control which is the sum of the other 2 commentators\/inputs. Each of the 6 pots has variable level control and left\/both\/right switching allowing commentator A and C to achieve their desired mix and balance levels. The sidetone control is located on the rear panel for commentator A and C to adjust the level of their own voice. There is a 7 segment LED PPM meter.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Ravenna inputs are mixed with the analogue inputs so only one of the analogue or Ravenna inputs should be used at a time.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThere is an internal switch mode power supply 100-250v AC, with external power via a 4 pin XLR 9-18v DC.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNetworking\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThere are 2 x RJ45 network connections for a primary and secondary network.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFlight Case\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eBy popular demand a hard wearing strong polypropylene flight case is now available for all of the GS-CU001 range. It features long life hinges, easy to use catches and being made out of hardwearing polypropylene plastic, it will last for years. Internally the case is lined with cut out medium density foam. The multipurpose cut outs can be adapted to accept any of the different size GS-CU001 units. A second small cut out is included suitable for two HMD25 headsets \u0026amp; mains cable.\u003c\/span\u003e\u003c\/p\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45107343294543,"sku":"CU001 Ravenna V1","price":5299.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/ContainerBridge_1024x1024_2x_983501ec-8419-44dd-b1a7-ea196fee90cd.webp?v=1776456306"},{"product_id":"glensound-paradiso-dante-aes67-commentators-box","title":"Glensound PARADISO Dante AES67 Commentators Box","description":"\u003cp\u003eParadiso is a commentators box for 3 commentators. It can be used by itself to provide the commentary facilities alongside an OB truck for small events or multiple Paradisos can be used at large events that require Worldwide broadcast coverage.\u003c\/p\u003e\n\u003cp\u003eAudio links between the Paradiso and other equipment are by Dante (AES67 compliant) complete with redundant copper \u0026amp; fibre links. Analogue I\/O and AES3 I\/O are also provided directly from the unit for local connections and\/ or another layer of redundancy.\u003c\/p\u003e\n\u003cp\u003eThe Paradiso has been designed to be intuitive \u0026amp; easy to use for Commentators’ who would rather be talking about the game than working out how the equipment works, and is also built to our exacting rugged \u0026amp; robust standard to make it a reliable piece of broadcast equipment for the busy engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8 off Audio Volume Controls for Each Commentators with Pan\u003cbr\u003e\u003c\/strong\u003eOn the top panel are 24 rotary headphone volume encoders. Internally they are connected to a DSP matrix and the sources can be set depending upon your preference.\u003c\/p\u003e\n\u003cp\u003eNext to each encoder is an ePaper display which provides a visual indication of both the position of the volume control and the current panning position of the source in the commentators headphones.\u003cbr\u003eTurning the encoder adjusts the volume, and simultaneously pressing down and turning the encoder adjusts the pan.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eePaper Displays\u003cbr\u003e\u003c\/strong\u003eThe ePaper displays provide an indication of headphone volume and pan position. They also display the name of the associated audio source\/ destination. The display name can be custom set or taken from the routed source name from within the Dante network. The bottom ePaper display that has no associated switch or encoder can be programmed to display a users name, but this is overridden temporarily when the associated inputs gain control is adjusted and the display shows the gain in dB of the input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePeak Programme Meter (PPM)\u003cbr\u003e\u003c\/strong\u003eThe source of the PPM can be customised but is normally the outgoing programme mix. When a front panel gain control is adjusted the PPM automatically shows just the level from that input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRobust Mic on and Talkback Buttons\u003cbr\u003e\u003c\/strong\u003eThere are 4 off round bright illuminated talkback buttons and 1 large square illuminated mic on button for each of the 3 commentators. The audio circuits that the outputs of these switches are routed to can be fully configured. The operation of these switches (momentary, latching etc) and the interaction of these switches (i.e. pressing a talkback switches mutes the main mic) can be fully configured by the windows 11 app.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAudio Inputs\u003cbr\u003e\u003c\/strong\u003eThere are 3 balanced audio inputs one for each commentator. Each of these inputs can be selected to accept a Microphone or Line level source. 48V phantom power can be turned on if in microphone mode.\u003c\/p\u003e\n\u003cp\u003eA very high quality remote controlled microphone amplifier has been used followed by exception analogue to digital converter to make the audio quality the best that it can possibly be.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain Control\u003cbr\u003e\u003c\/strong\u003eThe gain control is a rotary encoder with a clear plastic shaft. When the gain control is operated the ePaper display above the control indicates the current amount of gain being applied and the front panel PPM automatically solos the source to allow unambiguous gain settings. The clear plastic shaft has an internal red LED that is illuminated if an input level is close to clipping, thus allowing quick diagnostics of a gain level that has been set too high.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntelligent Headphone Output Circuits\u003cbr\u003e\u003c\/strong\u003eOur unique intelligent headphone output circuits automatically adjust the output level to suit both high and low impedance headphones. Traditional broadcast high impedance headphones require a large output level to produce enough volume in the headphones, whereas low impedance headphones require much less level to produce a proportional output level. This means that whatever headphones you connect to the Paradiso you’ll enough audio output for even the loudest of environments.\u003c\/p\u003e\n\u003cp\u003ePlus our headphone amplifiers can accept mono as well as stereo headphones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAux In\u003cbr\u003e\u003c\/strong\u003eIn addition to the three commentators inputs there is a 4th ‘Auxiliary’ Input. This is provided on a stereo 3.5mm jack socket and is suitable for connection to the outputs of domestic recording devices such as a mobile phone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRedundant Powering Options\u003cbr\u003e\u003c\/strong\u003eThe Pardiso can be powered from any of 4 different sources:\u003c\/p\u003e\n\u003cp\u003e1) Wide range Mains Input (suitable fo Worlwide use)\u003cbr\u003e2) PoE on the Primary CAT5 Network link\u003cbr\u003e3) PoE on the Secondary CAT5 Network link\u003cbr\u003e4) External 12V DC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary \u0026amp; Secondary Fibre Connections\u003c\/strong\u003e\u003cbr\u003eTwo industry standard Neutrik Opticons are fitted for fibre connectivity to the IP network. These are connected internally to single mode fibre drivers, but multimode can be supplied if required instead.The primary \u0026amp; secondary network circuits allow for glitch free redundancy across both the Fibre \u0026amp; Copper network interfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary \u0026amp; Secondary Copper Network Connections with PoE\u003cbr\u003e\u003c\/strong\u003eTwo CAT6 connections on Neutrik Ethercons (that accept standard networking cables) are provided to allow copper connections to local network switches to carry the Dante\/ AES67 audio. Two connections are fitted to allow redundant circuits to be used if required.\u003c\/p\u003e\n\u003cp\u003eBoth these connectors can accept a PoE power source for providing the power to the Inferno.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnalogue Inputs \u0026amp; Outputs\u003cbr\u003e\u003c\/strong\u003eFive analogue inputs and outputs are provided for backup or local I\/O purposes. These circuits are routed internally via the DSP and therefore can be routed to and from any location including Dante circuits required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAES \u0026amp; GPIO\u003cbr\u003e\u003c\/strong\u003eA D9 socket provides 2 general purpose outputs (GPO) for connection to red lights \u0026amp; TB systems, 2 general purpose inputs (GPI) are also fitted for external triggering. The same D9 socket also has an AES3 input \u0026amp; output circuit for further audio connectivity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComprehensive commentary unit\u003c\/li\u003e\n\u003cli\u003eSuitable for 3 commentators on 1 programme or 3 separate programmes\u003c\/li\u003e\n\u003cli\u003eGlitch free redundant Dante network audio\u003c\/li\u003e\n\u003cli\u003eTwo copper \u0026amp; two fibre network interfaces\u003c\/li\u003e\n\u003cli\u003eMultiple power sources (PoE x 2), Mains \u0026amp; DC\u003c\/li\u003e\n\u003cli\u003eBest microphone amplifiers available\u003c\/li\u003e\n\u003cli\u003eePaper displays to make the commentators life easy\u003c\/li\u003e\n\u003cli\u003eLocal analogue and AES3 inputs \u0026amp; outputs for extra redundancy\u003c\/li\u003e\n\u003cli\u003eIncludes our much revered Referee compressor\/ limiter\u003c\/li\u003e\n\u003cli\u003eWindows 11 app for remote control \u0026amp; setup\u003c\/li\u003e\n\u003cli\u003eNo expense spared to make this the best commentary unit ever\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAudio\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic Input Gain Range --2db to +78dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDynamic Mic Line Up -55dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic + Phantom Power Line Up -45dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine Input Line Up  0dBu (Gain range +\/-20+dB)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic Input Impedance 2k4\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine Input Impedance \u0026gt;10k\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise -127dBu (22-22kHz RMS terminated 300 Ohms)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level Before Clipping Dynamic Mic:\u003c\/li\u003e\n\u003cli\u003e+18dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic + 48V PH: +18dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: +18dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response Mic: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+\/-0.25dB 150Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e-6dB@25Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: +\/-0.25dB 80Hz to 22kHz\u003c\/li\u003e\n\u003cli\u003eTHD + Noise (Ref +8dBu): \u003c\/li\u003e\n\u003cli\u003e100Hz = 0.05%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1kHz = 0.002%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10kHz = 0.004%\u003c\/li\u003e\n\u003cli\u003eHeadphone Impedance 16 to 1000 Ohms (Auto output level to match impedance)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Headphone Output +12dBu into 600 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Frequency Response +\/- 0.1dB 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Noise -76dB @ lineup (residual noise)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone THD + Noise (ref =8dBu) 0.008% @ 1kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Volume Pot Range +10dB to Off (+10dB to -30dB configuration option)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDante\/AES67 Network Interface Sample Frequency: 48kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution: 24 Bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan be configured for AES67\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e32 audio channels to\/from network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExternal Mains PSU Filtered IEC, 100 to 240VAC (+\/-10%) 47 - 63Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAC Consumption DC inputs 2.5mm Barrel, Centre +Ve, 9 - 15 Volts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower On LED Bright Blue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize 256 x 285 x 115mm (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight 2.75kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMechanics All aluminium construction, anodized and laser etched, powder coated sides\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Carton Rugged export quality cardboard carton 610 x 420 x 170mm (WxDxH) \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45107442548815,"sku":"PARADISO","price":9585.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_50a8f2d4-a383-441b-8d68-3c1c90ce5f88.jpg?v=1776456991"},{"product_id":"glensound-paradiso-lite-dante-aes67-commentators-box","title":"Glensound PARADISO LITE Dante AES67 Commentators Box","description":"\u003cp\u003eParadiso Lite is a commentators' box for 3 commentators. It can be used by itself to provide the commentary facilities alongside an OB truck for small events or multiple Paradiso Lites can be used at large events that require Worldwide broadcast coverage.\u003c\/p\u003e\n\u003cp\u003eAudio links between the Paradiso and other equipment are by Dante (AES67 compliant) complete with redundant copper links. Analogue I\/O and AES3 I\/O are also provided directly from the unit for local connections and \/ or another layer of redundancy.\u003c\/p\u003e\n\u003cp\u003eThe Paradiso Lite has been designed to be intuitive \u0026amp; easy to use for Commentators who would rather be talking about the game than working out how the equipment works, and is also built to our exacting rugged \u0026amp; robust standard to make it a reliable piece of broadcast equipment for the busy engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8 off Audio Volume Controls for Each Commentators with Pan\u003c\/strong\u003e\u003cbr\u003eOn the top panel are 24 rotary headphone volume encoders. Internally they are connected to a DSP matrix and the sources can be set depending upon your preference.\u003cbr\u003eAt the top of the front panel on the right hand side is a row of clear bright yellow LEDs. When an encoder is turned to adjust the volume, this row of LEDs illuminate to show the current position of that encoder. When the encoder is used to adjust the pan of the source then this row of LEDs illuminate with a single LED indicating the current panned position. \u003cbr\u003eTurning the encoder adjusts the volume, and simultaneously pressing down and turning the encoder adjusts the pan.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePeak Programme Meter (PPM)\u003c\/strong\u003e\u003cbr\u003eThe source of the PPM can be customised but is normally the outgoing programme mix. When a front panel gain control is adjusted the PPM automatically shows just the level from that input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRobust Mic on and Talkback Buttons\u003c\/strong\u003e\u003cbr\u003eThere are 4 off round bright illuminated talkback buttons and 1 large square illuminated mic on button for each of the 3 commentators. The audio circuits that the outputs of these switches are routed to can be fully configured. The operation of these switches (momentary, latching etc) and the interaction of these switches (i.e. pressing a talkback switch mutes the main mic) can be fully configured by the windows 11 app.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAudio Inputs\u003c\/strong\u003e\u003cbr\u003eThere are 3 balanced audio inputs one for each commentator. Each of these inputs can be selected to accept a Microphone or Line level source. 48V phantom power can be turned on if in microphone mode.\u003cbr\u003eA very high quality remote controlled microphone amplifier has been used followed by an exceptional analogue to digital converter to make the audio quality the best that it can possibly be.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain Control\u003c\/strong\u003e\u003cbr\u003eThe gain control is a rotary encoder with a clear plastic shaft. When the gain control is operated the front panel PPM automatically solos the source to allow unambiguous gain settings. The clear plastic shaft has an internal red LED that is illuminated if an input level is close to clipping, thus allowing quick diagnostics of a gain level that has been set too high.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIntelligent Headphone Output Circuits \u003c\/strong\u003e\u003cbr\u003eOur unique intelligent headphone output circuits automatically adjust the output level to suit both high and low impedance headphones. Traditional broadcast high impedance headphones require a large output level to produce enough volume in the headphones, whereas low impedance headphones require much less level to produce a proportional output level. This means that whatever headphones you connect to the Paradiso you’ll have enough audio output for even the loudest of environments. \u003c\/p\u003e\n\u003cp\u003ePlus our headphone amplifiers can accept mono as well as stereo headphones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAux In\u003cbr\u003e\u003c\/strong\u003eIn addition to the three commentators' inputs there is a 4th ‘Auxiliary’ Input. This is provided on a stereo 3.5mm jack socket and is suitable for connection to the outputs of domestic recording devices such as a mobile phone.\u003c\/p\u003e\n\u003cp\u003eRedundant Powering Options\u003c\/p\u003e\n\u003cp\u003eThe Pardiso can be powered from any of 4 different sources:\u003cbr\u003e1) Wide range Mains Input (suitable fo Worlwide use)\u003cbr\u003e2) PoE on the Primary CAT5 Network link\u003cbr\u003e3) PoE on the Secondary CAT5 Network link\u003cbr\u003e4) External 12V DC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary \u0026amp; Secondary Copper Network Connections with PoE\u003cbr\u003e\u003c\/strong\u003eTwo CAT6 connections on Neutrik Ethercons (that accept standard networking cables) are provided to allow copper connections to local network switches to carry the Dante \/ AES67 audio. Two connections are fitted to allow redundant circuits to be used if required.\u003c\/p\u003e\n\u003cp\u003eBoth these connectors can accept a PoE power source for providing the power to the Paradiso Lite.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnalogue Inputs \u0026amp; Outputs\u003cbr\u003e\u003c\/strong\u003eFive analogue inputs and outputs are provided for backup or local I\/O purposes. These circuits are routed internally via the DSP and therefore can be routed to and from any location including Dante circuits required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAES \u0026amp; GPIO\u003cbr\u003e\u003c\/strong\u003eA D9 socket provides 4 general purpose input \/ outputs (GPIO) for connection to red lights, TB systems or external switches.  The same D9 socket also has an AES3 input \u0026amp; output circuit for further audio connectivity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComprehensive commentary unit\u003c\/li\u003e\n\u003cli\u003eSuitable for 3 commentators on 1 programme or 3 separate programmes\u003c\/li\u003e\n\u003cli\u003eGlitch free redundant Dante network audio\u003c\/li\u003e\n\u003cli\u003eTwo copper network interfaces\u003c\/li\u003e\n\u003cli\u003eMultiple power sources (PoE x 2), Mains \u0026amp; DC\u003c\/li\u003e\n\u003cli\u003eBest microphone amplifiers available\u003c\/li\u003e\n\u003cli\u003eLocal analogue and AES3 inputs \u0026amp; outputs for extra redundancy\u003c\/li\u003e\n\u003cli\u003eIncludes our much revered Referee compressor\/ limiter\u003c\/li\u003e\n\u003cli\u003eWindows 11 app for remote control \u0026amp; setup\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45107491635279,"sku":"PARADISO LITE","price":7035.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_7601ce5d-b7fc-4b40-8911-e227e9dc2ce8.jpg?v=1776458243"},{"product_id":"glensound-vita-mini-3f-compact-beltpack-for-on-air-communications","title":"Glensound VITA MINI\/3F Compact Beltpack For On Air Communications","description":"\u003cp\u003e\u003cspan\u003eThe VITA Mini Is A Dante Network Audio Interface, In A Compact Belt Pack Style. It Has A Mic\/Line Input And Headphone Monitoring Connection For A Single User, And Contains Two 4 Wire Circuits. One Of These Is Typically Used As An On Air Channel, And The Other As A Talkback Channel. The High Quality Microphone Input, With The Glensound Referee Compressor, Makes The Vita Mini Suitable For On Air Commentary Use, Particularly When Pitch Side. The Flexibility Of The Talk Button Configurations, Means That The Vita Mini Can Also Be Used As A Talkback Unit As Part Of A Dante Or AES67 Network.\u003c\/span\u003e\u003c\/p\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45107493306447,"sku":"VITA MINI\/3F","price":1635.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/VITAMINI-3F_CompactBeltpackforOnAirCommunications.png?v=1776458688"},{"product_id":"glensound-vita-mini-x-3f-compact-beltpack-dante-audio-interface-broadway-design","title":"Glensound VITA MINI X\/3F Compact Beltpack Dante Audio Interface Broadway Design","description":"\u003cp\u003e\u003cspan\u003eDante network audio interface, in a compact belt pack style. It has a mic input and headphone monitoring connection for a single user, and contains two 4 wire circuits. One of these is typically used as an on air channel, and the other as a talkback channel. The high quality microphone input, with the Glensound Referee compressor, makes the VITA Mini X suitable for on air commentary use, particularly when pitch side. The flexibility of the talk button configurations means that the VITA Mini X can also be used as a talkback unit as part of a Dante® or AES67 network. Settings can all be controlled using the Windows 10 app GlenController. Dante Broadway design allowing for greater functionality and network bandwidth. With 3 pin female XLR mic input\u003c\/span\u003e\u003c\/p\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45112572510287,"sku":"VITA MINI X\/3F","price":2039.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/VITAMINIX-3F_CompactBeltpack-DanteBroadwayDesign.png?v=1776691955"},{"product_id":"glensound-vita-mini-x-4m-compact-beltpack-dante-audio-interface-broadway-design","title":"Glensound VITA MINI X\/4M Compact Beltpack Dante Audio Interface Broadway Design","description":"\u003cp\u003e\u003cspan\u003eDante network audio interface, in a compact belt pack style. It has a mic input and headphone monitoring connection for a single user, and contains two 4 wire circuits. One of these is typically used as an on air channel, and the other as a talkback channel. The high quality microphone input, with the Glensound Referee compressor, makes the VITA Mini X suitable for on air commentary use, particularly when pitch side. The flexibility of the talk button configurations means that the VITA Mini X can also be used as a talkback unit as part of a Dante® or AES67 network. Settings can all be controlled using the Windows 10 app GlenController. Dante Broadway design allowing for greater functionality and network bandwidth. With 4 pin male headset connection (mono headphones)\u003c\/span\u003e\u003c\/p\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45112584863823,"sku":"VITA MINI X\/4M","price":2039.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/VITAMINIX-4M_CompactBeltpack-DanteBroadwayDesign_4M.png?v=1776692143"},{"product_id":"glensound-vita-mini-x-5f-compact-beltpack-dante-audio-interface-broadway-design","title":"Glensound VITA MINI X\/5F Compact Beltpack Dante Audio Interface Broadway Design","description":"\u003cp\u003e\u003cspan\u003eDante network audio interface, in a compact belt pack style. It has a mic input and headphone monitoring connection for a single user, and contains two 4 wire circuits. One of these is typically used as an on air channel, and the other as a talkback channel. The high quality microphone input, with the Glensound Referee compressor, makes the VITA Mini X suitable for on air commentary use, particularly when pitch side. The flexibility of the talk button configurations means that the VITA Mini X can also be used as a talkback unit as part of a Dante® or AES67 network. Settings can all be controlled using the Windows 10 app GlenController. Dante Broadway design allowing for greater functionality and network bandwidth. With 5 pin female headset connection\u003c\/span\u003e\u003c\/p\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45112731959375,"sku":"VITA MINI X\/5F","price":2039.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/VITAMINIX-5F_CompactBeltpack-DanteBroadwayDesign_5F.png?v=1776693024"},{"product_id":"glensound-vita-plus-commentary-unit-with-talkback-dante-interface","title":"Glensound VITA PLUS Commentary Unit With Talkback \u0026 Dante Interface","description":"\u003cp\u003eThe VITA PLUS is a very powerful Dante network audio interface, in a traditional desktop style. It has a mic\/line input and headphone monitoring connection for a single user, and contains two 4 wire circuits. One of these is typically used as an on air channel, and the other as a talkback channel.\u003c\/p\u003e\n\u003cp\u003eThe high quality microphone input, with the Glensound Referee compressor, makes the Vita Plus suitable for on air commentary use, perfect for a small OB or in an off-tube booth.\u003c\/p\u003e\n\u003cp\u003eThe flexibility of the talk button configurations, means that the Vita Plus can also be used as a talkback unit as part of a Dante network.\u003c\/p\u003e\n\u003cp\u003eThe Vita Plus can connect to any Dante network, or to other audio equipment via Glensound’s own Dante interface units.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo Four Wire Circuits\u003cbr\u003e\u003c\/strong\u003eThe VITA PLUS has two 4 wire circuits. These are typically used as main programme on air, with a separate talkback circuit. The push buttons for each circuit are configurable and can operate in different modes, to allow configuration for different types of uses:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatching on\/off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMomentary push to talk (PTT)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligent mode where a short tap is latching, but a longer hold becomes momentary\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlways on and mutes when pressed (cough)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePressing one button, mutes the other circuit (talkback)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphone Monitoring\u003c\/strong\u003e\u003cbr\u003eThere are 6.35mm and 3.5mm jack sockets for headphone monitoring on both the front \u0026amp; rear of the unit. Each of the two 4 wire inputs can be selected to be in the left ear, right ear, or both ears of the headphones, depending on the users preference. The level of each input can also be independently selected.\u003cbr\u003e\u003cbr\u003eThe headphone amplifier is intelligent and capable of driving correct levels into low or high impedance headphones and capable of connecting directly to both stereo or mono headphones and earpieces.\u003cbr\u003e\u003cbr\u003eThe headphone monitor also includes sidetone (at a programmable level) - sidetone is the commentator’s own voice.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Input\u003c\/strong\u003e\u003cbr\u003eThe Vita Plus is a single user unit, with one high quality input. The input is mic\/mic+48v\/line switchable, on a 3 pin XLR, with a variable gain control. As the Vita Plus can be used for on air broadcast, Glensound’s Referee compressor limiter is used to control the audio levels and prevent any clipping. The Referee compressor has been developed over many years of working with sports commentators, and provides a gently increasing compression as the input signal approaches clipping. In normal use the compressor is not active as it only starts working as clipping approaches, so normal dynamic range is maintained.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Audio Link\u003c\/strong\u003e\u003cbr\u003eThe VITA PLUS is Dante network audio compatible. The network connection is via a single Neutrik XLR RJ45. This link carries:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 audio inputs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 audio outputs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower over Ethernet (PoE)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAudio connections across the network can be to:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnother VITA as a point to point 4W connection\u003c\/li\u003e\n\u003cli\u003eAn Expressip Commentary Unit, an Inferno Commentary Unit or a GS-FW012 ip 4 wire unit as part of a talkback setup.\u003c\/li\u003e\n\u003cli\u003eAn AoIP44, DARK88 or DARK 1616 audio input\/output interface\u003c\/li\u003e\n\u003cli\u003eAny other Dante compatible unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eThe Vita has two power sources. It can be connected to a PoE network switch or PoE midspan power supply. There is also an internal wide range switch mode power supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePPM Meter\u003c\/strong\u003e\u003cbr\u003eThere is a simple to use 4 segment PPM meter on the VITA Plus’s front panel.\u003cbr\u003eThe meter indicates the outgoing level in dBs and provides indication of the level in 6dB steps from -12 to +6. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete commentary functionality and 4W in a desktop format\u003c\/li\u003e\n\u003cli\u003eDante AoIP network  \u003c\/li\u003e\n\u003cli\u003eInput is switchable from line, mic, or mic + 48v phantom power\u003c\/li\u003e\n\u003cli\u003eLow noise, high headroom mic amplifier\u003c\/li\u003e\n\u003cli\u003e48K 24bit A\/D converter\u003c\/li\u003e\n\u003cli\u003eHeadphone output on 6.35mm jack socket\u003c\/li\u003e\n\u003cli\u003eTwo outputs: one for main programme audio, one for talk back circuit, are both on the single RJ45\/CAT5 network audio connection\u003c\/li\u003e\n\u003cli\u003eIndependently configurable buttons for both outputs using Config+: latching, momentary or lazy\u003c\/li\u003e\n\u003cli\u003eTwo inputs for headphone monitoring from network audio connection, both with adjustable level\u003c\/li\u003e\n\u003cli\u003eHeadphone inputs have left\/both\/right switching\u003c\/li\u003e\n\u003cli\u003eGlensound intelligent headphone amp provides correct output levels into low or high impedance headphones and can also correctly drive mono earpieces with mono jack plugs.\u003c\/li\u003e\n\u003cli\u003ePowered via PoE, or internal switch mode PSU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIC INPUT GAIN RANGE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e-18dBu to +12dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDYNAMIC MIC LINE UP\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e58dBu\u003c\/li\u003e\n\u003cli\u003eMIC + PHANTOM POWERT LINE UP\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e42dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLINE INPUT LINE UP\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0dBu (Gain range +\/-15dB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEQUIVALENT INPUT NOISE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e124dBu (22-22KHz RMS gain @ max) Input terminated with 300 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFREQUENCY REPONSE (Mic-Line)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMIC: \u0026gt;+\/-0.25dB 50Hz to 22kHz (-2dB @ 25Hz)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: \u0026gt;-0.1dB 22Hz to 22kHz\u003c\/li\u003e\n\u003cli\u003ePHANTOM POWER\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e48 Volt Phantom power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMAXIMUM INPUT BEFORE CLIPPING\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic MIC: -2dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic + 48V Phantom: +12dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: +18dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTHD+NOISE (Ref +8dBu)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e100Hz = 0.016%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1kHz = 0.012%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10kHz = 0.011%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePPM METERS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 x LEDS (–12,-6,0,+6 dBu with reference to prog out)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONE IMPEDANCE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32 - 1000 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAuto output level to match impedance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMAXIMUM HEADPHONE OUTPUT LEVEL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+15.8dB into 600 Ohms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONE FREQUENCY RESPONSE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u0026gt;-0.1dB 22Hz to 22kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONE NOISE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e-74dB @ lineup (residual noise)\u003c\/li\u003e\n\u003cli\u003eHEADPHONE THD + NOISE (Ref +8dBu)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.008% @ 1kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONE VOLUME POT RANGE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDefault: +10dB to Off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional configuration via App: +10dB to -20dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDANTE NETWORK AUDIO CONNECTION\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: 48kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution: 24 bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCAT5 on an RJ45 connection.  Two send channels and two receive channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eREMOTE CONTROL APPLICATION\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWindows 11 direct install application (Not downloaded from app store)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoE on CAT5 connection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInternal mains supply: 100 - 240VAC (+\/-10%) 47 - 63Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum consumption 7 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOVERALL SIZE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e41 x 214 x 172 mm (H x W x D)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUNIT WEIGHT\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e920 Grams\u003c\/li\u003e\n\u003cli\u003eMECHANICS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAll aluminium construction, anodised and laser etched panels, Nylon dipped sides\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook A5 (Download also available)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 metre RJ45 cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMains cable (UK \u0026amp; Europe only)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45112995414095,"sku":"VITA PLUS","price":1940.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_406fb40e-46f3-4938-94dd-654f624c2394.jpg?v=1776695694"},{"product_id":"glensound-vita-bb-plus-dante-aes67-announcers-box","title":"Glensound VITA BB PLUS Dante\/ AES67 Announcers Box","description":"\u003cp\u003e\u003cstrong\u003eTwo Four Wire Circuits\u003c\/strong\u003e\u003cbr\u003eThe VITA BB PLUS has two 4 wire circuits. These are typically used as main programme on air, with a separate talkback circuit. The push buttons for each circuit are configurable and can operate in different modes, to allow configuration for different types of uses:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatching on\/off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMomentary push to talk (PTT)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligent mode where a short tap is latching, but a longer hold becomes momentary\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlways on and mutes when pressed (cough)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePressing one button, mutes the other circuit (talkback)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphone Monitoring\u003c\/strong\u003e\u003cbr\u003eThere are 6.35mm and 3.5mm jack sockets for headphone monitoring on both the front \u0026amp; rear of the unit. Each of the two 4 wire inputs can be selected to be in the left ear, right ear, or both ears of the headphones, depending on the users preference. The level of each input can also be independently selected.\u003cbr\u003e\u003cbr\u003eThe headphone amplifier is intelligent and capable of driving correct levels into low or high impedance headphones and capable of connecting directly to both stereo or mono headphones and earpieces.\u003cbr\u003e\u003cbr\u003eThe headphone monitor also includes sidetone (at a programmable level) - sidetone is the commentator’s own voice.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Input\u003c\/strong\u003e\u003cbr\u003eThe VITA BB PLUS is a single user unit, with one high quality microphone input. The input is mic\/mic+48V\/line switchable, on a 3 pin XLR, with a variable gain control. As the Vita Plus can be used for on air broadcast, Glensound’s Referee compressor limiter is used to control the audio levels and prevent any clipping. The Referee compressor has been developed over many years of working with sports commentators, and provides a gently increasing compression as the input signal approaches clipping. In normal use the compressor is not active as it only starts working as clipping approaches, so normal dynamic range is maintained.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Audio Link\u003c\/strong\u003e\u003cbr\u003eThe VITA PLUS is Dante \/ AES67 network audio compatible. The network connection is via a single Neutrik XLR RJ45. This link carries:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 audio inputs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 audio outputs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower over Ethernet (PoE)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAudio connections across the network can be to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnother VITA as a point to point 4W connection\u003c\/li\u003e\n\u003cli\u003eAn Expressip Commentary Unit, an Inferno Commentary Unit or a GS-FW012 ip 4 wire unit as part of a talkback setup.\u003c\/li\u003e\n\u003cli\u003eAn AoIP44, DARK88 or DARK 1616 audio input\/output interface\u003c\/li\u003e\n\u003cli\u003eAny other Dante compatible unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eThe VITA BB PLUS is powered by PoE network switches or PoE midspan power supplies. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePPM Meter\u003c\/strong\u003e\u003cbr\u003eThere is a simple to use 4 segment PPM meter on the VITA BB Plus’s front panel.\u003cbr\u003eThe meter indicates the outgoing level in dBs and provides indication of the level in 6dB steps from -12 to +6.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete commentary functionality and 4W in a desktop format\u003c\/li\u003e\n\u003cli\u003eLarge Format Illuminated Front Panel Switches (BIG BUTTONS (BB))\u003c\/li\u003e\n\u003cli\u003eDante\/ AES67 AoIP network  \u003c\/li\u003e\n\u003cli\u003eInput is switchable from line, mic, or mic + 48V phantom power\u003c\/li\u003e\n\u003cli\u003eLow noise, high headroom mic amplifier\u003c\/li\u003e\n\u003cli\u003e48K 24bit A\/D converter\u003c\/li\u003e\n\u003cli\u003eHeadphone output on 6.35mm jack socket\u003c\/li\u003e\n\u003cli\u003eTwo outputs: one for main programme audio, one for talk back circuit, are both on the single RJ45\/CAT5 network audio connection\u003c\/li\u003e\n\u003cli\u003eIndependently configurable buttons for both outputs using Config+: latching, momentary or lazy\u003c\/li\u003e\n\u003cli\u003eTwo inputs for headphone monitoring from network audio connection, both with adjustable level\u003c\/li\u003e\n\u003cli\u003eHeadphone inputs have left\/both\/right switching\u003c\/li\u003e\n\u003cli\u003eGlensound intelligent headphone amp provides correct output levels into low or high impedance headphones and can also correctly drive mono earpieces with mono jack plugs.\u003c\/li\u003e\n\u003cli\u003ePowered via PoE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIC INPUT GAIN RANGE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e-18dBu to +12dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDYNAMIC MIC LINE UP\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e58dBu\u003c\/li\u003e\n\u003cli\u003eMIC + PHANTOM POWERT LINE UP\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e42dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLINE INPUT LINE UP\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0dBu (Gain range +\/-15dB)\u003c\/li\u003e\n\u003cli\u003eEQUIVALENT INPUT NOISE\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e124dBu (22-22kHz RMS gain @ max) Input terminated with 300 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFREQUENCY REPONSE (Mic-Line)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMIC: \u0026gt;+\/-0.25dB 50Hz to 22kHz (-2dB @ 25Hz)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: \u0026gt;-0.1dB 22Hz to 22kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHANTOM POWER\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e48 Volt Phantom power \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMAXIMUM INPUT BEFORE CLIPPING\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic MIC: -2dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMic + 48V Phantom: +12dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine: +18dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTHD+NOISE (Ref +8dBu)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e100Hz = 0.016%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1kHz = 0.012%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10kHz = 0.011%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePPM METERS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 x LEDS (–12,-6,0,+6 dBu with reference to prog out)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONE IMPEDANCE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32 - 1000 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAuto output level to match impedance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMAXIMUM HEADPHONE OUTPUT LEVEL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+15.8dB into 600 Ohms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONE FREQUENCY RESPONSE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u0026gt;-0.1dB 22Hz to 22kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONE NOISE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e-74dB @ lineup (residual noise)\u003c\/li\u003e\n\u003cli\u003eHEADPHONE THD + NOISE (Ref +8dBu)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.008% @ 1kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHEADPHONE VOLUME POT RANGE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDefault: +10dB to Off\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional configuration via App: +10dB to -20dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDANTE NETWORK AUDIO CONNECTION\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: 48 - 96kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution: 24 bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67 Compliant\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCAT5 on an RJ45 connection.  Two send channels and two receive channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eREMOTE CONTROL APPLICATION\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWindows 10 direct install application (Not downloaded from app store)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoE on CAT5 connection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum consumption 7 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOVERALL SIZE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e80 x 174 x 168 mm (H x W x D)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUNIT WEIGHT\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e720 Grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMECHANICS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll aluminium construction, anodised and laser etched panels, powder coated sides\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook available by download \u003c\/li\u003e\n\u003cli\u003e2 metre RJ45 cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45113022709839,"sku":"VITA BB PLUS","price":2039.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_076b4270-6a33-4b95-84b2-b0b33830b5e4.jpg?v=1776696266"},{"product_id":"glensound-gtm-esports-gamers-interface","title":"Glensound GTM eSports Gamers Interface","description":"\u003cp\u003eThe GTM combines the multiple functions required for the interfacing and communications required in eSports tournaments into one simple to use device. GTM provides the interface for the gamers, provides the intercom mix, and allows remote control by tournament engineers. There are separate modes that also mean the GTM can be used by the Coaches, Referees, and arena Announcers.\u003cbr\u003eThe GTM is available in a stripped down version, with no direct top panel controls, for system integrators\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eTop Panel Mixer\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe top panel contains three level controls for the user to adjust their desired mix into their headphones from the following sources:\u003cbr\u003e\u003cstrong\u003eGAME:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis is the stereo level of the game audio\u003cbr\u003e\u003cstrong\u003eTEAM:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis is the overall level of the team comms channel\u003cbr\u003e\u003cstrong\u003eME:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis is the level of the users own voice in their headphones\u003cbr\u003e\u003cbr\u003eLarge controls allow for quick and easy adjustments and a multicolour LED ring around the control indicates the level position\u003cbr\u003eEach control is also a push button that can be used for future developments.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGame Audio Source\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eFor compatibility with multiple tournaments and gaming platforms, there are 5 options of sources for the stereo game audio on the rear panel, which are routed to the GAME headphone level control. Source\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPDIF\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA stereo digital optical TOSLink connection\u003cbr\u003e\u003cstrong\u003eAUX\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIN An analogue stereo input on a 3.5mm (1\/8\") jack socket\u003cbr\u003e\u003cstrong\u003eUSB\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStereo USB audio input on a USB C connection\u003cbr\u003e\u003cstrong\u003eDANTE\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTwo single channel sources are available from the network\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMulti Channel Mix Sources\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDante\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eFrom the Dante\/AES67 network there are 3 stereo inputs available. These can be mixed to 2 channel stereo using the separate GlenController Remote app. Each stereo pair also has a balance control.\u003cbr\u003eTypically only a single stereo pair is used for the game audio, but the further inputs allow for future options and flexibility.\u003c\/p\u003e\n\u003cp\u003eHD-SDI (option)\u003cbr\u003eThe optional HD-SDI connection is de-embedded to provide 4 pairs of stereo audio sources. These can be mixed to 2 channel stereo using the separate GlenController Remote app. Each stereo pair has a balance control. Typically only a single stereo pair is used for the game audio, but the further. inputs allow for future options and flexibility.\u003cbr\u003eThe HD-SDI signal is looped out so the GTM can be used inline of the video signal.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eTeam Mixer\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe top panel TEAM pot adjusts the level of the Team Group Mix to the user.\u003c\/p\u003e\n\u003cp\u003eThe GTM has an internal mixer that generates a team group mix between all members of the same team. This allows all members of the team to be able to communicate with each other.\u003c\/p\u003e\n\u003cp\u003eThere is a multi input, Dante\/AES67 mixer controllable via GlenController that sets the levels of all audio being mixed to the GTM TEAM pot of 1 of 7 teams. Typically this is just a mono mix of the 6 other team members but there are also further sources available:\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFront Panel Connections\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThere are options of connections on the front panel for the user of the GTM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeadset Connection - 3.5mm (1\/8\" jack socket) TRRS\u003c\/strong\u003e\u003cbr\u003eThis allows connection of a typical gaming headset using a single jack for the headphones and microphone. 2.5v or 5v bias can be selected.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMic Input - 3 Pin XLR\u003c\/strong\u003e\u003cbr\u003eFor connecting a professional broadcast grade microphone using a separate 3 pin XLR plug. The input is dynamic with selectable 48v phantom power.  A high performance mic compressor is selectable at 3 levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeadphone Output\u003c\/strong\u003e\u003cbr\u003eThe headphone output is available in parallel via a 3.75mm (1\/4\") and a 2.5mm (1\/8\") jack sockets.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTwo Headphone Amplifiers\u003c\/strong\u003e\u003cbr\u003eThe two headphone outputs and the headset output use independent headphone amplifiers. The game audio and\/or pink noise can be mixed to each output independentely. See the remote control page for further info.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRear Panel Connections\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eSources\u003cbr\u003e\u003c\/strong\u003eThe multiple input sources for the game monitoring are available via the rear panel. The input source can be selected via the push button. This can be locked to prevent local access if required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Gain\u003cbr\u003e\u003c\/strong\u003eThe mic input gain can be adjusted via the rear panel pushbuttons. This can be locked to prevent local access if required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhantom Power \u0026amp; Bias\u003cbr\u003e\u003c\/strong\u003e48V phantom power can be selected, or if using the headset, 2.5V or 5V bias can be used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Connection\u003cbr\u003e\u003c\/strong\u003eTwo network connections are available so a redundant network can be available if required for backup. The GTM is powered via PoE from the network switch or via a midspan PoE injector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHD-SDI (option)\u003cbr\u003e\u003c\/strong\u003eThe HD-SDI input is looped through, so the GTM can be used inline of the video signal. HD-SDI is an option and not on the standard GTM.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGame Integrity Features\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBackground Audio Guard\u003cbr\u003e\u003c\/strong\u003eThe GTM has introduced the Background Audio Guard facility that allows reduction of the background noise by up to 40dB.  There is separate gating at 34 different frequencies, to prevent unwanted arena noise from entering the mic and being shared across the team talk mix and the gamers own headset.  This reduces the possibility of any team gaining a competative advantage from overhearing a potentiall advantagous comment leaking from the mic input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle user eSports interface\u003c\/li\u003e\n\u003cli\u003eMultiple headset connection options\u003c\/li\u003e\n\u003cli\u003eProvides the team talkback mixers\u003c\/li\u003e\n\u003cli\u003eAllows referee interfacing and control\u003c\/li\u003e\n\u003cli\u003eFull remote \u0026amp; Monitoring using Windows 11 App Glencontroller\u003c\/li\u003e\n\u003cli\u003eBackground Audio Guard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic Input Gain Range 60 dBU\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhantom Power 48v\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise 124 dBu (residual @max gain 150 Ohms)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Impedance 16 to 1000 Ohms, (Auto output level to match impedance)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Headphone Output +14.5 dB into 600 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Connector Main HP output on 6.35mm TRS or 3.5mm TRS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadset output on 3.5mm TRRS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBand Pass Filter 20Hz-22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWhite noise generator Can be present on either HP output. Configurable in software\u003c\/li\u003e\n\u003cli\u003eAdditional Audio Inputs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGame input sources Stereo Aux, USB, Optical, Dante, 3G-SDI \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante Yes Primary \u0026amp; Secondary with Broadway IC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67 Compliant Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST-2110-30 Compliant Yes, using Dante Domain Manager\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCopper Ethernet 2 x Neutrik EtherCON connectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFibre Ethernet NO\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudio Sampling Frequency 48kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransfer Rate 1000 Mbps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution 24 bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoE May be powered by the PoE network port\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eComplies to: IEEE 802.3af-\u003c\/li\u003e\n\u003cli\u003eClassification Class 0\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize 135 x 162.5 x 76 mm (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight 0.4Kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMechanics All aluminium construction, anodized and laser etched, powder coated sides\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature 0 to +50 oC (32 to 122 oF)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStorage Temperature -20 to +70 oC (-4°C to 158 oF)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRelative Humidty 0 to 95% non-condensing\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook Available by download\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable 2 metre Cat5 RJ45plug \/RJ45plug cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45113040765007,"sku":"GTM","price":3210.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_ed719299-488b-4335-bbf2-a3f46dd14f7c.jpg?v=1776696749"},{"product_id":"glensound-gtm-sdi-esports-gamers-interface","title":"Glensound GTM SDI eSports Gamers Interface","description":"\u003cp\u003eThe GTM combines the multiple functions required for the interfacing and communications required in eSports tournaments into one simple to use device. GTM provides the interface for the gamers, provides the intercom mix, and allows remote control by tournament engineers. There are separate modes that also mean the GTM can be used by the Coaches, Referees, and arena Announcers.\u003cbr\u003eThe GTM is available in a stripped down version, with no direct top panel controls, for system integrators\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eTop Panel Mixer\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe top panel contains three level controls for the user to adjust their desired mix into their headphones from the following sources:\u003cbr\u003e\u003cstrong\u003eGAME:\u003c\/strong\u003e This is the stereo level of the game audio\u003cbr\u003e\u003cstrong\u003eTEAM:\u003c\/strong\u003e This is the overall level of the team comms channel\u003cbr\u003e\u003cstrong\u003eME:\u003c\/strong\u003e This is the level of the users own voice in their headphones\u003cbr\u003e\u003cbr\u003eLarge controls allow for quick and easy adjustments and a multicolour LED ring around the control indicates the level position\u003cbr\u003eEach control is also a push button that can be used for future developments.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGame Audio Source\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eFor compatibility with multiple tournaments and gaming platforms, there are 5 options of sources for the stereo game audio on the rear panel, which are routed to the GAME headphone level control. Source\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPDIF\u003c\/strong\u003e A stereo digital optical TOSLink connection\u003cbr\u003e\u003cstrong\u003eAUX\u003c\/strong\u003e IN An analogue stereo input on a 3.5mm (1\/8\") jack socket\u003cbr\u003e\u003cstrong\u003eUSB\u003c\/strong\u003e Stereo USB audio input on a USB C connection\u003cbr\u003e\u003cstrong\u003eDANTE\u003c\/strong\u003e Two single channel sources are available from the network\u003cbr\u003e\u003cstrong\u003eSDI\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStereo game audio available from SDI\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMulti Channel Mix Sources\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDante\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eFrom the Dante\/AES67 network there are 3 stereo inputs available. These can be mixed to 2 channel stereo using the separate GlenController Remote app. Each stereo pair also has a balance control.\u003cbr\u003eTypically only a single stereo pair is used for the game audio, but the further inputs allow for future options and flexibility.\u003c\/p\u003e\n\u003cp\u003eHD-SDI\u003cbr\u003eThe HD-SDI connection is de-embedded to provide 4 pairs of stereo audio sources. These can be mixed to 2 channel stereo using the separate GlenController Remote app. Each stereo pair has a balance control. Typically only a single stereo pair is used for the game audio, but the further. inputs allow for future options and flexibility.\u003cbr\u003eThe HD-SDI signal is looped out so the GTM can be used inline of the video signal.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eTeam Mixer\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe top panel TEAM pot adjusts the level of the Team Group Mix to the user.\u003c\/p\u003e\n\u003cp\u003eThe GTM has an internal mixer that generates a team group mix between all members of the same team. This allows all members of the team to be able to communicate with each other.\u003c\/p\u003e\n\u003cp\u003eThere is a multi input, Dante\/AES67 mixer controllable via GlenController that sets the levels of all audio being mixed to the GTM TEAM pot of 1 of 7 teams. Typically this is just a mono mix of the 6 other team members but there are also further sources available:\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFront Panel Connections\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThere are options of connections on the front panel for the user of the GTM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeadset Connection - 3.5mm (1\/8\" jack socket) TRRS\u003c\/strong\u003e\u003cbr\u003eThis allows connection of a typical gaming headset using a single jack for the headphones and microphone. 2.5v or 5v bias can be selected.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMic Input - 3 Pin XLR\u003c\/strong\u003e\u003cbr\u003eFor connecting a professional broadcast grade microphone using a separate 3 pin XLR plug. The input is dynamic with selectable 48v phantom power.  A high performance mic compressor is selectable at 3 levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeadphone Output\u003c\/strong\u003e\u003cbr\u003eThe headphone output is available in parallel via a 3.75mm (1\/4\") and a 2.5mm (1\/8\") jack sockets.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTwo Headphone Amplifiers\u003c\/strong\u003e\u003cbr\u003eThe two headphone outputs and the headset output use independent headphone amplifiers. The game audio and\/or pink noise can be mixed to each output independentely. See the remote control page for further info.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRear Panel Connections\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eSources\u003cbr\u003e\u003c\/strong\u003eThe multiple input sources for the game monitoring are available via the rear panel. The input source can be selected via the push button. This can be locked to prevent local access if required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Gain\u003cbr\u003e\u003c\/strong\u003eThe mic input gain can be adjusted via the rear panel pushbuttons. This can be locked to prevent local access if required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhantom Power \u0026amp; Bias\u003cbr\u003e\u003c\/strong\u003e48V phantom power can be selected, or if using the headset, 2.5V or 5V bias can be used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Connection\u003cbr\u003e\u003c\/strong\u003eTwo network connections are available so a redundant network can be available if required for backup. The GTM is powered via PoE from the network switch or via a midspan PoE injector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHD-SDI \u003cbr\u003e\u003c\/strong\u003eThe HD-SDI input is looped through, so the GTM can be used inline of the video signal. HD-SDI is an option and not on the standard GTM.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGame Integrity Features\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBackground Audio Guard\u003cbr\u003e\u003c\/strong\u003eThe GTM has introduced the Background Audio Guard facility that allows reduction of the background noise by up to 40dB.  There is separate gating at 34 different frequencies, to prevent unwanted arena noise from entering the mic and being shared across the team talk mix and the gamers own headset.  This reduces the possibility of any team gaining a competative advantage from overhearing a potentiall advantagous comment leaking from the mic input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle user eSports interface\u003c\/li\u003e\n\u003cli\u003eMultiple headset connection options\u003c\/li\u003e\n\u003cli\u003eProvides the team talkback mixers\u003c\/li\u003e\n\u003cli\u003eAllows referee interfacing and control\u003c\/li\u003e\n\u003cli\u003eFull remote \u0026amp; Monitoring using Windows 11 App Glencontroller\u003c\/li\u003e\n\u003cli\u003eBackground Audio Guard\u003c\/li\u003e\n\u003cli\u003eIncludes SDI embedder\/de-embedder\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45113045811279,"sku":"GTM SDI","price":4435.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_edf127e4-4ec0-4412-a6cd-f1f3752da874.jpg?v=1776697063"},{"product_id":"glensound-gtm-si-esports-gamers-interface","title":"Glensound GTM SI eSports Gamers Interface","description":"\u003cp\u003eThe GTM-SI combines the multiple functions required for the interfacing and communications required in eSports tournaments into one simple to use device. GTM provides the interface for the gamers, provides the intercom mix, and allows remote control by tournament engineers. There are separate modes that also mean the GTM can be used by the Coaches, Referees, and arena Announcers.\u003c\/p\u003e\n\u003cp\u003eThe GTM-SI is the stripped down version of the GTM, with no direct top panel controls.  It provides the interfacing connections, but control is via the GlenController app.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGlenController Remote Controls\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThere are three level controls to adjust the desired mix into the users headphones from the following sources:\u003cbr\u003e\u003cstrong\u003eGAME:\u003c\/strong\u003e This is the stereo level of the game audio\u003cbr\u003e\u003cstrong\u003eTEAM:\u003c\/strong\u003e This is the overall level of the team comms channel\u003cbr\u003e\u003cstrong\u003eME:\u003c\/strong\u003e This is the level of the users own voice in their headphones\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGame Audio Source\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor compatibility with multiple tournaments and gaming platforms, there are 5 options of sources for the stereo game audio on the rear panel, which are routed to the GAME headphone level control. Source\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPDIF\u003c\/strong\u003e A stereo digital optical TOSLink connection\u003cbr\u003e\u003cstrong\u003eAUX IN\u003c\/strong\u003e An analogue stereo input on a 3.5mm (1\/8\") jack socket\u003cbr\u003e\u003cstrong\u003eUSB\u003c\/strong\u003e Stereo USB audio input on a USB C connection\u003cbr\u003e\u003cstrong\u003eDANTE\u003c\/strong\u003e Two single channel sources are available from the network\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMulti Channel Mix Sources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDante\u003c\/strong\u003e\u003cbr\u003eFrom the Dante\/AES67 network there are 3 stereo inputs available. These can be mixed to 2 channel stereo using the separate GlenController Remote app. Each stereo pair also has a balance control.\u003cbr\u003eTypically only a single stereo pair is used for the game audio, but the further inputs allow for future options and flexibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHD-SDI (option)\u003c\/strong\u003e\u003cbr\u003eThe optional HD-SDI connection is de-embedded to provide 4 pairs of stereo audio sources. These can be mixed to 2 channel stereo using the separate GlenController Remote app. Each stereo pair has a balance control. Typically only a single stereo pair is used for the game audio, but the further. inputs allow for future options and flexibility.\u003cbr\u003eThe HD-SDI signal is looped out so the GTM can be used inline of the video signal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTeam Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TEAM control the level of the Team Group Mix to the user.\u003c\/p\u003e\n\u003cp\u003eThe GTM-SI has an internal mixer that generates a team group mix between all members of the same team. This allows all members of the team to be able to communicate with each other.\u003c\/p\u003e\n\u003cp\u003eThere is a multi input, Dante\/AES67 mixer controllable via GlenController that sets the levels of all audio being mixed to the GTM-SI TEAM output of 1 of 7 teams. Typically this is just a mono mix of the 6 other team members but there are also further sources available:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFront Panel Connections\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are options of connections on the front panel for the user of the GTM-SI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeadset Connection - 3.5mm (1\/8\" jack socket) TRRS\u003c\/strong\u003e\u003cbr\u003eThis allows connection of a typical gaming headset using a single jack for the headphones and microphone. 2.5v or 5v bias can be selected.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMic \u0026amp; Headphone Headset Connection - 5 Pin XLR\u003c\/strong\u003e\u003cbr\u003eFor connecting a headset using a 5 pin XLR plug. The input is dynamic with selectable 48v phantom power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo Headphone Amplifiers\u003c\/strong\u003e\u003cbr\u003eThe two headphone outputs and the headset output use independent headphone amplifiers. The game audio and\/or pink noise can be mixed to each output independentely. See the remote control page for further info.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRear Panel Connections\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSources\u003c\/strong\u003e\u003cbr\u003eThe multiple input sources for the game monitoring are available via the rear panel. The input source can be selected via the push button. This can be locked to prevent local access if required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Gain\u003c\/strong\u003e\u003cbr\u003eThe mic input gain can be adjusted via the rear panel pushbuttons. This can be locked to prevent local access if required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhantom Power \u0026amp; Bias\u003c\/strong\u003e\u003cbr\u003e48V phantom power can be selected, or if using the headset, 2.5V or 5V bias can be used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Connection\u003c\/strong\u003e\u003cbr\u003eTwo network connections are available so a redundant network can be available if required for backup. The GTM-SI is powered via PoE from the network switch or via a midspan PoE injector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHD-SDI (option)\u003c\/strong\u003e\u003cbr\u003eThe HD-SDI input is looped through, so the GTM can be used inline of the video signal. HD-SDI is an option and not on the standard GTM.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGame Integrity Features\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBackground Audio Guard\u003c\/strong\u003e\u003cbr\u003eThe GTM-SI has introduced the Background Audio Guard facility that allows reduction of the background noise by up to 40dB.  There is separate gating at 34 different frequencies, to prevent unwanted arena noise from entering the mic and being shared across the team talk mix and the gamers own headset.  This reduces the possibility of any team gaining a competative advantage from overhearing a potentiall advantagous comment leaking from the mic input.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGTM-SI\/R\u003c\/strong\u003e\u003cbr\u003eWe have produced a sepertate custom version of the GTM-SI called the GTM-SI\/R.  On this version, Dante inputs 1-4 are fed directly to HP\/L, HP\/R, TRRS\/L, TRRS\/R, and entirely bypasses the headphone mix controls.  Therefore when using a GTM-SI\/R the headphone mix functions on GlenController have no affect.  Background audio guard is also bypassed.  In GlenController they display 'variant = 1' in the device information panel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle user eSports interface\u003c\/li\u003e\n\u003cli\u003eMultiple headset connection options\u003c\/li\u003e\n\u003cli\u003eProvides the teamtalkback mixers\u003c\/li\u003e\n\u003cli\u003eAllows referee interfacing and control\u003c\/li\u003e\n\u003cli\u003eFull remote \u0026amp; Monitoring using Windows 11 App Glencontroller\u003c\/li\u003e\n\u003cli\u003eBackground Audio Guard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45113049677903,"sku":"GTM SI","price":3075.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_04f46e02-e0bf-4348-a114-a5970b17eb55.jpg?v=1776697394"},{"product_id":"glensound-gtm-mobile-esports-gamers-interface","title":"Glensound GTM MOBILE eSports Gamers Interface","description":"\u003cp\u003eThe GTM Mobile combines the multiple functions required for the interfacing and communications required in eSports tournaments into one simple to use device. GTM Mobile enhances the standard GTM with the addition of features specifically designed for mobile phone games.  GTM provides the interface for the gamers, provides the intercom mix, and allows remote control by tournament engineers. There are separate modes that also mean the GTM can be used by the Coaches, Referees, and arena Announcers.\u003c\/p\u003e\n\u003cp\u003eThe GTM is available in a stripped down version, with no direct top panel controls, for system integrators\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMobile Phone Support\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA USB to Ethernet adapter is included allowing bi-directional data between an Android phone and the GTM Mobile over the USB C cable.  This is important so that in large tournaments, you have a more reliable cable connection rather than a reliance on wi-fi.\u003cbr\u003e\u003cbr\u003eAs mobile games are often a high power drain on the battery, the GTM Mobile includes high power USB C charging via the same USB C cable, when the GTM Mobile is connected to a PoE++ switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTop Panel Mixer\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe top panel contains three level controls for the user to adjust their desired mix into their headphones from the following sources:\u003cbr\u003e\u003cstrong\u003eGAME:\u003c\/strong\u003e This is the stereo level of the game audio\u003cbr\u003e\u003cstrong\u003eTEAM:\u003c\/strong\u003e This is the overall level of the team comms channel\u003cbr\u003e\u003cstrong\u003eME:\u003c\/strong\u003e This is the level of the users own voice in their headphones\u003cbr\u003e\u003cbr\u003eLarge controls allow for quick and easy adjustments and a multicolour LED ring around the control indicates the level position\u003cbr\u003eEach control is also a push button that can be used for future developments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGame Audio Source\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eFor compatibility with multiple tournaments and gaming platforms, there are 5 options of sources for the stereo game audio on the rear panel, which are routed to the GAME headphone level control. Source\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPDIF\u003c\/strong\u003e   A stereo digital optical TOSLink connection\u003cbr\u003e\u003cstrong\u003eAUX     \u003c\/strong\u003e IN An analogue stereo input on a 3.5mm (1\/8\") jack socket\u003cbr\u003e\u003cstrong\u003eUSB\u003c\/strong\u003e      Stereo USB audio input on a USB C connection. On a mobile phone there is 1x stereo input. On a PC this is 2x stereo                inputs.\u003cbr\u003e\u003cstrong\u003eDANTE\u003c\/strong\u003e Two single channel sources are available from the network\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMulti Channel Mix Sources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDante\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eFrom the Dante\/AES67 network there are 3 stereo inputs available. These can be mixed to 2 channel stereo using the separate GlenController Remote app. Each stereo pair also has a balance control.\u003cbr\u003eTypically only a single stereo pair is used for the game audio, but the further inputs allow for future options and flexibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTeam Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe top panel TEAM pot adjusts the level of the Team Group Mix to the user.\u003c\/p\u003e\n\u003cp\u003eThe GTM has an internal mixer that generates a team group mix between all members of the same team. This allows all members of the team to be able to communicate with each other.\u003c\/p\u003e\n\u003cp\u003eThere is a multi input, Dante\/AES67 mixer controllable via GlenController that sets the levels of all audio being mixed to the GTM TEAM pot of 1 of 7 teams. Typically this is just a mono mix of the 6 other team members but there are also further sources available:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFront Panel Connections\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are options of connections on the front panel for the user of the GTM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeadset Connection - 3.5mm (1\/8\" jack socket) TRRS\u003c\/strong\u003e\u003cbr\u003eThis allows connection of a typical gaming headset using a single jack for the headphones and microphone. 2.5v or 5v bias can be selected.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadset Connection - 4 or 5 pin XLR (can be specified)\u003c\/strong\u003e\u003cbr\u003eFor connection of combined mic\/headphone headsets, often aviation style.  This can be specified as 4 or 5 pin. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMic Input - 3 Pin XLR\u003c\/strong\u003e\u003cbr\u003eFor connecting a professional broadcast grade microphone using a separate 3 pin XLR plug. The input is dynamic with selectable 48v phantom power.  A high performance mic compressor is selectable at 3 levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeadphone Output\u003c\/strong\u003e\u003cbr\u003eThe headphone output is available in parallel via a 3.75mm (1\/4\") and a 2.5mm (1\/8\") jack sockets.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTwo Headphone Amplifiers\u003c\/strong\u003e\u003cbr\u003eThe two headphone outputs and the headset output use independent headphone amplifiers. The game audio and\/or pink noise can be mixed to each output independentely. See the remote control page for further info.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRear Panel Connections\u003cbr\u003e\u003cbr\u003eSources\u003cbr\u003e\u003c\/strong\u003eThe multiple input sources for the game monitoring are available via the rear panel. The input source can be selected via the push button. This can be locked to prevent local access if required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Gain\u003cbr\u003e\u003c\/strong\u003eThe mic input gain can be adjusted via the rear panel pushbuttons. This can be locked to prevent local access if required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhantom Power \u0026amp; Bias\u003cbr\u003e\u003c\/strong\u003e48V phantom power can be selected, or if using the headset, 2.5V or 5V bias can be used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Connection\u003cbr\u003e\u003c\/strong\u003eTwo network connections are available so a redundant network can be available if required for backup. The GTM is powered via PoE from the network switch or via a midspan PoE injector.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSB Connection to Computer\u003c\/strong\u003e\u003cbr\u003eThe GTM Mobile also includes an enhanced PC USB interface.  There are 2 pairs of audio channels available from the PC for monitoring.  The GTM Mobile can also be powered from the PC when connected to a USB C with PD.  Please note that in this mode, mobile phone charging is not available unless the PoE port has PoE++ power..\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGame Integrity Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBackground Audio Guard\u003cbr\u003e\u003c\/strong\u003eThe GTM has introduced the Background Audio Guard facility that allows reduction of the background noise by up to 50dB.  There is separate gating at 34 different frequencies, to prevent unwanted arena noise from entering the mic and being shared across the team talk mix and the gamers own headset.  This reduces the possibility of any team gaining a competative advantage from overhearing a potentiall advantagous comment leaking from the mic input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle user eSports interface\u003c\/li\u003e\n\u003cli\u003eData and charging interface to USB C mobile phones\u003c\/li\u003e\n\u003cli\u003eMultiple headset connection options\u003c\/li\u003e\n\u003cli\u003eProvides the team talkback mixers\u003c\/li\u003e\n\u003cli\u003eFull remote \u0026amp; Monitoring using Windows 11 App Glencontroller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic Input Gain Range 60 dBU\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhantom Power 48v.  2.5V and 5V also available for headsets\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise 124 dBu (residual @max gain 150 Ohms)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Impedance 16 to 1000 Ohms, (Auto output level to match impedance)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Headphone Output +14.5 dB into 600 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Connector Main HP output on 6.35mm TRS or 3.5mm TRS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadset output on 3.5mm TRRS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBand Pass Filter 20Hz-22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWhite noise generator Can be present on either HP output. Configurable in software\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eADDITIONAL AUDIO IMPUTS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGame input sources Stereo Aux, USB, Optical, Dante\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante Yes Primary \u0026amp; Secondary with Broadway IC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67 Compliant Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST-2110-30 Compliant Yes, using Dante Domain Manager\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCopper Ethernet 2 x Neutrik EtherCON connectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFibre Ethernet NO\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudio Sampling Frequency 48kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransfer Rate 1000 Mbps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution 24 bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoE May be powered by the PoE network port\u003c\/li\u003e\n\u003cli\u003eComplies to: IEEE 802.3af-\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eClassification Class 0\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePoE++ require for USB C mobile phone charging\u003c\/li\u003e\n\u003cli\u003eCONSUMPTION\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize 155 x 163 x 85 mm (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight 1.1Kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMechanics All aluminium construction, anodized and laser etched, powder coated sides\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature 0 to +50 oC (32 to 122 oF)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStorage Temperature -20 to +70 oC (-4°C to 158 oF)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRelative Humidty 0 to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHONE CONNECTION\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTYPE USB C, ANDROID only\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRatings 15 Watts, 5V 3A Source, 5V 3A Sink\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook Available by download\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable 2 metre Cat5 RJ45plug \/RJ45plug cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45113151979599,"sku":"GTM MOBILE","price":4492.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_67424f40-d6c6-4fa4-b97a-ccc6e57d13eb.jpg?v=1776698776"},{"product_id":"glensound-gtm-diamond-limited-60th-anniversary-edition","title":"Glensound GTM DIAMOND Limited 60th Anniversary Edition","description":"\u003cp\u003eThe GTM Diamond is the limited edition version of the GTM to celebrate 60 years of Glensound.  Available in a limited edition run of 60 units, the GTM Diamond features over 4000 original Swarovski crsytals, hand placed to create a visually stunning eSports centre piece.\u003cbr\u003e\u003cbr\u003eThe GTM Diamond combines the multiple functions required for the interfacing and communications required in eSports tournaments into one simple to use device. GTM Diamond provides the interface for the gamers, provides the intercom mix, and allows remote control by tournament engineers. There are separate modes that also mean the GTM Diamond can be used by the Coaches, Referees, and arena Announcers.\u003cbr\u003eThe GTM Diamond is available in a stripped down version, with no direct top panel controls, for system integrators\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTop Panel Mixer\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe top panel contains three level controls for the user to adjust their desired mix into their headphones from the following sources:\u003cbr\u003e\u003cstrong\u003eGAME:\u003c\/strong\u003e This is the stereo level of the game audio\u003cbr\u003e\u003cstrong\u003eTEAM:\u003c\/strong\u003e This is the overall level of the team comms channel\u003cbr\u003e\u003cstrong\u003eME:\u003c\/strong\u003e This is the level of the users own voice in their headphones\u003cbr\u003e\u003cbr\u003eLarge controls allow for quick and easy adjustments and a multicolour LED ring around the control indicates the level position\u003cbr\u003eEach control is also a push button that can be used for future developments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGame Audio Source\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eFor compatibility with multiple tournaments and gaming platforms, there are 5 options of sources for the stereo game audio on the rear panel, which are routed to the GAME headphone level control. Source\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPDIF\u003c\/strong\u003e A stereo digital optical TOSLink connection\u003cbr\u003e\u003cstrong\u003eAUX\u003c\/strong\u003e IN An analogue stereo input on a 3.5mm (1\/8\") jack socket\u003cbr\u003e\u003cstrong\u003eUSB\u003c\/strong\u003e Stereo USB audio input on a USB C connection\u003cbr\u003e\u003cstrong\u003eDANTE\u003c\/strong\u003e Two single channel sources are available from the network\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMulti Channel Mix Sources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDante\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eFrom the Dante\/AES67 network there are 3 stereo inputs available. These can be mixed to 2 channel stereo using the separate GlenController Remote app. Each stereo pair also has a balance control.\u003cbr\u003eTypically only a single stereo pair is used for the game audio, but the further inputs allow for future options and flexibility.\u003c\/p\u003e\n\u003cp\u003eHD-SDI (option)\u003cbr\u003eThe optional HD-SDI connection is de-embedded to provide 4 pairs of stereo audio sources. These can be mixed to 2 channel stereo using the separate GlenController Remote app. Each stereo pair has a balance control. Typically only a single stereo pair is used for the game audio, but the further. inputs allow for future options and flexibility.\u003cbr\u003eThe HD-SDI signal is looped out so the GTM can be used inline of the video signal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTeam Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe top panel TEAM pot adjusts the level of the Team Group Mix to the user.\u003c\/p\u003e\n\u003cp\u003eThe GTM Diamond has an internal mixer that generates a team group mix between all members of the same team. This allows all members of the team to be able to communicate with each other.\u003c\/p\u003e\n\u003cp\u003eThere is a multi input, Dante\/AES67 mixer controllable via GlenController that sets the levels of all audio being mixed to the GTM Diamond TEAM pot of 1 of 7 teams. Typically this is just a mono mix of the 6 other team members but there are also further sources available:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFront Panel Connections\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are options of connections on the front panel for the user of the GTM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeadset Connection - 3.5mm (1\/8\" jack socket) TRRS\u003c\/strong\u003e\u003cbr\u003eThis allows connection of a typical gaming headset using a single jack for the headphones and microphone. 2.5v or 5v bias can be selected.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMic Input - 3 Pin XLR\u003c\/strong\u003e\u003cbr\u003eFor connecting a professional broadcast grade microphone using a separate 3 pin XLR plug. The input is dynamic with selectable 48v phantom power.  A high performance mic compressor is selectable at 3 levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeadphone Output\u003c\/strong\u003e\u003cbr\u003eThe headphone output is available in parallel via a 3.75mm (1\/4\") and a 2.5mm (1\/8\") jack sockets.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTwo Headphone Amplifiers\u003c\/strong\u003e\u003cbr\u003eThe two headphone outputs and the headset output use independent headphone amplifiers. The game audio and\/or pink noise can be mixed to each output independentely. See the remote control page for further info.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRear Panel Connections\u003cbr\u003e\u003cbr\u003eSources\u003cbr\u003e\u003c\/strong\u003eThe multiple input sources for the game monitoring are available via the rear panel. The input source can be selected via the push button. This can be locked to prevent local access if required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Gain\u003cbr\u003e\u003c\/strong\u003eThe mic input gain can be adjusted via the rear panel pushbuttons. This can be locked to prevent local access if required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhantom Power \u0026amp; Bias\u003cbr\u003e\u003c\/strong\u003e48V phantom power can be selected, or if using the headset, 2.5V or 5V bias can be used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Connection\u003cbr\u003e\u003c\/strong\u003eTwo network connections are available so a redundant network can be available if required for backup. The GTM is powered via PoE from the network switch or via a midspan PoE injector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHD-SDI (option)\u003cbr\u003e\u003c\/strong\u003eThe HD-SDI input is looped through, so the GTM can be used inline of the video signal. HD-SDI is an option and not on the standard GTM Diamond.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGame Integrity Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBackground Audio Guard\u003cbr\u003e\u003c\/strong\u003eThe GTM Diamond has introduced the Background Audio Guard facility that allows reduction of the background noise by up to 40dB.  There is separate gating at 34 different frequencies, to prevent unwanted arena noise from entering the mic and being shared across the team talk mix and the gamers own headset.  This reduces the possibility of any team gaining a competative advantage from overhearing a potentiall advantagous comment leaking from the mic input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic Input Gain Range 60 dBU\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhantom Power 48v\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise 124 dBu (residual @max gain 150 Ohms)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Impedance 16 to 1000 Ohms, (Auto output level to match impedance)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Headphone Output +14.5 dB into 600 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Connector Main HP output on 6.35mm TRS or 3.5mm TRS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadset output on 3.5mm TRRS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBand Pass Filter 20Hz-22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWhite noise generator Can be present on either HP output. Configurable in software\u003c\/li\u003e\n\u003cli\u003eAdditional Audio Inputs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGame input sources Stereo Aux, USB, Optical, Dante, 3G-SDI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante Yes Primary \u0026amp; Secondary with Broadway IC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67 Compliant Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST-2110-30 Compliant Yes, using Dante Domain Manager\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCopper Ethernet 2 x Neutrik EtherCON connectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFibre Ethernet NO\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudio Sampling Frequency 48kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransfer Rate 1000 Mbps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution 24 bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoE May be powered by the PoE network port\u003c\/li\u003e\n\u003cli\u003eComplies to: IEEE 802.3af-\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eClassification Class 0\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize 135 x 162.5 x 76 mm (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight 0.4Kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMechanics All aluminium construction, anodized and laser etched, powder coated sides\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature 0 to +50 oC (32 to 122 oF)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStorage Temperature -20 to +70 oC (-4°C to 158 oF)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRelative Humidty 0 to 95% non-condensing\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook Available by download\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable 2 metre Cat5 RJ45plug \/RJ45plug cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45113157615695,"sku":"GTM DIAMOND","price":13780.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_ad0b30cd-7087-4df5-9d90-650a9d345ac3.jpg?v=1776699189"},{"product_id":"glensound-howl-32-32-channels-of-network-audio-feedback-protection","title":"Glensound HOWL 32 32 Channels Of Network Audio Feedback Protection","description":"\u003cp\u003eThe Glensound HOWL32 is a high density frequency shifter for preventing audio feedback across Dante and AES67 audio networks. It can be fitted with a maximum of 4 independent frequency shifter cards. Each of these cards provides 32 audio inputs and 32 frequeency shifted audio outputs from the network.\u003c\/p\u003e\n\u003cp\u003eThere are no user controls on the HOWL32 as the frequency shift function is preset - what comes in, goes back at less 5Hz.  This function means that if you route a mic audio input via the HOWL32, you will significantly reduce the liklihood of acoustic feedback.\u003cbr\u003e\u003cbr\u003eEvery frequency input has a 5Hz fixed offset for, example, 1 kHz in → 995 Hz out.  So the signal coming back to the mic is never at exactly the same frequency as what left it.  That means the system can’t 'lock onto' a single resonant frequency and build a continous howl, as the potential feedback frequency keeps reducing.\u003c\/p\u003e\n\u003cp\u003eBeing designed for 24\/7 broadcast operation, each module on the HOWL32 features redundant network interfaces.  Both primary and secondary network interfaces are available on copper Ethernet and SFP module slots for fibre.  Redundant power is available via dual AC IEC connections.\u003c\/p\u003e\n\u003cp\u003eDante network audio is a common protocol for distributing high quality linear audio over standard IP networks and it is widely used by many audio equipment manufacturers. The Glensound HOWL32 Frequency Shifter will be compatible with any other manufacturers' Dante audio interface. Further details of Dante network audio can be found at www.audinate.com\u003c\/p\u003e\n\u003cp\u003eAlso Available in AES67\/Ravenna version\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNetwork audio feedback protection\u003c\/li\u003e\n\u003cli\u003e32 channels\u003c\/li\u003e\n\u003cli\u003eEach channel frequency shifted down by 5Hz\u003c\/li\u003e\n\u003cli\u003ePrimary and redundant Ethernet on copper and SFP fibre\u003c\/li\u003e\n\u003cli\u003eTwin power supply \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical Interface: 2 x Copper Neutrik Ethercon\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 x SFP (Fibre GBIC) Slots (SFP modules not included)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudio Sample Frequency: Up to 48k\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransfer Rate: 1000 Mbps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudio inputs \u0026amp; outputs are entirely digital fed via the digital network. Internally audio is processed in a DSP with 32 bit resolution. Performance is expected to be completely flat and noise free. We cannot measure it as its performance exceeds the range of our test equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 19” 1RU, 30cm deep\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 2.8Kg (1 mix card fitted)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Carton: Rugged export quality cardboard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Size: 62 x 42 x 12 cms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 4.5Kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuantity of Inputs: 2\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysical Connection: IEC socket\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType of Input: Fully redundant\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 100 – 240 VAC +\/-10%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency: 50 – 60 Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption: 14 Watts (1 x mix card fitted) then add 2 Watts for each extra card\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature: 0 to +50°C (32 to 122°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70°C (-4 to 158°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 0 to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRJ45 Cable: 2 of per mix card fitted\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMains Cable: 2 of (UK \u0026amp; Europe only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK OPTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDANTE\/AES67 VERSION\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSample Frequency: 48K\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution: 24 Bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; Routing: Via Free Dante Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Can be configured for AES67\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRAVENNA\/AES67 VERSION\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical: 2 x Neutrik Ethercons Cat6 RJ45s \u0026amp; 2 x SFP slots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: Fully redundant primary \u0026amp; secondary circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67: Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Sample Rates: 44.1kHz - 192kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePTPv2: Master or Slave, IEEE-1588-2008 standard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST 2110-30: Yes. Including level C and CX\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST2022-7: Yes. Seamless data switching\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNMOS IS-04 (Disovery): Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNMOS IS-05 Routing): Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemote Control: Web browser or Anem\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45113164693583,"sku":"HOWL 32","price":2640.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_f3b4d582-1736-4d8a-9227-957d6429ec0e.jpg?v=1776699625"},{"product_id":"glensound-virgil-dante-studio-headphone-amplifier","title":"Glensound VIRGIL Dante Studio Headphone Amplifier","description":"\u003cp\u003eVirgil was the Roman poet who guided Dante through Hell and Purgatory; the Glensound Virgil is a clever little headphone amplifier for providing crystal clear audio into studio \u0026amp; broadcast headphones.\u003c\/p\u003e\n\u003cp\u003ePackaged in a small \u0026amp; robust format and designed to be permanently mounted in studios wherever a headphone circuit is required, the Virgil provides a simple interface between Dante network audio systems and users' headphones.\u003c\/p\u003e\n\u003cp\u003eThe Virgil encompasses our unique headphone amplifier circuit which automatically provides the correct output level to match the impedance of the attached headphones (to produce the same volume high impedance headphones require a much greater output level than low impedance).\u003c\/p\u003e\n\u003cp\u003eVirgil receives 2 x audio circuits from a Dante network and routes one to the left and the other to the right channel of the headphone amplifier. A front panel volume control allows the user to adjust the output volume.\u003c\/p\u003e\n\u003cp\u003eThree mounting holes are supplied to enable the Virgil to be mounted underneath a studio desk in a suitable location for the user's headphones. Needing just 1 single network cable to carry both power \u0026amp; audio to the Virgil makes installation very simple.\u003c\/p\u003e\n\u003cp\u003eAs well as being suitable for low \u0026amp; high impedance headphones our unique headphone amplifier circuit can be connected to both stereo headphones \u0026amp; mono earpieces, making the Virgil suitable for driving television presenters' ear pieces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante audio input\u003c\/li\u003e\n\u003cli\u003eStereo headphone amplifier\u003c\/li\u003e\n\u003cli\u003eCan be used with mono earpieces\u003c\/li\u003e\n\u003cli\u003eUnder desk mounting\u003c\/li\u003e\n\u003cli\u003eSmall \u0026amp; robust\u003c\/li\u003e\n\u003cli\u003ePowered by PoE\u003c\/li\u003e\n\u003cli\u003e6.35 \u0026amp; 3.5mm headphone outputs\u003c\/li\u003e\n\u003cli\u003eUp to 96K\/ 24 bit audio\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAudio\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeadphone impedance: 32 to 1000 Ohms\u003c\/li\u003e\n\u003cli\u003eMaximum output level: +15.8dB into 600 Ohms\u003c\/li\u003e\n\u003cli\u003eHeadphone jacks: 1 x 6.35mm (1\/4\") and 1 x 3.5mm stereo 3 pole sockets\u003c\/li\u003e\n\u003cli\u003eFront panel level pot range: -20 to + 10dB standard (-70 to + 10dB special order)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: \u0026gt;-0.1dB 20Hz to 22kHz\u003c\/li\u003e\n\u003cli\u003eDistortion: \u0026lt;0.008% @ 1kHz (ref +8dBu)\u003c\/li\u003e\n\u003cli\u003eNoise: \u0026lt; -73dB @ line up (22Hz to 22kHz)\u003c\/li\u003e\n\u003cli\u003eOutput Power: 1 Watt\u003c\/li\u003e\n\u003cli\u003eNo of Circuits: 2 off inputs, 1 routed left ear other routed right ear \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax current consumption: 2 Watts\u003c\/li\u003e\n\u003cli\u003ePowered by Power Over Ethernet (PoE)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDante Network Interface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSample frequency: Up to 96kHz\u003c\/li\u003e\n\u003cli\u003eResolution: 24 bit\u003c\/li\u003e\n\u003cli\u003eLine up: 0dBu = -18dBFs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e86.61mm wide\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e32.23mm high\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e104.31mm deep \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e220g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45113170395215,"sku":"VIRGIL","price":680.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_14274a9e-e38d-4744-a82d-068243687044.jpg?v=1776700418"},{"product_id":"glensound-virgil-bc-stereo-dante-headphone-amp-with-belt-clip","title":"Glensound VIRGIL BC Stereo Dante Headphone Amp With Belt Clip","description":"\u003cp\u003eVirgil was the Roman poet who guided Dante through Hell and Purgatory, the Glensound Virgil is a clever little headphone amplifier for providing crystal clear audio into studio \u0026amp; broadcast headphones.\u003c\/p\u003e\n\u003cp\u003ePackaged in a small \u0026amp; robust format and designed to be permanently mounted in studios wherever a headphone circuit is required, the Virgil provides a simple interface between Dante network audio systems and users headphones.\u003c\/p\u003e\n\u003cp\u003eThe Virgil encompasses our unique headphone amplifier circuit which automatically provides the correct output level to match the impedance of the attached headphones (to produce the same volume high impedance headphones require a much greater output level than low impedance).\u003c\/p\u003e\n\u003cp\u003eVirgil receives 2 x audio circuits from a Dante network and routes one to the left and the other to the right channel of the headphone amplifier. A front panel volume control allows the user to adjust the output volume.\u003c\/p\u003e\n\u003cp\u003eThree mounting holes are supplied to enable the Virgil to be mounted underneath a studio desk in a suitable location for the users headphones. Needing just 1 single network cable to carry both power \u0026amp; audio to the Virgil makes installation very simple.\u003c\/p\u003e\n\u003cp\u003eAs well as being suitable for low \u0026amp; high impedance headphones our unique headphone amplifier circuit can be connected to both stereo headphones \u0026amp; mono earpieces, making the Virgil suitable for driving television presenters ear pieces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante audio input\u003c\/li\u003e\n\u003cli\u003eStereo headphone amplifier\u003c\/li\u003e\n\u003cli\u003eCan be used with mono earpieces\u003c\/li\u003e\n\u003cli\u003eUnder desk mounting\u003c\/li\u003e\n\u003cli\u003ePowered by PoE\u003c\/li\u003e\n\u003cli\u003e6.35 \u0026amp; 3.5mm headphone outputs\u003c\/li\u003e\n\u003cli\u003eIncludes belt clip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAudio\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeadphone impedance: 32 to 1000 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum output level: +15.8dB into 600 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone jacks: 1 x 6.35mm (1\/4\") and 1 x 3.5mm stereo 3 pole sockets\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFront panel level pot range: -20 to + 10dB standard (-70 to + 10dB special order)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency Response: \u0026gt;-0.1dB 20Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDistortion: \u0026lt;0.008% @ 1kHz (ref +8dBu)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNoise: \u0026lt; -73dB @ line up (22Hz to 22kHz)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput Power: 1 watt\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo of Circuits: 2 off inputs, 1 routed left ear other routed right ear \u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax current consumption: 2 watts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePowered by Power Over Ethernet (PoE)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDante Network Interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSample frequency: Up to 96kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution: 24 bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine up: 0dBu = -18dBFs\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e86.61mm wide\u003c\/li\u003e\n\u003cli\u003e32.23mm high\u003c\/li\u003e\n\u003cli\u003e104.31mm deep \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e220g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45113174917199,"sku":"VIRGIL BC","price":699.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_ea36dc05-f1d2-44c7-ba48-1f7e829abe5c.jpg?v=1776700884"},{"product_id":"glensound-virgil-ob-dante-aes67-headphone-amplifier-with-local-analogue-outputs","title":"Glensound VIRGIL OB Dante\/ AES67 Headphone Amplifier With Local Analogue Outputs","description":"\u003cp\u003eVirgil was the Roman poet who guided Dante through Hell and Purgatory, the Glensound Virgil OB is a clever little headphone amplifier for providing crystal clear audio into studio \u0026amp; broadcast headphones.\u003c\/p\u003e\n\u003cp\u003ePackaged in a small \u0026amp; robust format and designed for outside broadcast \u0026amp; theatre applications wherever a headphone circuit or analogue output is required, the Virgil OB provides a simple interface between Dante \/ AES67 network audio systems and users headphones or other analogue audio equipment.\u003c\/p\u003e\n\u003cp\u003eThe Virgil OB encompasses our unique headphone amplifier circuit which automatically provides the correct output level to match the impedance of the attached headphones (to produce the same volume high impedance headphones require a much greater output level than low impedance).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVirgil OB receives 2 x audio circuits from a Dante \/ AES67 network and routes one to the left and the other to the right channel of the headphone amplifier. A front panel volume control allows the user to adjust the output volume of the headphones.\u003c\/li\u003e\n\u003cli\u003eThe 2 incoming audio circuits are also presented on a pair of balanced analogue audio XLRs on the rear of the unit. A switch on the side of the unit sets these 2 outputs to be post or pre fade of the front panel level control.\u003c\/li\u003e\n\u003cli\u003eThe Virgil OB is housed in a robust but lightweight aluminium casing that has been proven to  withstand the rigours of life on the road. It also features a hardwearing beltclip allowing the unit to be quickly and securely attached to both people and infrastructure.\u003c\/li\u003e\n\u003cli\u003eAs well as being suitable for low \u0026amp; high impedance headphones our unique headphone amplifier circuit can be connected to both stereo headphones \u0026amp; mono earpieces, making the Virgil OB suitable for driving television presenters ear pieces.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe USB port is for firmware upgrades only and should not be used for power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeadphone Impedance: 32 to 1000 Ohms (auto output level to match impedance)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Headphone Output: +15.8dB into 600 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Frequency Response: \u0026gt;=-0.1dB 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Noise: -74dB @ lineup (residual noise)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone THD + Noise: 0.008% @ 1kHz (ref = +8dBu)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeadphone Volume Pot Range\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+10dB to -20dB (standard)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e+10dB to Off (to special order)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput Power: 1 Watt\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone Jacks: 1 x 6.35mm (1\/4\") and 1 x 3.5mm Stereo Sockets\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable for both stereo \u0026amp; mono headphones\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudio Inputs: 2 off, 1 routed left, 1 routed right\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBalanced Output Impedance: =Maximum Balanced Output Level: +18dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDigital Line Up: -18dBFs = 0dBu\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBalanced Output Frequency Response: \u0026gt;=-0.1dB 22Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBalanced Output Noise: -74dB @ lineup (residual noise)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBalanced Output THD \u0026amp; Noise: 0.008% @ 1kHz (ref +8dBu)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOTHER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante\/ AES67 Network Interface: \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSample Frequency: 48 - 96kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution: 24 bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDante V4 DDM Certified\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 42 x 101 x 103mm (H x W x D)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 200g\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Input: Power Over Ethernet (PoE) only. USB socket should not be used for power.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45113188450383,"sku":"VIRGIL OB","price":818.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_afaed12c-ac90-4fc3-854f-0b86ebbc16b9.jpg?v=1776701325"},{"product_id":"glensound-virgil-d2p-twin-dante-desktop-headphone-amplifier","title":"Glensound VIRGIL D2P Twin Dante Desktop Headphone Amplifier","description":"\u003cp\u003eThe D2P is a headphone monitoring solution when two users sit next to each other and need to monitor one or two stereo sources.  The two stereo sources come from the Dante\/AES67 network and can be mixed for monitoring.  Each of the stereo inputs can be routed to either headphone amp or both.  This allows the users of a D2P to share the same stereo mix, or just monitor an induvial stereo input each.  Each user also has their own mute button. \u003c\/p\u003e\n\u003cp\u003eThe D2P features Glensound’s auto impedance load balancing system to allow consistent gain ranges across the pot when using headphones between 32-1000 ohms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo independent stereo headphone amplifiers:\u003c\/li\u003e\n\u003cli\u003eHeadphone Impedance: 32 - 1000 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax output level:+15.5dBu into 600 Ohms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeadphone connectors:6.35mm TRS or 3.5mm TRS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePot Range:-80dB to 0dB\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency response:0.2dB 20Hz to 22kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNoise:-83dBu @ 0dBu output (into 600R)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDante:Yes - UltimoX4 based\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67 Compliant:Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMPTE ST-2110-30 Compliant:No\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCopper ethernet:Neutrik EtherCON connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFibre ethernet:No\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudio Sampling Frequency:44.1kHz \u0026amp; 48kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransfer rate:100Mbps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution:24 bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine up:0dBu = -18dBFs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoE powered\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eComplies to IEE 802.3af\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eClassification Class 0\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption:Typical = 2W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize:150mm x 171mm x 81mm (WxDxH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMechanics:Aluminium construction, anodized and laser etched, powder coated sides\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45113192218703,"sku":"VIRGIL D2P","price":1125.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_aa50bff7-016d-496f-a1d2-358d3484e1e8.jpg?v=1776701684"},{"product_id":"glensound-beatrice-b1-4m-1-channel-ultra-compact-beltpack","title":"Glensound Beatrice B1\/4M 1 Channel Ultra Compact Beltpack","description":"\u003cp\u003e\u003cspan\u003eUltra Compact, Robust, Portable Single Channel Beltpack Intercom. Utilizes Dante Network Audio Transmission. Fully Compatible With Other Manufacturers’ Equipment Using The Dante Protocol. AES67 Compliant\u003c\/span\u003e\u003c\/p\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45113213681743,"sku":"Beatrice B1\/4M","price":1015.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/beatrice_b14m_frontview_1.webp?v=1776701930"},{"product_id":"glensound-beatrice-b2-4m-2-channel-ultra-compact-beltpack","title":"Glensound Beatrice B2\/4M 2 Channel Ultra Compact Beltpack","description":"\u003cp\u003e\u003cspan\u003eUltra Compact, Robust, Portable Two Channel Beltpack Intercom. Utilizes Dante Network Audio Transmission Protocol To Allow Real Time Distribution Of Uncompressed Audio Across Standard Ethernet Networks. Fully Compatible With Other Manufacturers’ Equipment Using The Dante Protocol. AES67 Compliant\u003c\/span\u003e\u003c\/p\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45113219940431,"sku":"Beatrice B2\/4M","price":1084.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/beatrice_b24m_frontview_1.webp?v=1776702811"},{"product_id":"glensound-beatrice-b4-4m-4-channel-beltpack","title":"Glensound Beatrice B4\/4M 4 Channel Beltpack","description":"\u003cp\u003e\u003cspan\u003eRobust, 4 Channel Beltpack Intercom. Utilizes Dante Network Fully Compatible With Other Manufacturers’ Equipment Using The Dante Protocol. AES67 Compliant\u003c\/span\u003e\u003c\/p\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45113231310927,"sku":"Beatrice B4\/4M","price":1280.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/beatrice_b44m_frontview_1.webp?v=1776703339"},{"product_id":"glensound-beatrice-b4-4m-compact-4-channel-beltpack-dante-broadway-design-with-4pin-xlr-male","title":"Glensound Beatrice B4+\/4M Compact 4 Channel Beltpack Dante Broadway Design With 4pin XLR Male","description":"\u003cp\u003e\u003cspan\u003eUltra Compact Unit With 4 X FW \u0026amp; 4 X IFBs To The Dante\/AES67 Network. Interface With 4 Completely Separate Network Locations. Four Separate Talk Buttons Route The Microphone Input To Either Of The 4 Network Outputs. 3 Pin XLR Mic Input And Features Gain Adjust And 48V Phantom Power. Each Input Has A Separate Level Control And Signal Present Indicator\u003c\/span\u003e\u003c\/p\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45131465654351,"sku":"Beatrice B4+\/4M","price":1684.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/beatrice_b4_4m_frontview_1.webp?v=1776884219"},{"product_id":"glensound-beatrice-p1-phone-handset-dante-network-intercom","title":"Glensound Beatrice P1 Phone Handset Dante Network Intercom","description":"\u003cp\u003eThe Beatrice P1 is a one channel handset.\u003c\/p\u003e\n\u003cp\u003eThe user of the handset on the P1 can listen to one audio feed from the network and send one audio channel out onto the network. Depending upon how the Dante network has been routed, the incoming audio circuit and outgoing audio circuit can be different locations and the outgoing circuit can be routed to multiple locations. \u003c\/p\u003e\n\u003cp\u003eAudio to \/ from the handset is automatically turned on when the handset is off the hook and turned off when on the hook. \u003c\/p\u003e\n\u003cp\u003eThe Beatrice P1 unit is fully compatible with other manufacturers' equipment using the Dante protocol.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Amp with compressor and Phantom Power\u003cbr\u003e\u003c\/strong\u003eA good quality, clear sounding microphone amplifier designed for communication purposes is fitted to the output of the handset's microphone capsule, which also has the benefit of a compressor\/ limiter circuit to help keep levels and intelligibility consistent even when the operator gets overly excited. The gain of the microphone amplifier can be adjusted in the menu system to suit your working environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHandset Loudspeaker Amp With Volume Control\u003c\/strong\u003e\u003cbr\u003eA low noise amplifier is fitted to provide the best possible output to the handset's earpiece. A volume control is provided to allow the user to easily adjust the volume of the handset’s earpiece.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncoming Level Gain\u003c\/strong\u003e\u003cbr\u003eAs well as the volume control adjusting the audio level to the telephone handset’s earpiece, it is possible by using the menu system to adjust the gain of the incoming network audio circuit(s).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Cable For Power \u0026amp; Audio\u003c\/strong\u003e\u003cbr\u003eOne single standard RJ45 network cable provides both power (PoE) and bi-directional multichannel digital audio (Dante®\/ AES67 compliant).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCall Function\u003c\/strong\u003e\u003cbr\u003eA simple call function is inbuilt allowing the operator of one unit to call\/alert other users that they want to communicate with them. To call another user the operator double taps the speak key of the channel they want to call (P2) or the dedicated call key (P1).  This then flashes a bright yellow call LED on the other user's keypanel (if fitted), which continues to flash until the call is answered. As well as flashing a LED at the receiving end of the call, an audible ‘beep’ can be set to alert the user that an incoming call has been placed to them.\u003cbr\u003eWhen the P1 or P2 receives a call a very large red LED will flash to attract the operator's attention. An extra pair of small LEDs are also fitted on the P2 to indicate which of the 2 incoming channels generated the call signal. \u003c\/p\u003e\n\u003cp\u003eIt is possible to disable the call functionality if required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNETWORK \/ DANTE INTERFACE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical Interface: 1 off RJ45 Neutrik Ethercon\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudio Sample Frequency: 48kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudio Resolution: 24 Bit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransfer Rate: 100Mbps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDante® Chipset: Ultimo UXT-01-004\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNote: Audinate recommends no more than 10 Ultimo chipsets on one network UNLESS another Dante device such as the Brooklyn Module (found in 8 channel Beatrice\/ Dark units), is on the same network\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAES67 Compliant: The Audinate Ultimo chipset is AES67 compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConsumption: PoE: Powered by PoE Complies to: IEEE 802.3af-2003 Classification Class 0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePHYSICAL\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChassis Mechanics: All aluminium with laser etched panels and light textured black powder coated sides\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTelephone Handset: Interquartz 9826N\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize (Body excluding Beltclip): 120 x 280 x 95(inc handset 45 ex) mm (w x l x h)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 835g \/ 1lb 8oz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 2kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Size: 62 x 41 x 17cms\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShipping Carton: Rugged export quality cardboard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eENVIRONMENTAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Temperature:  0 to +50°C (32 to 122°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -20 to +70°C (-4 to 158°F)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 0 to 95% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCALL CIRCUIT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInband Calling Frequency: 20kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAmplitude: -20dBFs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDuration Of Signal: 2 seconds\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatibility: All Glensound Beatrice units \u0026amp; Studio technologies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ITEMS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHandbook: By download\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRJ45 Network Cable: 2 metre Cat5 RJ45plug \/RJ45plug cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Glensound","offers":[{"title":"Default Title","offer_id":45131566776399,"sku":"Beatrice P1","price":1389.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/files\/timthumb_c2170463-23b0-49bf-8315-2daa1f27592f.jpg?v=1776884757"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/9466\/9382\/collections\/Glensound.webp?v=1755187641","url":"https:\/\/shop.musicredone.com\/collections\/glensound.oembed?page=6","provider":"RedOne Music Canada","version":"1.0","type":"link"}